bing tracking image

Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: K2AVAL8219ELT,31108

Retail:$2,747.94
Our Price: $2,401.36
You Save: $346.58
Snow Plow

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me



Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
part number: K2AVAL8219ELT

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.

Features:

  • Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
  • Electric actuator raises and lowers plow smoothly and consistently
    • Wireless remote control lets you operate plow from the warmth of your cab
    • Internal clutch prevents damage caused by overextension of actuator
    • Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
  • Strong rubber deflector on top of plow directs snow down and away from your windshield
  • Hardened steel edge breaks up packed snow and ice
  • Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
  • Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
    • Can extend life of the plow if you hit an obstruction
  • Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
    • Wheel height is adjustable to match your vehicle height
  • Plow handle with knob lets you easily move plow up and down during mounting
  • Safety chain holds plow in raised position during travel
  • Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
  • ISO certified
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver


Specs:

  • Application: 2" x 2" hitch receivers
    • Cannot be used with hitches or receiver adapters that have built-in drops
  • Blade dimensions: 82" wide x 19" tall
  • 3 Blade angles:
    • Left 45 degrees
    • Straight ahead
    • Right 45 degrees
  • Distance from center of hitch pin hole to the front edge of plow: 50"
  • Weight: 265 lbs
  • 1-Year limited warranty


Detail K2 Plow Length

The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.


Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


Detail K2 Hitch Mount

To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


Detail K2 Caster Wheel

The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.


How to Plow

Detail K2 Adjustable Plow Position

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Smooth, Controlled Lifting with Electric Actuator

Detail K2 Elite snow plow actuator

The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.


To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.


This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.


Detail K2 Features

Detail K2 Skid Shoes

The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.


Detail K2 Blade Stiffener

Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.


Detail K2 Trip Springs

Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.



AVAL8219ELT Detail K2 Elite Hitch Mount Snow Plow - 82" Wide x 19" Tall Blade



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31108

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31108 Curt Front-Mount Trailer Hitch Receiver




Customer Satisfaction Score:


Customer Reviews

Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall - K2AVAL8219ELT

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31108

Average Customer Rating:  4.8 out of 5 stars   (116 Customer Reviews)

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: John03/30/2020
2004 Chevrolet Silverado

I had been waiting to find this Curt hitch on sale for a while.
First off I get to keep the hooks that came with my 2004 Silverado Crew cab 2500HD 4x4.
Then I removed two existing bolts and loosened a third on each hook.
Using a floor jack lifted the hitch into place and threaded in the new bolts through the frame and into the hooks.
The biggest problem I had was being able to reach the bolts into the side of the frame and hooks w/out removing the air dam.
Looks GREAT!!

I know some reviews have mentioned a reduction in ground clearance but my truck is not lifted and the clearance is nearly the same as the transmission skid plate installed by the factory.

I sometimes need to get low hard to see trailers into tight spaces and I’m also looking to pick up a winch. Looking forward to many years of hard work.

John

3/31/2021

This has made getting trailers parked closely and out of the way at job sites so much easier. Whish I hed it years ago!



by: Dale Miles01/25/2014

Unbelievable how clean the install is for this product!! I was certain I would have to do some cutting or drilling, however not a single cut or new hole required. The product fit like it was straight from the factory ... even with the existing front Grille Guard that I have on my truck!!

I also appreciate the FAST shipping and customer service, as tracking info was emailed after the product shipped without requesting this info and the product arrived within the same week.

I've already recommended etrailer to other landscapers on lawnsite.com, as we're always looking for front-mount solutions for spreaders and other landscape equipment.

Dale M.

1/28/2015

I have to say that I absolutely LOVE this product!! It works perfect for mounting my walk-behind fertilizer spreader to the front of my truck while having the larger PermaGreen spreader on the back of my truck. Having this front-mounted hitch has allowed me to carry both of my spreaders and not sprain my back while wrestling the smaller spreader out of the bed of my truck as I had before.



by: Matthew05/10/2020
2006 Chevrolet Silverado

This was the easiest installation of the 10 or more hitches that I have installed. Four bolts out and replaced with four suppler bolts and washer. No modification of the air dam needed.

I needed some washers (supplied) between the frame and the receiver as spacers. I recommended that you figure out how many you need (1 or 2 per side), then lower it down and tape them in place to hold them in place and push the bolts through the tape after you lift it back in place.

Cover the ground with a rug or cardboard to keep from scratching the receiver when it’s on the ground before you lift it into place.

Matthew

5/11/2021

Still good. No corrosion or other issues.



by: Terry11/04/2021

This was possibly the easiest hitch install I've ever done! All the holes lined up, the onle thing was two of the bolts they supplied are not long enough,I had the longer bolts in stock and finished. I haul a truck camper so needed the extra cargo space, looks like it'll work!

there was 4 bolts in the kit to replace the bolts in the tow hooks, the 2 that went into the side where the ones that where too short, they where 1 3/4" I replaced them with 2 1/4" bolts. There was a gap between the hitch mount and the frame approximately 1/16" that a washer filled that gap. I'm a retired shop owner that did auto repair and fabrication so it was an easy install.

Etrailer Expert

Jenny N.

11/8/2021

I will have our customer service team reach out to you. The hitch manufacturer prefers to have the hardware that comes with the hitch be used for warranty purposes.



by: Pat C.07/04/2020

I purchased the front hitch for my truck. With a fifth wheel I can’t carry bikes anywhere but the front. I really don’t trust the strength of the rear bumper on these RV’s. Hitch went on easy in the garage with no alterations needed. The bikes sit a bit high but that’s not the hitch problem....
I will also use it for other functions around the truck...push/re-locate utility trailer in tight spaces, use for a rack to haul stuff like firewood etc...when back hitch is unavailable.



by: David07/27/2022

Easy install; unobtrusive, but hitch receiver is far enough forward I can install the bike rack without needing an extension.



by: Wayne10/06/2022

Great product easy installation reinforces your front end will definitely buy again for my next truck



by: Hans11/09/2013
2003 GMCSierra

This is the second hitch I've ordered for my truck. This hitch was very easy to install on the front of my GMC Sierra and is almost unnoticeable, which I like. I use it to transport a small Honda Trail 90 motorcycle, and it's 9000lb rating is well above what I am asking it to do. It arrived via UPS several days after ordering, was in good shape, and only took ten minutes to install with only two different size socket wrenches. Highly recommend this unit for the front of any truck.



by: Charlie P02/08/2014
2004 GMC Sierra 3500

The 31108 Front Mount Hitch Receiver was a perfect match for my 2004 GMC Sierra 3500. I seemed well built and the instructions were clear and easy to understand. I installed the hitch in under 45 minutes and that includes prep time. No special tools required. See photo attached.



by: Carlos02/20/2021

This thing is fantastic! My girlfriend and I put this thing together. It is perfect for keeping up with a storm. It is sturdy, takes a beating and keeps on going. I have a 2014 Ram ecodiesel. Would not use this plow setup for professional jobs however, only because it isn’t heavy enough to plow through mounds of snow covered ice. And when I say mounds, I mean 2 feet high and dense. Only drawback was shipping: I never received a tracking number from the shipping company but it did ship right away and was delivered in the time frame I was given. Enjoy guys!



by: Dahr05/21/2024

This fit my 2006 Silverdo 3500 easily - and it has been a great addition to be able to carry my motorcycle in front of the pickup while camping.



by: Chris12/22/2023

I waited 12 days for a shipment from amazon and the hitch was lost. They want to send me another hitch with a due date of January 6, 2024! You guys are the best! 2 day’s service was outstanding!!!



by: Bill Schmall 06/26/2014

I would add to your instruction, if you have the factory hooks, remove the four bolts as stated and give to customer, " loosen the other two bolts on the outside of frame" this gives you a little wiggle room to start the new bolts. BUT great product and great people.



by: Alfred 12/28/2022

Fit great lineup no modifications happy with the results

Alfred

1/31/2024

Wonderful very satisfied with the sales department and the quality of the product



by: Doug05/16/2020

This hitch mounted to tow hooks just as described, even with existing brush guard. Needed it to haul a generator the only issue was the brush guard stuck out too far so I had to buy a 12" extender. Now every thing works as planned. Shipping was fast and customer service was great.
Thank You



by: Brian02/22/2019
2006 Chevrolet Silverado

Very good quality, Heavy Duty hitch that looks easy to install.
Ian W was very helpful with my order and customer service has been great.
This hitch fits the Chevy Silverado 2500 and 3500 I believe. My Chevy is a 2006 model.
I highly recommend Curt hitches and ETRAILER.COM.
Brian

Brian

2/26/2020

The front hitch was easy to install and has been very useful. I just wished the 2006 Chevy Silverado had more clearance as far as height goes on the front end.Mine is a 4x4 but it could sure use a lift kit. The hitch is great though!



by: Chuck04/22/2024

You sent me the wrong part.



by: Rod S.09/09/2013
2005 Chevrolet Silverado

15 minute, piece of cake single-handed install. Instructions say cutting fascia optional on 2500. Not even close to needing to. Truck is 2005 Silverado 2500HD. Receiver sits up there nice and tight, so doesn't change ground clearances.



by: John 09/16/2023

Hitch is in excellent condition even though it tried to get out of the box.



by: Rusty M03/25/2018
Chevrolet

Front hitch for 2005 Chevy 2500hd that I ordered from etrailer.com



by: Bill 10/15/2023
2003 GMCSierra

Repetitively easy to Mount and was still able to keep the factory toe hooks installed



by: Peter12/16/2022

I did not get a chance to put it on right away. Now that I have put the front hitch on , it looks great. It was harder getting the original old bolts off than it was putting on the hitch. The hitch went on quickly and now I can use it to put a plow on for these snowy Ohio winters.



by: Andy G01/13/2015

I received the product (hitch) today and haven't had the opportunity to put it on my truck. I hope to do that this week or next. I can write an additional review at that time. Wayne H. did a great job clarifying which hitch would be best for my needs. I'll summit a picture after it is installed.

Andy G.

1/13/2016

I love the product. It has come in lhandy many times when moving my trailer and boats. I would definitely purchase another if I ever purchase another truck in the future. I would recommend this product to anyone.



by: Bob 01/30/2023

Easy install, the bolts that went into the recovery hooks were about 1/2” short and couldn’t get the threads to bite



by: Scott03/12/2023

I installed the hitch with no problems, looks great. The item was poorly packed for shipping and I consider myself lucky to see it arrive.


25
116
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


Info for these parts were:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


GMC Sierra Accessories




Product Experts Available Now!
Call 1-800-940-8924