SnowBear Plow for 2" Hitches - Electric Actuator - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: SB324-168,31352
Retail:$3,099.26
Our Price: $3,030.77
You Save: $68.49
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meSnowBear Plow for 2" Hitches - Electric Actuator - 82" Wide x 19" Tall
part number: SB324-168
Remove snow quickly from your driveway or parking lot with this hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric actuator raises and lowers plow smoothly and consistently
- Internal clutch prevents damage caused by attempting to under- or overextend the actuator
- Simple, chain-lifting design has fewer moving parts than a winch
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
- ISO certification ensures consistent, quality manufacturing
- Assembly required
Specs:
- Application: 2" x 2" front-mounted trailer hitch receiver
- Blade dimensions: 82" wide x 19" tall
- Height adjustment: 9"
- 3 Blade angles:
- Left 22 degrees
- Straight ahead
- Right 22 degrees
- Actuator lift capacity: 1,000 lbs
- Weight: 370 lbs
- 1-Year limited warranty
Note: Due to the size of this item it ships via truck freight.
The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.
324-168 Snow Bear Pro Shovel Snow Plow for 2" Hitches - Electric Actuator - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31352
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
Tech Tip: Hitch mounts below the plastic air dam, below the bumper.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31352 Curt Front-Mount Trailer Hitch Receiver
Customer Reviews
SnowBear Plow for 2" Hitches - Electric Actuator - 82" Wide x 19" Tall - SB324-168
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31352
Average Customer Rating: 4.7 out of 5 stars (70 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Jason01/27/2018
2015 Ford Explorer
I purchased a SnowBear Proshovel Snowplow and a 2" Draw-Tite Front Mount Trailer Hitch Receiver for my 2001 Ford Explorer Sport Trac. The front mount hitch receiver was a breeze to mount to my vehicle. Literally 15 minutes from start to finish. When the SnowBear plow arrived I was a little apprehensive, as it came in 3 separate boxes and some assembly was required. The directions included were phenomenal, easy to understand and took you through complete assembly step by step. This has been a wonderful experience and I could not be happier.
by: Michael 06/12/2024
Haven’t installed it yet but I can not believe how fast I got the hitch, thank y’all so very much, finally can put my surf rod rack on the front of my truck, watched the video yesterday, looks pretty simple for one person to install, thanks again
by: Charles 04/25/2024
This thing is well built, it fit perfect, This will come in handy for my needs. Instructions are very clear. If I was to rate the install on a 1 to 10 scale it would be a 5. Fishing the bolts thru the frame with the wire provided was much easier than I expected. I do recommend this hitch.
by: Neil08/19/2020
2006 FordF-150
the install went very good but i do have one suggestion and see if your maker can put a notch in the middle hole to look like the tow hook it would make the install way more user friendly also had a little problem with one of your bolts after i had fished it down the hole the treads were burred and the nut wouldn't go on all the way so i had to fish it back out what a pain that was but got it done and replaced with one of the other bolts that you supplied me with and it went on great. now i have a ? about the hitch height mine only sits up at about 11 inches and change will that work with your snowplows that say they need 13 inches or will i have to do something different? but thanks for the great turn around time in getting it here quick.
by: Luke T>06/28/2017
This thing has been just fine. It's been a great mount for my winch. Only problem is I've been too lazy to put my bumper back on.. :)
by: Mike B.08/04/2014
This hitch mounted up in less then 10 minutes. I love it and it looks great.
by: Robert 10/20/2023
2007FordF-150
Well made and easy to install. All of the necessary parts were included and the video on the product page made it a breeze to install. Working on my driveway with no lift. I am 73 and used a floor jack to lift it and hold it in place until the first two bolts were in place.
by: Jerry C06/03/2024
Extremely easy to install
by: Donald 10/30/2023
It has been a good send for moving a trailer around especially in close surrounding
by: Bob07/22/2019
2005 Ford Expedition
The hitch seems to be excellent. I have not yet been able to install it because the bolts, etc supplied with the hitch are useless because there is no way to insert them through the frame rails due to the slot id too small to accept the bolts. I am tempted to use the factory bolts, but I am fearful of allowing the factory nut assembly to slide away from the holes making them inaccessible.
I think the better application would be to supply and use stud bolts which would allow installation without risk of inaccessible nuts inside the frame rails. This is what I intend to do when I can purchase the studs
by: Pat09/08/2022
this item bent down to a point that the receiver part is barely off the ground. i contacted you guys and you told me that this was because of the plow itself and was not built strong enough to hold plow up during plowing. very disappointed with this since you sold me both items. cannot plow with it like that. i sent you pictures but you seemed not interested.
Heather A.
9/26/2022
Please keep in mind this hitch is designed for only 500 lbs of vertical load. Most plows weigh close to 300 lbs without the weight of the snow.
by: Eric04/17/2013
2004 FordF-150
This is a great quality hitch that was easy to mount. Probably would help to have a buddy help hold it in place while mounting, but it wasnt that hard by myself. I finished in less than 1/2 hour and It didnt require any modifications to my 04 F-150 s-crew Lariot 4x4. Its nice to have the option to push a trailer from the front if its ever necessary, but that wasnt my motive for purchasing. I bought it to hold a bike rack and possibly a small motorcycle when towing our travel trailer. Works great, but if you have something extended out low in front of your truck, like a cargo rack, or tires from those 3 bikes, always remember they are there and drive accordingly. Even approaching a steep driveway can be a potential issue depending on your rack design and specific situation. Clearance should not be an issue for average light duty users. Great product and fast shipping from etrailer.com.
by: Russell 03/20/2021
I purchased the Front Mount Trailer Hitch because of the tricky parking of my trailer. It has performed flawlessly - if you call saving our marriage while using it to park the trailer by the side of the house. Haven't had to call a divorce lawyer yet!
The hitch was a snap to install using the clever install 'wire' to place the bolts in the exact position. I'm getting old and don't get up and down to easily but installing this hitch was done before I broke a sweat.
Excellent product with easy install - a complete win.
by: Jeff08/29/2015
2007FordF-150
Good price super fast shipping. Took longer to get the truck on the ramps and get the tools ready than it did to put in on. Very easy to install and the video is helpful. time to install it was about 15 min.
Jeff
8/28/2016
Still working great I use it 2 or 3 times a month in the summer to get the camper in and out of the alley
by: Rick B03/27/2015
2005 FordF-150
I like to tackle these kind of DIY projects but often find myself in over my head. Fortunately I have a couple of friends who bail me out without too much grief. This trailer mount arrived before I expected -nice- and I figured it would be a couple evenings work. One to remove the current fasteners and tow hooks and the second to reinstall w the mount. To my great surprise I had everything done in about two hours. It went together exactly as the video showed and there were no, none, zilch issues. The heads of the fasteners on my truck were 15mm and reusing them was easy. And I did not have to trim the plastic under my bumper!
Great job etrailer.com, thank you!!!!
by: Tito A.12/02/2011
2003 Ford Expedition
It's was extremely easy to install I did it myself in about 15 minutes . And it looks great
by: Too Low06/22/2013
2008 FordF-150
Well I got time today (6/22/2013) to put this front hitch on to my 2008 F-150. The installation was simple. The only trouble was the Bumper. I Had to take it off but that really wasn’t That bad. The only thing is that the Hitch hangs too low. It is the lowest thing on my truck now. I would like it if it was welded to the top of the cross member instead of under the cross member then I would have needed to cut a hole in my bumper but that would be OK with me. This is a nicely made product and good welds. It will work just fine just wish it was not so low.
by: Dave B.06/07/2017
FordF-150
I can't say enough about how great this hitch was packaged. Nice box, no rattling parts. Installed in about an hour on driveway. Everything went together smoothly. This is a front mount hitch for my F150. I can now use my hitch mount winch on front and rear. This is my 2nd or 3rd purchase from etrailer, would recommend to anyone.
by: Andrew M.03/17/2015
2007FordF-150
Fit the truck perfectly. Shipped quickly and in strong packaging. All the necessary parts were included. The video on the website was awesome and made the install so much easier. I ordered a separate hitch for my car from another company since it was a few dollars cheaper and I am still waiting for it.
I will be (and would recommend) sticking with etrailer in the future.
by: Curt Front Hitch-2004 F15001/13/2012
2004 FordF-150
It arrived in 2 days-a day earlier than expected.A nice hitch indeed.The powder coat was thick and it looked sharp-heavy duty quality for sure.I haven't installed it yet-but it should be a breeze with just 6 bolts to put inI'll be back for more goodies!
Chris L.
4/23/2014
Where is it made?
by: Tom W.02/22/2012
2008 FordF-150
This product is perfect. Took longer to get my tools out then it did to bolt the hitch to my 2008 F-150. Everything fit first time, without modification. Didn't even need to get out my big hammers! The glossy paint job looks really nice too.
I ordered the hitch and it arrived the next day! Spooky. Almost supernatural like customer service. If the shipping had been any faster it would have arrived before I ordered it! Their web site is massive. Any outfit that puts that much time and money into a web site is serious about doing it right. etrailer.com is definitely a keeper.
by: Ron C.08/18/2016
Worked perfect for my application, I use it to mount a motorcycle rack on the front of the truck so I can also pull my travel trailer!
Ron C.
8/18/2017
Still working out great!
by: RON H.02/07/2015
I began searching for a front mount trailer hitch receiver and went to a couple of RV supply stores to inquire. The cheapest store was Camping World which I am a Good Sam Member. Their Member price was $199.00 + $16.92 Tax plus Shipping charge between $49 To $69. Worst case would have been $284.92 and I would have to pick it up at their Store. I went online and found the exact same receiver at etrailer.com For $159.00 total price. No Tax and free shipping to my door. It was delivered 4 days later. Easy installation & great service! I just placed another order from them for an excessory I wanted. I highly recommend E TRAILER.COM first for any RV or Sports equipment you need.
by: Rich07/17/2018
With this monster trailer I have, the front hitch is the only way I can get the trailer back into its parking spot. Great purchase and was a piece of cake to install.
Thanks for asking
25
70
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Are Skid Legs Included With The SnowBear Proshovel Snowplow
- In the video you referenced Randy is using the SnowBear Proshovel Snowplow - 84" Wide x 22" Tall # SB324-172. At the 4:45 minute mark he shows you how to lower the skid legs so that you can unhook and slide the snow plow away from your truck for storage, and goes on to say that you can get the optional casters # SB324-126 as well to make it easier. The skid legs will be included with your snow plow kit but the casters will be a separate item.
view full answer... - Comparing SnowBear Snowplows with Electric Actuator and Snowplows with Electric Winch
- Both the SnowBear Proshovel Snowplow, with Electric Actuator # SB324-168 and the SnowBear Personal Snowplow, with Electric Winch # SB324-080 will allow you to easily raise and lower the snowplow, and both come with an in-cab toggle switch, as well as a wireless remote, so that the plow can be controlled from the comfort of your vehicle.
SnowBear markets the plow with the electric winch as a personal/residential winch, and the plow with the actuator for more larger scale plowing needs.
view full answer... - Is There an Install Video of the Curt Hitch 31352 On a 2003 Ford Expedition
- I have attached an install video for you of the Curt Front Mount Trailer Hitch Receiver part # 31352 on a 2007 Ford F-150. This will be very similar to the process you will need to follow on your 2003 Ford Expedition but as we have not had the chance to install this hitch on your exact vehicle, I have no video to send you on this.
There is also a set of installation instructions in text form which are attached that you can look over to see if you will be able to install the hitch yourself.
view full answer... - Is Fascia Trimming Required for CURT Front Trailer Hitch Installation on a 2004 Ford Expedition
- When installing the CURT Front Mount Receiver, # 31352, trimming of front air dam or fascia may be required for hitch installation. Since the Eddie Bauer edition may included some additional appearance panels in the front, it is likely that some trimming will occur. I have included a link to the installation instructions for you to take a look at and compare to your Expedition.
view full answer... - Front Mount Trailer Hitch Receiver for a 2006 Lincoln Mark LT
- The installation instructions for Curt front mount receiver # 31352, see link, do not specify any vehicle modification for installation on your 2006 Lincoln Mark LT. But it is always possible that some trimming of an air dam or fascia may be needed on some models.
We also have Draw-Tite hitch # 65043 which should not require any modification. The receiver will sit below the front fascia. I have linked videos and instructions for both hitches for you.
view full answer... - Capacities of the Curt Front Hitch part # 31352
- The max vertical load that the Curt front hitch part # 31352 is rated for is 500 lbs. The max trailer weight it is rated for is 5,000 lbs.
view full answer... - Distance From Mounting Hole to the Top of Receiver Tube on Curt Front Mount Trailer Hitch Receiver
- The distance from forward mounting hole down to the top of the receiver tube on the Curt Front Mount Trailer Hitch Receiver # 31352 is 4.5".
view full answer... - What Size Are Carriage Bolts Used When Installing Curt Front Mount Trailer Hitch
- The carriage bolts that are included with the Curt Front Mount Trailer Hitch, part # 31352 are 1/2 inch.
There are three bolts used on each side of the trailer hitch, and are installed in existing holes in the frame of the vehicle.
view full answer... - Does Curt Front Mount Trailer Hitch For 2008 Ford F-150 Come With Necessary Hardware for Installatio
- Usually our pictures show all of the hardware that come with the hitch. For some reason the # 31352 pictures only show the two bolts, nuts, and spacers. You actually get six of each as listed in the instructions which I have attached below. You do not need to supply your own bolts for installation.
view full answer... - Mounting Curt Front-Mount Hitch Receiver #31352 on 2005 Ford Eddie Bauer 4WD Expedition
- This front-mount hitch receiver, part # 31352, is the correct specified part for your 2005 Ford Expedition 4WD. I spoke to my contact at Curt Manufacturing regarding the third mounting hole, which evidently is missing from your Expedition.
I am told that although this does not happen often, on occasion the vehicle manufacturer may omit the step of punching this third mounting hole. If your expedition lacks this third hole you will need to drill the frame rails.
You should temporarily
view full answer... - Front Mount Hitch Recommendation for a 2014 Chevy 3500
- I do have a front hitch that will work on your 2014 Chevy 3500 Silverado, but the Curt hitch # 31352 that you referenced is not a confirmed fit for you vehicle. You would want a Curt Front Mount Trailer Hitch # C31023. This hitch has been confirmed to fit your vehicle.
I attached an install video and instructions for you to check out also.
view full answer... - Will Curt Front Mount Hitch # 31352 Fit a 2006 Ford F-150 XL 4x4
- I spoke with my contact at Curt to confirm fit and front mount hitch # 31352 will fit the 2006 Ford F-150 XL 4x4. I have included a link to the installation instructions for you to view.
view full answer... - Are Existing Tow Hooks Removed When Installing Curt Front Mount Hitch # 31352 on a 2004 Ford F-150
- The tow hooks will need to be removed but will be replaced when installing the Curt Front Mount Trailer Hitch Receiver, item # 31352, on your 2004 Ford F-150 4x4 Supercrew, 5.4 w/Tow Package.
I have provided instructions for you to review below.
view full answer... - Can Westin Bull Bar and Curt Front Mounted Receiver Be Installed Together on 2005 Ford F150
- I've looked over the installation instructions for the Westin # 32-1395 Bull Bar and the Curt # 31352 front mounted receiver. It looks like both parts will work together, but as you said, you'll want to remove the tow hooks and leave them off.
Keep in mind that we haven't tested the fit, nor has Curt or Westin, so we can't make any fit guarantees.
I've linked you to the installation instructions for the Westin Bull Bar.
view full answer... - Fishwire Technique for Installing a Front Mount Trailer Hitch on a 2005 Ford F-150
- Using the fishwire bolt leader that comes with the Curt front mount hitch # 31352 is the best way to get the hardware into place. The instructions have a brief description of the fishwire technique but until you see how it is done it does not make a lot of sense to some people. I have included links to an FAQ and video covering the fishwire technique.
view full answer... - Do You Carry a Front Mount Hitch for a 2000 Ford F-150
- We have 2 front mount hitches available for the 2000 Ford F-150. The first is Draw-Tite part # 65025 and it will fit both 2WD and 4x4 models. The second is Curt part # 31038 but it will only fit 4x4 models.
view full answer... - Is Fascia Trimming Required to Install a Front Mount Receiver on a 2005 Ford F-150 4x4
- The Curt Front Mount Receiver, item # 31352, has a 9,000 Lbs. Max. Line Pull, and lower fascia trimming may be required on some models. The part that may need to be trimmed is the plastic fascia that is attached to the bottom of the chrome bumper on some models. If this plastic piece is not installed on your vehicle you will not have to trim with the Curt receiver.
The Draw-Tite Front Receiver, item # 65043, for your 2005 F-150, has a 9,000 Lbs. Max. Line Pull rating also, so it is
view full answer... - How To Measure For Ground Clearance On 2006 Ford F-150 For Front Hitch
- The Curt front hitch, part # 31352 may require trimming the plastic fascia that is attached to the bottom of a chrome bumper. If your bumper does not have that added fascia, trimming is not required. Per the attached installation video the distance form the top of the receiver to the ground is 20-1/4 inches.
The Draw-Tite Hitch, part # 65043 does not require trimming the front fascia when in stalling. It does sit just a bit lower to the ground than the Curt hitch, but it does feature
view full answer... - Will the Curt Front Mount Hitch 31352 Fit a 2004 Ford F-150?
- The Curt Front Mount Hitch # 31352 is specifically designed to fit F-150 Trucks from 2004 to 2008 and will measure 33-3/16 inches from the center to center of the bolts across the hitch, and then 3 inches between the first and second bolt holes, and then 3-1/8 inches between the second and third bolt holes on the frame brackets.
The tow hooks do indeed need to be removed, but will be installed again when installing the # 31352. They will actually sandwich the hitch between them and the
view full answer... - Front Mounted Hitch for 2003 Ford Expedition 4x4
- The Curt Front Mount Trailer Hitch Receiver # 31352 is not a fit for the 2 wheel drive 2003 Ford Expedition. It will only fit the 4x4 model. I called to confirm with my Tech contact at Curt and he said the mounting isn't the same because the bumper is different and the tow hooks are required.
Unfortunately we do not have a front hitch fit for a 2WD 2003 Ford Expedition currently available from any of our manufacturers. The best option is to use something like the Curt Adjustable
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rachael H.
7/24/2019
I did want to let you know that this front mount hitch is designed to use a fishwire technique where you route a wire through other holes in the vehicle frame, and attach the correct hardware, then pull the wire back through to place the hardware in the correct location for installation. We do have a an installation video on a similar vehicle for your reference, I have provided a link to this video and the installation instructions for your reference.
Helpful Links
://tv-install-trailer-hitch-2007-ford-f150-31352.aspx
https://assets.curtmfg.com/masterlibrary/31352/installsheet/CM_31352_INS.pdf