How To Measure For Ground Clearance On 2006 Ford F-150 For Front Hitch
Question:
Can you tell me if there is any difference in ground height of front hitches curt or drawtite for 2006 ford f150 thanks
asked by: Larry R
Expert Reply:
The Curt front hitch, part # 31352 may require trimming the plastic fascia that is attached to the bottom of a chrome bumper. If your bumper does not have that added fascia, trimming is not required. Per the attached installation video the distance form the top of the receiver to the ground is 20-1/4 inches.
The Draw-Tite Hitch, part # 65043 does not require trimming the front fascia when in stalling. It does sit just a bit lower to the ground than the Curt hitch, but it does feature a second set of holes you can mount the hitch with that gives you more ground clearance. If you park your truck on level ground then measure from the ground to the bottom of the bumper and subtract 2-1/2 to 3-1/2 inches. That would give you an approximate distance from the ground to the bottom of the hitch.
My recommendation is for the Draw-Tite hitch, part # 65043 because it will not require trimming the fascia.
Products Referenced in This Question
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern
- Q&A: Installing a Brake Controller and a 7-Way Trailer Connector on a 2005 Ford F-150 With Factory 4-Way
- Q&A: Replacement 7-Way Wiring Harness for 2005 Ford F-150 with Factory Tow Package
- Q&A: What is the Fuse Rating and Power Wire Gauge Used for Trailer Wiring Harness # 118571
- Q&A: Recommended Spare Tire Cover for 265/70R17 Size Tire
- Q&A: Raising Trailer with Welded On Torsion Axles
- Q&A: Distance From Hitch Pin Hole to Gusset on Curt Ball Mount C45112
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Replacement Automotive Lighting
- Article: Best Bike Racks for Electric Bikes
- Article: Anti-Rattle Devices
- Article: How to Mount a Truck Bed Camper
- Article: How to Choose a Hitch-Mounted Bike Rack