Part Numbers: TLD2101,TLR3500
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (3249 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
I originally ordered the incorrect rear Torklifts camper hold downs for my truck. However, I called etrailer and explained my error. They not only helped me pick the correct ones, they sent them out that day. I haven’t installed the rear TC hold downs yet. I was most impressed with the free shipping both ways with no questions asked! I was issued an RMA and the refund came quickly. Very good customer service in an age when there often isn’t any service , let alone great service. The front mounts fit perfectly!
Installed on a Curt 2 1/2 receiver just put on my F350 SD Supercab Diesel SRW 4x4. This bracket does fit this truck with the Curt receiver. I found a little oil on the drill bits and a reamer to remove the last bit of metal from the holes in the receiver helped mount the brackets.
Installation was easier than I expected. Fit my 2006 Dodge Ram 2500 perfectly.
Great product and helps us a great deal. It fixes our camper tie down issue.
Easy to install. Good quality construction. Great customer care when I ordered the incorrect version - was well handled.
Fast service. I got my order in 2 days where other places were saying it would take up to 10 days.
Delivery was fast. Works perfectly for our Lance slide-in camper.
looks good, easy to install and replaced the torklift tie downs used on factory hitch, now I have a 20,000 lb trailer hitch with 2,700 GTW also. and camper is secure.
Edward J.
8/25/2017
Fantastic, just like they were claimed to do
These camper tie downs are quality made. Very easy to install. Install time was under two hours. Shipping was fast as always.
Nicole at etrailer was sharp and the products - 5 stars for her
The Torklift instruction pictures are poor - look like they have been copied 100 times.
Front brackets were fairly straight forward - but had to remove a skid plate and loosen the fuel tank to install the drivers side.
Rear brackets needed to drill holes. T L should provide a drill template.
Haven’t used with the camper yet.
After reviewing my options to hold a 3500lb trailer on my truck. I decided these were the only option. They are more expensive then the other options that bolt to the body and the bumper, But much more secure.
The install was fairly easy, Customer service from etrailer was awesome. When not in use they are barely visible. Great product, worth every penny!
Thanks again
Great Service! Correct product. etrailer is an awesome company
Super easy to install, I recommend using some masking tape on the hitch to mark where you want to install these.
Both the product and the service are top notch. I ordered the front and rear tie-downs for a 2006 Silverado. The easy to follow instructions made it easy to install the customized tie downs. We have been on the road several times since I installed the tie downs and all the miles I've traveled were with confidence that my camper was secure.
Oh, the other great feature is that they are removable when not in use.
Thank you etrailer!
Perfect fit on Ram 3500. They have now traveled across the country and back to MI. A very positive way to secure our truck camper. It never moved
Part of an order I made for camper tie-downs. Great product and it shipped extremely fast!
I always go to e-trailer first when looking for truck towing or other truck accessories. The customer service and speed of shipping really can’t be beat.
Working with Etrailer has always a been a good experience for me. They are the first place I look when it comes to my towing needs due to their competitive pricing, free shipping, and excellent customer service. I've purchased receiver hitches and towing accessories for my trucks, lights for my camper and parts for my car trailer - If something is back ordered they are good at keeping you up to date with your order status.
Robust. Easy to install. Only issue is that when not in use the tie downs rattle due to excessive amounts of play in the mating parts. Perhaps a UHMW shim/sleeve between the male and female mating parts would alleviate the issue. I just ended up removing the male end when not in use. However doing so brings up another problem which is the female end fills up with dirt and mud. To alleviate that problem plastic plugs/caps needed to be purchased. I just install/remove the caps each time the tie downs are used.
Solid, easy to install. etrailer is the only site i even look at now.
Excellent tie downs. Work great on my 2004 3500 Dodge Ram dually..
The Torklift receiver hitch and system for securing a slide in camper is a great product.
I just received half of my order and the quality looks nice. My problem is with etrailer. I ordered the tie down for my camper from them because the website said they are in stock and that they would be to me in plenty of time to install for my trip. After I recurved my package I realized the order was incomplete and only one half of the tie downs were there. After over an hour of waiting on hold and dealing with customer service I was pretty much told that it was my problem and out of their hands because they arranged for the other tie downs to shop from the manufacturer. Now I find out that the product is out of stock with the manufacturer’s day I won’t receive it for at least 10-14 more days. Which is after my trip that I need these for. And the worst part is that they’ve already charged me for the complete order and left me with no option to correct the problem other than paying an extra $200 dollars for another product and an extra $128 in expedited shipping fees to get it in time. They did off to split the shipping cost with me but customer service manager I spoke to on the phone was rude and condescending and did not offer any viable solutions. I have been a long time customer of etrailer but will not be purchasing from them again because of this. Buyer beware!
Installation on the drivers side of my 2005 2500 diesel was not as east as described. The tank is very close, perhaps 1” from the frame rail making it almost impossible to insert the bolt, washers and backing plate through the holes. These items need inserted in order to pull them through the frame. I needed to insert wedges between the tank and frame to make enough room. This concerned me as I did not want to puncture the tank. If I was unsuccessful with the wedges I was just going to use a longer bolt that went through the entire frame rail. I’m not sure if this would have provide the same strength, but it would have provided a solid anchor. I’m sure these will perform, but they are extremely pricy.
Ask the Experts about this Truck Camper Tie Downs
Do you have a question about this Truck Camper Tie Downs?
TorkLift Accessories
Fit to this rack on your 2007 Dodge Ram Pickup
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott
3/24/2023
Still working great after a year. No issues.