Part Numbers: TLC4204,TLC3216
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (3226 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.
Installed on Chevy 2018 3500HD with factory nerf bars. Gnarly installation. Drivers side was difficult. There was one bolt that I couldn't access the back side because the gas tank is in the way. I was able to install these but I'd recommend professional installation. Holes in brackets do no line up well, like 3/8" off. Driver's side bracket also interferes with the park brake cable, instructions have you zip tie the park brake cable to the hose above, so when the park brake is actuated it moves the hose along with the cable. This shouldn't be done like this. Overall, poor engineering.
Was an opened box and missing two 3 1/2 bolts I had to go buy. Sturdy product. Quick Delivery.
I have purchased many TorkLift products from eTrailer, all of which have performed as expected. The installation instructions are thorough and easy to follow. eTrailer product support and customer service is second to none. Thank you for your continued reliability.
I have to thank you and Will who helped me on the phone and your company at etrailer you are truely a great company and had helped me get the correct parts after a parts being missed boxed knowing it wasnt not etrailers fault i will continue to use and support etrailer for all the great work thank you again
Fairly easy install, received the wrong parts, but was sent correct parts right away. Customer service was great. My only complaint is the paint on all 4 brackets has either fallen off, or in the process of falling off. These should be powder coated. Because of this, they are now covered in rust, joys of living in northern New England
The application took dexterity in fishing bolts/spacers and washers through the frame. That is the price to pay for a drill-less install.
Harry and Harriet Homeowner can install this in their garage without a lift.
The final result is excellent - inconspicuous and strong on our 2015 GMC 3500HD
Thanks Katherine everything was still in the box just installed the torklift hitch it fit perfectly thank you for your help with my order awesome customer service.
Fit perfect and tie down a heavy truck camper.
Could not be happier with the quick service I received from etrailer and outstanding product I purchased. The install was a breeze with the easy to follow instructions and I am now able to stay wherever it is I am playing! Thanks for the great prices and good service ??
The frame brackets have been working great although the tiedowns took a turn after eight months
Installed easy
Love them and easy to install
I'm surprised by the great quality of these mounts.
great product
Everything that I have purchased from etrailer came in on time went together easily no problems at all
Fit well, long term finish and quality leaves plenty to be desired, after 5k miles in a year and being stored indoors finish is peeling and rusty on the edges
Fit perfectly! Works great keeping my camper on the truck and very little shifting.
They work great !!! Very satisfied with the quality of the products and your customer service.
works as described and love it. keeps a clean look during and when not in use
So easy to install, look great on the t ruck
Awesome customer service !
The product is well made and easy to in stall
Great people to buy from, customer service can't be beat!!!
Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
TorkLift Accessories
Fit to this rack on your 2019 Chevrolet Silverado 3500
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado 3500 Accessories
Victoria B.
5/4/2020
To help extend the life of your tie-downs and prevent further rust, you can clean off the rust at the edges and cover any bare metal spots with a black, rust-inhibiting spray paint.