Part Numbers: SS48GV,C31071
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
84 x 18 Heavy-duty plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path over concrete, gravel, and grass. Side scoops catch more snow with each push. Aluminum blade can be manually angled to either side.
Features:
Specs:
Installation is quick and simple - just slide included shank assembly into your 2" receiver and secure with pin.
Then lift the blade, one end at a time, onto the frame's holders and fasten with snap pins.
The SnowSport HD blade is mounted on an angled, 3-position shank assembly, allowing you to plow to the left, to the right or straight ahead.
To plow, lower the blade and begin driving; no wiring or hydraulics are needed. The unique push frame on the shank assembly allows the blade to move along the grade of the terrain for easier, more efficient plowing. The heavy-duty rubber cutting edge is effective yet turf friendly, collecting snow and squeegeeing slush without digging into the ground.
When you reverse direction, the blade lies back, skimming over the surface of the ground so that you can easily take another pass.
Once you're finished plowing, just lift the blade and refasten into the travel position. The blade is secure enough to travel at highway speeds, and the low-profile design keeps it from blocking your vehicle's headlights. Removal for storage is quick and easy. The plow can be used on the rear of your vehicle, making it a cinch to back out of your snow-packed driveway.
California residents: click here
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2018 Chevrolet Silverado 2500, we're going to be installing Curt's Front Mount Trailer Hitch Receiver, part number C31071.This is what our hitch is going to look like when it's installed. As you can see, it's tucked up underneath our front bumper, so you're really only going to be able to see the receiver tube and it's tucked back far enough where you almost don't even notice it's there. It's got a 2" x 2" receiver end, so it'll work with any of your favorite accessories such as winch plates, snow plows, or over-the-bed extenders. It uses a 5/8" hitch pin and clip. One doesn't come included, but you can pick one up here at etrailer.com with part number PC3.It has a 500 pound tongue weight, a 5000 pound gross towing capacity, and a 9000 pound straight line pull. Now to help you when deciding on accessories, I've got a few measurements for you.
From the ground to the top inside of the receiver, it's going to measure about 10-3/4". From the center of the hitch pinhole to the front edge of the front bumper, it's going to measure about 9-1/2".We'll begin our installation at the front of the vehicle. We're going to have to remove a couple bolts that hold our tow hook on. We're going to be using those bolts to secure our front mount hitch. We'll use an 18mm socket and remove the bolt in the front of the frame just below the tow hook.
You'll do that on both sides.Next, we'll take the fish wire provided in the kit. We'll go through the small hole here located just in front of your sway bar, and we're going to bring it back and come out the square opening just above the sway bar. Next, slide a spacer over the coiled end and thread on one of the carriage bolts provided in the kit. Push those into the frame and pull your fish wire back through. Now, we do want to actually poke it just so it's right back in to make it easier to get our hitch into position, and we'll repeat that same process on the other side.Now with an extra set of hands, we'll lift our hitch into position.
Make sure you feed your fish wire through from the inside of the hitch towards the outside. We'll then lift our hitch up into position, use the fish wire to pull the bolts towards the outside, and once you've got both bolts pull out on each side, the hitch will support itself making it easier to install the rest of your hardware.Now, we'll install our bottom bolts first. These are the ones that we had just removed from our tow hooks. Once both of your tow hook bolts are installed, take your fish wire off the carriage bolts that we had slipped through the side, and when you're taking these off, be careful not to push the bolt back into the frame. I like to keep a little pressure on it as I'm removing it and while I'm installing the nut.
Use the nut provided in the kit to thread onto the carriage bolt, and you'll do that on both sides as well.Now tighten and torque all of your hardware to the specifications in your instructions. The carriage bolt nuts you'll tighten with a 19mm socket, and you'll tighten and torque the lower bolts that we're for our tow hooks using an 18mm socket. Now that you got your hardware tightened down, you're ready to hook up your favorite accessories and hit the road. That completes our installation of Curt's Front Mount Trailer Hitch Receiver on our 2018 Chevrolet Silverado 2500.
Average Customer Rating: 4.8 out of 5 stars (126 Customer Reviews)
84 x 18 Heavy-duty plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path over concrete, gravel, and grass. Side scoops catch more snow with each push. Aluminum blade can be manually angled to either side. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.The hitch was well-made, and installing it was very easy. However, the design of the hitch is somewhat perplexing. The hitch receiver hangs about 3 inches lower than it needs to, which reduces the ground clearance on the front of the truck significantly. See attached photos. The hitch will work until I find something better, That restores the front ground clearance
Well so far so good. It was a little difficult trying to do it by myself, got most of it done and then had to go to a autobody shop down the road to tighten up the 4 bolts.
Bob
5/26/2023
It worked out great! We traveled to Key West from New England with only a couple of problems. Watch out for dips in the road, curbstones, large tree roots.
Have not opened the box yet, but am hoping for a perfect fit. Excellent communication on my order and delivery status…5-Star rating on customer service
Scott
6/4/2024
Awesome! Works great and I just used the front hitch to put a boat away in very tight quarters.
The hitch is mounted on our 2018 GMC 2500hd. We use it to transport our bikes. We choose not to mount items on our tv rear bumper.
This front hitch carrier has been a life saver for us. I reviewed all the bike mounting options I could find for our truck camper and decided that mounting the bikes on a front receiver hitch was the way to go. The customer service at the front end was excellent. I needed to be sure that the position of the hitch receiver would allow a) enough ground clearance, b) that the bikes would not be touching the front grill of the truck, c) that the bikes would not be sitting up so high that the view of the driver would be obstructed and d) that I would actually be able to do the install myself. Well, the customer service gal on the phone was very helpful and took a lot of time to research and answer all my questions and I felt confident that I was getting the right item. I was able to install the receiver in less than 2 hours with the help of my neighbor. The instructions were clear and the install went fairly smoothly. The end result is an excellent product that is very strong and durable and holds our bike rack perfectly. We have logged over 5000 miles since installing it last spring and I could not be happier with how things have worked out!
Had the front hitch in use for about a year. No issues...supports a front "cooler" rack that I modified and added a bike roack to the front of that...it performs the way it should....easy install...great produt...happy all around
Hitch fit perfect on my truck and the video was on point for installation. I had the hitch installed in 45 minutes and it looks great.
James
10/6/2023
Product works as described, I use it for my winch and use with my fishing rack on the beach.
The product arrived packed poorly and deformed. When we requested an RMA we were told we were responsible for shipping costs. Zero stars. We repaired the defective item ourselves.
High quality hitch. Great install instructions. Not hard to install but you will need two people. May be possible with one person with truck on a lift.
It took me a little more than an hour to install the mount. It was a little tight but I used a come a long to pull it into alignment.
David
8/14/2023
Works great, fit well, easy to install, and allows me to place my ev-bikes in the front of the truck when traveling.
The Curt Front Mount Hitch is a great addition to any working man's truck. The fit is so tight that I had to bend the side frame tabs out a little bit to get it mounted. Once in place it mounted exactly as described.
Installed on a 2018 Chevy 3500HD (diesel)
Product arrived as scheduled in a shipping box that was damaged in transit. Upon inspection of the contents, it was determined everything was fine and all installation parts were securely attached to the hitch. It's understandable that a cardboard box with a 35 pound steel frame will get some damage in handling.
Installation: Absolutely watch the video online, it is extremely helpful! I jacked up the front of my truck about 6 inches and set jack stands in place on the jacking blocks behind front wheel wells. I also removed the plastic debris guard (4-15mm bolts) for easier access to the mounting points. I must say, the threaded pull wires are a wonderful addition that made the installation flawless! Take your time and follow the enclosed instructions (and video) and it should take you about 30-45 minutes. I am an average mechanic at best and this was a really easy install!
Be aware that adding the hitch up front will require you be careful with parking curbs, however I think the hitch is stout enough to insure it will destroy a concrete curb. Probably best to avoid testing that theory.
I test mounted a motorcycle carrier on the from of the truck and loaded up a KTM 690 Duke. (315 lbs) Virtually no sag in the front suspension and to bike should ride well with proper pads & tie-downs. Makes for an interesting hood ornament ;)
All in all, a great product and vendor. You can buy with confidence.
Tahoe K.
1/25/2020
Stout Hitch
Very easy front reciever install, I was able to do it by myself with a hydralic floor jack. And no bumper modifications needed
I really like the front hitch. I use it to haul kayaks when I'm towing my fifth wheel.
My only complaint is that it significantly decreases my front end clearance. I now tend to hit ground while going through dips.
Other than that, it's been great.
Overall quality looking hitch. The side-flanges were not wide enough to fit around my ‘16 Sierra 3500 frame which was extremely difficult to install, especially with the fish-wire. Had to use a floor jack to push the hitch into place and remove the skid plate and thankfully there was an access hole in the frame where the flange-bolt goes. Did not want to cut a hole behind the license plate so this was the only option and would buy again if needed but the flanges should be 1/16th to an 1/8 of an inch wider.
Ryan
5/25/2021
Had to remove, to low to the ground and kept hitting everything.
Came a day early now to install looks good can't wait to see how it fits
etrailer needs to package their hitches better... I have received 2 of them and both boxes they were shipped in were just about destroyed! They were full of holes and tape covering up holes! Please package them better!!
Jenny N.
3/22/2022
I will have our Customer Service team reach out to you.
I searched far and wide for a front hitch for my 2018 GMC 2500 HD Denali, most will not fit the Denali for some reason. This one did so with no trimming of the air dam, it's a perfect fit and only took about 45 minutes to install by myself. This will be the second truck I've owned with a front hitch and it seems like a necessity at this point, they're great for bicycle racks, winches, kayak racks, you name it!
Very well built, relatively easy to ins tall.
Shipping box was trashed, all attaching parts were very well protected and nothing was lost. Installation was exactly as the video explained with no issues. Haven't used it yet.
Snowsport PlowEtrailer.com does it right from start to finish. On top of having a great web site, the staff are the best.
Keeping in mind, I ordered this in December, about 5 days before our first big snow, here in Ohio. Within an hour of ordering my SnowSport HD plow, I was upgraded to special priority shipping, that was a nice surprise! The plow arrived in about two days, in three boxes, as I ordered the front hitch at the same time. I feel bad for my UPS carrier, these boxes were not for the faint of heart. The assembly went smoothly, the manufacturer uses high end parts and everything is well marked and the instructions are easy to follow. I estimate it took me two hours to get everything put together, with a coffee break in between. I am impressed with the construction, wow. Heavy duty is right!
We had four inches of snow yesterday. I opened the garage door and went to work, two pushes to clear the parking spots, and one easy push down the two hundred foot gravel driveway. Like butter.
I was done. It took less then 15 minutes. I put this blade on my 2003 rear wheel drive, not 4x4, Chevy Blazer. I backed into the garage and it looked like I had just put the blade on, this blade could last a long time. I love it. I cant wait until we get a foot or more of snow, my wife wants to plow next time. Plus I have cable chains comming from Etrailer, they should be here any day. Just in case my two wheel drive has tracktion problems in the deeper snow. Thanks a bunch, Etrailer!
We installed this on our 2011 Honda Ridgeline and a week later it snowed... And snowed.... And snowed.. 5 feet in 24 hours ( we live on the lake near Buffalo) and it's still snowing... This wasn't good, it was AWESOME! It was an easy install and assembly and worked absolutely perfect! We have a tough driveway and this kept it clear with no issues, no problems and we used it all day and night! When you spend that much on something you've never even seen before you can have reservations... It's worth every penny. It's solid ( more than we thought it would be) and does the job with ease. No .. It's good, but...... It's exactly as advertised and etrailer not only had the best price, the communication with my order was exceptional. Now... If only the town could send a plow down my street.....
The Curt hitch assembly arrived in excellent condition. As usual, George did a fantastic job of getting my order to me very promptly. The installation went perfectly and exactly as shown in the video on the etrailer.com website. The front hitch fit was perfect on my 2015 GMC Sierra.
D W.
9/13/2016
Ive driven thousands of miles with my bicycle rack attached to the Curt front receiver. The Curt front receiver has performed perfectly. The best thing is I didnt have to cut or alter my truck to install it.
I had a few hiccups while assembling (over tightening things early, I think) but once I got it together it’s been awesome. Clears easily and efficiently. Have used to clear as much as 14” of snow (that required pushing off to the side more often) but once you get used to the technique this thing is a lifesaver. I can clear a 300’ long driveway in 15 minutes or so for an average 4-5” snowfall.
We added this hitch to the front of our GMC Sierra 1 ton and carry 2 ruckus motorcycles with us camping. This is a 500 lb. load upfront and carries wonderfully. It does hang low under the front bumper, so you will hit the curb if you park straight in. It will also hit a steep driveway. A lift kit for the truck is a possible cure but we carry a large camper and would be top heavy. We would buy this product again in a heartbeat as it is well constructed and easy to install in minutes.
Tom D.
6/24/2020
Still love it, but rough roads are a no go without lifting our truck. There are many asphalt marks from Jasper to Yellowstone.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado 2500 Accessories
Christopher
4/21/2023
Great, except for the reduced front clearance as indicated in my review