bing tracking image

Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: K2AVAL8826ELT,C31071

Retail:$2,733.92
Our Price: $2,597.80
You Save: $136.12
Snow Plow

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me



Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall
part number: K2AVAL8826ELT

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.

Features:

  • Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
  • Electric actuator raises and lowers plow smoothly and consistently
    • Wireless remote control lets you operate plow from the warmth of your cab
    • Internal clutch prevents damage caused by overextension of actuator
    • Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
  • Strong rubber deflector on top of plow directs snow down and away from your windshield
  • Hardened steel edge breaks up packed snow and ice
  • Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
  • Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
    • Can extend life of the plow if you hit an obstruction
  • Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
    • Wheel height is adjustable to match your vehicle height
  • Plow handle with knob lets you easily move plow up and down during mounting
  • Safety chain holds plow in raised position during travel
  • Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
  • ISO certified
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver


Specs:

  • Application: 2" x 2" hitch receivers
    • Cannot be used with hitches or receiver adapters that have built-in drops
  • Blade dimensions: 88" wide x 26" tall
  • 3 Blade angles:
    • Left 45 degrees
    • Straight ahead
    • Right 45 degrees
  • Distance from center of hitch pin hole to the front edge of plow: 50"
  • Weight: 296 lbs
  • 1-Year limited warranty


Detail K2 Plow Length

The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.


Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


Detail K2 Hitch Mount

To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


Detail K2 Caster Wheel

The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.


How to Plow

Detail K2 Adjustable Plow Position

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Smooth, Controlled Lifting with Electric Actuator

Detail K2 Elite snow plow actuator

The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.


To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.


This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.


Detail K2 Features

Detail K2 Skid Shoes

The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.


Detail K2 Blade Stiffener

Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.


Detail K2 Trip Springs

Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.



AVAL8826ELT Detail K2 Elite Hitch Mount Snow Plow - 88" Wide x 26" Tall Blade



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31071

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in the USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31071 Curt Front-Mount Trailer Hitch Receiver

Item # C31071





Customer Reviews

Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall - K2AVAL8826ELT

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31071

Average Customer Rating:  4.8 out of 5 stars   (113 Customer Reviews)

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Christopher04/20/2022

The hitch was well-made, and installing it was very easy. However, the design of the hitch is somewhat perplexing. The hitch receiver hangs about 3 inches lower than it needs to, which reduces the ground clearance on the front of the truck significantly. See attached photos. The hitch will work until I find something better, That restores the front ground clearance

Christopher

4/21/2023

Great, except for the reduced front clearance as indicated in my review



by: Bob05/25/2022
2019 Chevrolet Silverado 3500

Well so far so good. It was a little difficult trying to do it by myself, got most of it done and then had to go to a autobody shop down the road to tighten up the 4 bolts.

Bob

5/26/2023

It worked out great! We traveled to Key West from New England with only a couple of problems. Watch out for dips in the road, curbstones, large tree roots.



by: Rodney12/14/2023
2005 Ford F-150

Love the plow.
Only downside is the outside
bottom corners have bent backwards while plowing. I will have to straighten and reinforce those areas. I plow six different driveways. I was using a 4whlr plow for these before and it would take me several hours to all day, with this plow its less than 4hrs including driving time and I have vehicle heat. I've had many people looking, commenting and asking about this hitch system. I recommend it and give them the etrailer site for information and purchasing advice. This system is very impressive. Thank you.



by: Scott 06/01/2023

Have not opened the box yet, but am hoping for a perfect fit. Excellent communication on my order and delivery status…5-Star rating on customer service

Scott

6/4/2024

Awesome! Works great and I just used the front hitch to put a boat away in very tight quarters.



by: Fernando Zapata11/29/2023

The hitch is mounted on our 2018 GMC 2500hd. We use it to transport our bikes. We choose not to mount items on our tv rear bumper.



by: John02/24/2019
2016 Chevrolet Silverado 2500

This front hitch carrier has been a life saver for us. I reviewed all the bike mounting options I could find for our truck camper and decided that mounting the bikes on a front receiver hitch was the way to go. The customer service at the front end was excellent. I needed to be sure that the position of the hitch receiver would allow a) enough ground clearance, b) that the bikes would not be touching the front grill of the truck, c) that the bikes would not be sitting up so high that the view of the driver would be obstructed and d) that I would actually be able to do the install myself. Well, the customer service gal on the phone was very helpful and took a lot of time to research and answer all my questions and I felt confident that I was getting the right item. I was able to install the receiver in less than 2 hours with the help of my neighbor. The instructions were clear and the install went fairly smoothly. The end result is an excellent product that is very strong and durable and holds our bike rack perfectly. We have logged over 5000 miles since installing it last spring and I could not be happier with how things have worked out!



by: Peter08/18/2018
2017 GMC Sierra 3500

Had the front hitch in use for about a year. No issues...supports a front "cooler" rack that I modified and added a bike roack to the front of that...it performs the way it should....easy install...great produt...happy all around



by: James 10/05/2022
2017 GMC Sierra 2500

Hitch fit perfect on my truck and the video was on point for installation. I had the hitch installed in 45 minutes and it looks great.

James

10/6/2023

Product works as described, I use it for my winch and use with my fishing rack on the beach.

Etrailer Expert

Mike L.

10/19/2023

@James Awesome, we're glad to hear that your # C31071 Curt hitch is doing the job for you!


by: Amanda06/21/2024

The product arrived packed poorly and deformed. When we requested an RMA we were told we were responsible for shipping costs. Zero stars. We repaired the defective item ourselves.



by: James10/23/2023

This plow does not stand up to much use. I used it for my long gravel driveway and I was dissapointed in the durability of the plow. The plow bent near the cutting edge and twisted when I accidentally bumped into a rock when turning around. This plow is for light use only and it does not back drag snow well since it is light and does not have any down pressure.



by: Craig03/07/2021

High quality hitch. Great install instructions. Not hard to install but you will need two people. May be possible with one person with truck on a lift.



by: David 08/13/2022

It took me a little more than an hour to install the mount. It was a little tight but I used a come a long to pull it into alignment.

David

8/14/2023

Works great, fit well, easy to install, and allows me to place my ev-bikes in the front of the truck when traveling.



by: Calvin P.01/02/2015
2015 Chevrolet Silverado 3500

The Curt Front Mount Hitch is a great addition to any working man's truck. The fit is so tight that I had to bend the side frame tabs out a little bit to get it mounted. Once in place it mounted exactly as described.



by: Tahoe Kevin01/24/2019
2018 Ford Transit Connect

Installed on a 2018 Chevy 3500HD (diesel)

Product
arrived as scheduled in a shipping box that was damaged in transit. Upon inspection of the contents, it was determined everything was fine and all installation parts were securely attached to the hitch. It's understandable that a cardboard box with a 35 pound steel frame will get some damage in handling.

Installation: Absolutely watch the video online, it is extremely helpful! I jacked up the front of my truck about 6 inches and set jack stands in place on the jacking blocks behind front wheel wells. I also removed the plastic debris guard (4-15mm bolts) for easier access to the mounting points. I must say, the threaded pull wires are a wonderful addition that made the installation flawless! Take your time and follow the enclosed instructions (and video) and it should take you about 30-45 minutes. I am an average mechanic at best and this was a really easy install!

Be aware that adding the hitch up front will require you be careful with parking curbs, however I think the hitch is stout enough to insure it will destroy a concrete curb. Probably best to avoid testing that theory.

I test mounted a motorcycle carrier on the from of the truck and loaded up a KTM 690 Duke. (315 lbs) Virtually no sag in the front suspension and to bike should ride well with proper pads & tie-downs. Makes for an interesting hood ornament ;)

All in all, a great product and vendor. You can buy with confidence.

Tahoe K.

1/25/2020

Stout Hitch



by: Ian09/19/2023
2018 Chevrolet Silverado 2500

Very easy front reciever install, I was able to do it by myself with a hydralic floor jack. And no bumper modifications needed



by: Tracy05/03/2018
2016 GMC Sierra 3500

I really like the front hitch. I use it to haul kayaks when I'm towing my fifth wheel.
My only complaint is that it significantly decreases my front end clearance. I now tend to hit ground while going through dips.
Other than that, it's been great.



by: Ryan 05/24/2020
2015 Ram 3500

Overall quality looking hitch. The side-flanges were not wide enough to fit around my ‘16 Sierra 3500 frame which was extremely difficult to install, especially with the fish-wire. Had to use a floor jack to push the hitch into place and remove the skid plate and thankfully there was an access hole in the frame where the flange-bolt goes. Did not want to cut a hole behind the license plate so this was the only option and would buy again if needed but the flanges should be 1/16th to an 1/8 of an inch wider.

Ryan

5/25/2021

Had to remove, to low to the ground and kept hitting everything.

Sierra K.

5/27/2021

Thank you for your review. On a 3500 Sierra the top of the receiver tube opening to level ground should be 9 3/ 4".


by: J. Michael05/01/2024
2015 GMC Sierra 3500

Came a day early now to install looks good can't wait to see how it fits



by: Chuck03/11/2022

etrailer needs to package their hitches better... I have received 2 of them and both boxes they were shipped in were just about destroyed! They were full of holes and tape covering up holes! Please package them better!!

Etrailer Expert

Jenny N.

3/22/2022

I will have our Customer Service team reach out to you.



by: Billy 01/04/2024

Easy to put together,easy to put it on and take it off my truck, works like it should



by: Dave T.01/02/2019
2018 Ram 2500

I searched far and wide for a front hitch for my 2018 GMC 2500 HD Denali, most will not fit the Denali for some reason. This one did so with no trimming of the air dam, it's a perfect fit and only took about 45 minutes to install by myself. This will be the second truck I've owned with a front hitch and it seems like a necessity at this point, they're great for bicycle racks, winches, kayak racks, you name it!



by: Bob S.12/01/2014
2015 Chevrolet Silverado 3500

Very well built, relatively easy to ins tall.



by: Steve 05/31/2023

Shipping box was trashed, all attaching parts were very well protected and nothing was lost. Installation was exactly as the video explained with no issues. Haven't used it yet.



by: D Scott W09/14/2015
2015 GMC Sierra

The Curt hitch assembly arrived in excellent condition. As usual, George did a fantastic job of getting my order to me very promptly. The installation went perfectly and exactly as shown in the video on the etrailer.com website. The front hitch fit was perfect on my 2015 GMC Sierra.

D W.

9/13/2016

Ive driven thousands of miles with my bicycle rack attached to the Curt front receiver. The Curt front receiver has performed perfectly. The best thing is I didnt have to cut or alter my truck to install it.



by: Tom D06/21/2019

We added this hitch to the front of our GMC Sierra 1 ton and carry 2 ruckus motorcycles with us camping. This is a 500 lb. load upfront and carries wonderfully. It does hang low under the front bumper, so you will hit the curb if you park straight in. It will also hit a steep driveway. A lift kit for the truck is a possible cure but we carry a large camper and would be top heavy. We would buy this product again in a heartbeat as it is well constructed and easy to install in minutes.

Tom D.

6/24/2020

Still love it, but rough roads are a no go without lifting our truck. There are many asphalt marks from Jasper to Yellowstone.


25
113
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Recommended Snowplow for 2 Front Trailer Hitch on One Ton Pickup
  • If you already have a front mount hitch then all you'll need is a snowplow which uses the hitch receiver for installation. The Detail K2 Elite Snowplow for 2" Hitches part # K2AVAL8826ELT for example is a great option with an 88" wide blade so it will be great for larger pickup like a 3/4 or 1 ton. It has a wireless remote so you can control the blade height from inside the cab on the fly and there are skid shoes so you can plow over uneven surfaces like gravel without damaging the blade. I
    view full answer...

  • Will the Detail K2 Snowplow # K2AVAL8826ELT Fit on My 2000 Ram 2500?
  • From your recent searches, I believe you are asking about the Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall # K2AVAL8826ELT. This snowplow is confirmed to fit your 2000 Ram 2500 4x4 as long as you do not have the Sport submodel. We unfortunately do not carry any snowplows that work with a Sport. If you need a compatible front hitch receiver for your truck, I recommend the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604. Not only does this hitch come
    view full answer...

  • Snow Plow Recommendation for 2010 Toyota Tundra with 2 inch Hitch
  • For your 2010 Toyota Tundra with a 2 inch front hitch we have great plow options like the Detail K2 part # K2AVAL8826ELT which can be raised and lowered from inside your cab with a remote setup but we do not have any options that allow you to remotely angle the plow blade from left to right. This plow is still adjustable in this way but you have to perform that adjustment manually.
    view full answer...

  • Would EcoHitch Front Hitch for 2013 Ram 1500 Work with Detail K2 Elite Plow
  • The Detail K2 Elite Snow Plow part # K2AVAL8826ELT that you referenced was designed to work with front hitches that install lower on the vehicle than your ecohitch. This would hold the plow much too high and would not work. You'd need a hitch like the Curt # C31015 which installs lower on your 2013 Ram 2500.
    view full answer...

  • Can I Use the Detail K2 Elite Snowplow on a 6-Inch Lift on a 1995 Chevy K3500?
  • I went ahead and reached out to the engineers at DK2, and they confirmed that with a 6-inch lift on your 1995 Chevy K3500, you will be able to use the Detail K2 Elite Snowplow for 2" Hitches # K2AVAL8826ELT only if you attach the Replacement Cross Member Plow Attachment for Detail K2 Snowplows # K2CRM3312.
    view full answer...

  • Recommended Snow Plow for a GMC Sierra 2500 w/ a Front Mounted Hitch
  • Since you already have a front mount hitch on your 2022 GMC Sierra 2500 then the Detail K2 Elite Snowplow item # K2AVAL8826ELT will work great for your truck. The Detail K2 Elite item # K2AVAL8826ELT weighs 296 lbs and requires a 2" x 2" receiver. Most front mounted hitches have a minimum capacity of 500 lbs so you are good to go. It has a wireless remote so you can control the blade height from inside the cab and there are skid shoes so you can plow over uneven surfaces like gravel
    view full answer...

  • What Front Hitch and Snow Plow Fits My 1997 Dodge Ram 2500?
  • Yes! The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604 is confirmed to fit your 1997 Dodge Ram 2500 4x4 with the Cummins engine. The hitch comes with all mounting hardware included. Also, you will be able to attach the Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall # K2AVAL8826ELT to that setup. If you need a hitch pin for the plow to attach to the hitch, I recommend the # C21504.
    view full answer...

  • Snowplow Recommendation for a 2009 Ford Explorer Sport Trac
  • Our plows have some adjustability, but they don't have a power angle - to adjust the angle you will need to do so manually. For your application I recommend checking out the Detail K2 Elite # K2AVAL8826ELT which installs on your 2009 Ford Explorer Sport Trac using the Curt Front Mount Hitch Receiver # 31545. I like this snowplow because it's 88" wide x 26" tall, it has 3 different angle positions (left, center, and right), and it uses a chain-lifting design that does a great job at
    view full answer...

  • How to Order Replacement Hardware for a Curt Front Mount Trailer Hitch
  • Hey Matt, to get replacement hardware for your Curt Front Mount Trailer Hitch Receiver # C31071 you're just going to need to need to order the Replacement Hardware Kit for Trailer Hitches # RHK and enter "C31071" in the hitch item number box.
    view full answer...

  • Will Curt Front Mount Receiver # C31071 Fit a 2015 GMC Sierra 2500 Denali
  • I spoke with my contact over at Curt and he said that front mount receiver # C31071 will fit your 2015 GMC Sierra 2500 Denali. The air dam may need to be trimmed for the hitch to fit. Since this hitch fits lower than the Draw-Tite model there won't be extensive trimming required, just the possibility of some trimming of the air dam.
    view full answer...

  • Will the Curt Front Mount Trailer Hitch Receiver # C31071 Fit a 2018 Chevrolet Silverado 2500HD
  • Yes, the Curt Front Mount Trailer Hitch Receiver # C31071 that you referenced is confirmed to fit your 2018 Chevrolet Silverado 2500HD. I have attached a sample installation video that you can reference.
    view full answer...

  • How to Haul Bikes On A 2017 GMC Sierra 2500 With Pull Behind Trailer
  • Yes, The Curt Front Mount Trailer Hitch Receiver part # C31071 is a direct fit for your 2017 GMC Sierra 2500 and absolutely, the front mount trailer hitch is completely safe as long as you are in accordance with the hitch and vehicle manufacturer's load and weight ratings. The vertical load rating for this hitch is 500 lbs. For a front mount hitch bike rack carrier I recommend the Swagman Original part # S64152-2. The Swagman Original is a heavy duty steel bike rack capable of carrying
    view full answer...

  • Recommended Front Mount Hitch That Requires No Modification On 2016 GMC Sierra 2500
  • The front mount trailer hitch I recommend for your 2016 Sierra is the Curt, part # C31071. When installing the hitch the one bolt for the tow hook is removed one loosened but then re-installed with the hitch. No trimming or drilling is required for this hitch on your truck.
    view full answer...

  • Will Curt Hitch # C31071 Fit 2016 GMC Sierra 2500 Denali
  • I spoke with my contact over at Curt and he said that front mount receiver # C31071 will fit your 2016 GMC Sierra 2500 Denali. The air dam may need to be trimmed for the hitch to fit.
    view full answer...

  • Does Curt Front Mount Hitch # C31071 Fit a 2015 Chevy Silverado 2500 HD
  • Yes, the Curt front mount receiver, part # C31071, does fit your 2015 Chevrolet Silverado 2500HD. We've actually installed it on a 2016 2500HD; I've linked the video for you.
    view full answer...

  • Ground Clearance of Curt Front Hitch Installed on 2018 Chevy Silverado 3500
  • When the Curt front hitch part # C31071 is installed on your 2018 Chevy Silverado 3500HD the ground clearance will be 7-7/8 inches.
    view full answer...

  • Is Trimming Required to Install a Front Hitch on a 2015 GMC Sierra Denali 2500
  • You didn't say what was confusing so to elaborate Curt, the manufacturer of front mount receiver # C31071, says that trimming of the front air dam may be required on the 2015 GMC Sierra 2500 Denali. The trimming will need to be around where the receiver will be so it fits properly. You could also just take the air dam off if you wanted to. It did not have to be trimmed on the 3500 in the video I have linked but that truck is not a Denali model. But if it were then that air dam could
    view full answer...

  • Front Mount Hitch Recommendation for 2015 GMC Sierra 2500
  • The Curt Front Mount Hitch Receiver, part # C31071, is confirmed as a fit for your 2015 GMC Sierra 2500. This hitch has a 2 inch receiver opening and is an easy, bolt-on installation. If you need to maneuver a trailer using your front hitch I recommend a ball mount like part # C45010. This ball mount has a 3/4 inch rise or a 2 inch drop. I have attached a link to a product review for this ball mount you can check out. If you need a hitch ball I recommend part # 63845 for the 2 inch
    view full answer...

  • Which Front Hitch Fits 2018 Chevy Silverado 3500
  • We have confirmation from Curt that the front hitch part # C31071 fits your 2018 Chevy Silverado 3500 and we've also had the chance to test fit this hitch on a 2018 model just like yours so we know it fits as well. See attached install video.
    view full answer...

  • Will Curt Front Mounted Hitch for 2015 GMC Sierra 3500 Crew Cab Work With Rhino-Rack Load Assist
  • You can absolutely use all the parts you mentioned for your 2015 GMC Sierra 3500 Crew Cab in order to carry your kayak. The front-mounted hitch and Rhino-Rack T-Load Hitch Mounted Load Assist will be the perfect option for you, and you can get the T-Load with and roof rack to ensure your kayak doesn't scratch up your roof. The exact parts you need for your '15 GMC Sierra 3500 Crew Cab are the following: - Curt Front Mount Trailer Hitch Receiver # C31071 - Rhino-Rack T-Load Hitch
    view full answer...

  • Front Mount Hitch for 2018 GMC Sierra 2500
  • There is a front mounted hitch that fits your 2018 GMC Sierra 2500, the Curt # C31071. It has a 2" receiver opening, a line pull rating of 9,000 lbs and a vertical load limit of 500 lbs. I've left a link to a video install of this hitch for you to take a look at.
    view full answer...

  • Front Hitch Mount Recommendation for a 2015 GMC Sierra 2500
  • Yes, the Curt Front Hitch part # C31071 that you referenced has been confirmed as a fit for your 2015 GMC 2500HD so it would work well for you.
    view full answer...

  • Front Mount Hitch Receiver for a 2015 GMC Sierra 2500 Denali
  • I spoke with my contact over at Curt and he said that front mount receiver # C31071 will fit your 2015 GMC Sierra 2500 Denali. The air dam may need to be trimmed for the hitch to fit. We haven't had anyone complain about the ground clearance but the receiver will be under the front fascia so it is possible that it could make contact with the ground at severe enough inclines. The Draw-Tite hitch, # 65068, will not fit because the receiver is mounted higher up on the cross member compared
    view full answer...

  • Will The Curt Front Hitch Work With A Brush Guard On A 2016 GMC Sierra 2500?
  • Hello Karla, thanks for reaching out. Generally, brush guards or grille guards will need to be removed in order to install a front hitch. There is a possibility that they could work together though. I suggest you take a look at the instructions for the Curt # C31071 front hitch which I have linked below. As you can see the hitch bolts on using the existing tow hook bolts on the bottom of the frame rail. The other bolt goes to the outside of the frame rail on both sides. I suggest you compare
    view full answer...

  • Curt Front Hitch for a 2016 Chevy Silverado 2500HD
  • For your 2016 Chevy Silverado 2500HD we have the Curt front hitch part # C31071 that is a confirmed fit. I attached an install video for you to check out as well.
    view full answer...

  • Will the Curt Front Hitch Receiver Fit with a Ranch Hand Legend Grill Guard?
  • Both the Ranch Hand Legend Grille Guard and the Curt Front Mount Trailer Hitch Receiver item # C31071 use the same method of install but different attachment points on the front end of the frame. There is one common bolt hole on either side that they use which may require you purchasing a longer bolt. These 2 components are not confirmed to fit together but the Curt front hitch receiver mounts on the bottom side rear of the frame and the Ranch Hand Grille Guard mounts inside next to the
    view full answer...

  • Alternate Installation Method for Installing Curt Hitch # C31071 on 2015 Silverado 3500
  • Thanks for letting us know how the install of the Curt Hitch part # C31071 went on your 2015 Chevy Silverado 3500. Sometimes hitches can get slightly bent in shipping which can cause the clearances to be tighter than intended. I am not 100% that is what happened in your situation but it is possible. Either way I am glad you got it figured out and installed. As long as you get all of the bolts installed and torqued to the specs in the installation instructions the way you get everything
    view full answer...

  • 2015 Silverado 2500HD Winch Wiring Kits for Front and Rear of Truck
  • We can help you with the wiring kits for the winch as we carry them but we do not carry a dual battery kit setup for your truck. I found several online when searching for them just now. For a rear wiring kit that uses 1 gauge wire we have the part # BDW20348, and then for the front part # BDW20347. This heavy of gauge wire would be ideal for a 12k winch like you have as well. For a 12,500 lb capacity Bulldog Winch Alpha we have the part # BDW10028 which would be a great option. This
    view full answer...

Info for these parts were:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Chevrolet Silverado 2500 Accessories