Part Numbers: TLC2204,TLR3504
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (3254 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.The Superhitch is an amazing product. Had a couple now. Expensive but you get what you pay for. Purchasing from E-trailer is very easy and they delivered the product quickly.
Another well engineered product well suited for the application and supported by knowledgeable staff at etrailer.
Great product for rear camper mounts. Easy bolt-on addition to Torklift hitch.
I just had a chance to put on quite a few miles in various conditions in these things perform flawlessly. I had some trouble with the installation as one of my frame bolts nut came loose so I had to drill another hole next to it and put a backer plant in the box but it turned out to work just fine doing that.
Magnum 30K & Camper Tiedowns TLF2022 & TLR3504
Install ok never a problem
KATE WAS A TOTAL JOY TO WORK WITH.
The TorkLift tie downs were relatively easy to install. They look great. They are designed well. It will give us peace of mind having them on our truck with our new big camper. We have not gone out camping yet to try them out, but expect good performance from them. Thanks to etrailer for helping us get them.
Installed front hitch in front and rear tie-downs.
Solid as a rock and easy to install
Arrived earlier than expected. Kudos to Arthur D for all of his assistance!
Extremely nice. Well packaged delivered fast great communication. The parts went on the truck easier than expected and very well engineered.
Absolutely amazing!!! Love all the products I've purchased from etrailer.
As always.... Customer service is more than 5 star if I could give it.
Quinn was great to deal with and took care of my order.
Once again the direction were not helpful at all. Found a [online] video that helped the most. Passenger side install was a breeze... the drivers was not!!! It's on but due to the fuel tank and guard on my 05 Sierra 3500 being so close to the frame I was not able to reach the flange nuts with my torque wrench. Due to the lack of space between the nuts and the fuel tank I had to rely on tightening them with an open end wrench. (Not ideal) To make matters more interesting I had to place a block of wood behind the flange in order to get the flange to stay in position and get the tie down on to the flange nuts. IMO Forklift engineers should develop a front tie down that is better suited to 2001-2007 GMC 3500 trucks. And non engineers should create the directions!!! It's 2021 - creating an install videos for their products should be a given.
Great product. Was easy to install. It has
Worked great. The camper came with fast gun tie down system. I would recommend using these also
The Torklift tie downs for my 2003 Chevrolet Silverado are as advertised. A quality product. I installed them without any issues. The instructions are straight forward and provide pictures for those who need visual assistance. Very happy with these tie downs.
These tie-down supports are sturdy. Istallation was a bit of a challenge and required holes to be drilled to bolt the upper and lower pieces together, because where they matched up there wasn't a hole. I'm not sure if this was missed or done intentionally to allow for proper alignment first. These were advertised as "no drilling required" but that was not the case. Luckly I am somewhat mechanically inclined. If not, I advise a professional does the install.
Simple install with the torque lift heavy duty high box reciever
I believe this review is for the rear tie-downs. I like this Torklift tie-down system a lot, works well even for my heavy Artic Fox camper. This one fits right into the current hitches Torklift is selling which are also quite useful. The instructions are easy to follow and the videos are helpful. Get the FastGuns as well, you'll appreciate them after just one use, and more every time you use them.
vary easy to install. Was shorted 2 metric locking nuts was only issue.
Work good but rust, fade, chip and look bad very quickly. I take care of my vehicle and wash often but they look bad quickly.
Heather A.
4/21/2022
These are powder coated to resist rust but it is still a good idea to periodically spray them with fresh water if they are exposed to salt water or salt on the roads. I do recommend to lightly sand any surface rust off and cover those areas with a rust prevention spray paint.
Wow what a difference compared to the competition that I’ve used before. The camper isn’t going anywhere with these tie downs!
They do what I want them to
Works well with super hitch
Excellent rear camper tie downs! Super easy to install! Shipping was good as I paid for the 3 day delivery.
Ask the Experts about this Truck Camper Tie Downs
Do you have a question about this Truck Camper Tie Downs?
TorkLift Accessories
Fit to this rack on your 2008 Chevrolet Silverado
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado Accessories
Don
1/27/2024
Love Torklift equipment. Expensive but worth it. Wouldnt buy anything else.