Videos
for Tool Organizer
Help Articles
for Tool Organizer
Expert Answers
for Tool Organizer
Both the LED Trailer Mini Clearance #MCL10AKB and Uni-Lite LED Clearance #MCL11RKB will require an 11/16" hole for mounting. These both use the same Grommet #A11GB.
view full answer...Erickson has the spacing for the mounting holes of the #EM09160 before and after the chock at approximately 4-3/8" center to center. Since they unfortunately do not offer a custom backing plate the #e96RR you purchased is going to be…
view full answer...Yes you can upgrade the 5 inch monitor of your Furrion Vision S system with a 7 inch one with the part #FR47FR and you'd be set.
view full answer...Yes, you can upgrade the 4.3 inch monitor of your Furrion setup to the 7 inch #FR47FR or the #FR97FR for the 5 inch. This will work great and give you an easy to view monitor.
view full answer...To add two side cameras to your Furrion Vision S Wireless RV Backup Camera System with 5" Screen #FOS05TASF, you can use the Marker Light RV Side Cameras #FCE48TASL. I can understand your concern with the trailer having all LED lights,…
view full answer...The Replacement 7 inch monitor you'd looked at, part #FR47FR (which is Furrion's part #FOS07TAPK-008 is indeed a correct replacement for your original monitor. According to Furrion, it will be compatible with your existing…
view full answer...You can upgrade your monitor to the 7 inch version with part #FR47FR. Your power cable can be reused but you'll need a new mount #FR79SR.
view full answer...Yes, you can use the camera from your 4.3" monitor with the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System part #FR47FR, just go through the pairing process and you're good to go.
view full answer...I went to our warehouse to measure the Draw-Tite Ball Mount #2753 for the dimension you asked for. Please refer to the linked photo I prepared for you.
view full answer...I have a great mud flaps solution for you. Unfortunately, the only set of WeatherTech Mud Flaps that fit your 2022 Ram 3500 dually #WT110108 are only confirmed to fit the front fenders on vehicles without fender flares. If front flaps are what you…
view full answer...The female thread for the Adapter Fitting #3057089 is 3/8-24 while the male thread is M10-1 (also known as 3/16 inverted flare to M4.76 bubble flare). When I reached out to my contact at Dexter Axle he said that they use this on their 6K - 8K four…
view full answer...The Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K #AKUBRK-35-D will fit the traditional 3/16 inch brake lines like #18SI-BLKIT or #20TA-BLKIT which have the thread size of 3/8"-24.…
view full answer...