Product Specs:
Boat Trailer Parts
Winch Stand
Roller Bracket
Galvanized Steel
13-3/16 Inch Tall
CE Smith
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.
Video of CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
Average Customer Rating: 4.7 out of 5 stars (212 Customer Reviews)
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.Sturdy and easy install. Perfect replacement for my bent bracket
Bracket is what I thought it would be. Very well made and easy to mount.
Work prefect, the size is great for crank handle,and is strong
Great for PWCs and fishing boats but probably a bit lightweight for larger boats. Works well on my Sea Doo trailer. I was going to make my own, but for what I could buy the material for, I was able to buy two of these. Bottom line, I'd buy these again for what I'm using them for.
I have a very small bow stop on a 22' ocean going cruiser I just purchased and needed a more substantial bow stop, I found just what I needed and I am very pleased with the results.
This is the first time to refurbish a boat trailer. Your website was very easy to search. I found exactly what I was looking for, ordered it, and I think two days later I had received it. And it worked on my trailer like I thought it would. It does not get any better than that.
This is a terrible product. Cheaply made and too narrow to fit over any normal winch. Too late to return, so going in the trash.
Good quality and durable
Worked perfect with new winch I purchas ed
This piece was exactly what I needed to replace my old worn out piece. Great quality!
Exactly what I needed
It fit my trailer perfectly. Now my boat sits 6 inches back further on the trailer so that my transducers do not get damaged.
Thank you - Doug R.
Exactly what I was expecting. It arrived 2 days early as well.
Perfect, just what we needed. Easily installed and super fast shipping! Thanks!
High quality and exactly what we were looking for.
This bracket worked out perfectly for my installation. I mounted it below the winch for two reasons: it is too narrow for the winch I already had, and the bow stop needed to be positioned below the winch attachment point on the boat (the front boat handle).
Kenneth
1/26/2018
All working well, thanks.
I bought this bow roller mounting bracket to replace an older bracket that did not fit my new set-up. The new bracket fits perfectly. It was delivered well ahead of the projected delivery date.
Bill G.
2/17/2019
The bracket seems to be working fine. No problems
A good quality item arrived in timely fashion and is doing exactly what it is supposed to, supporting the bow of my boat from the winch post
Geoffrey
6/27/2022
Awesome 100
Whish ce smith would have made it a little bit more durable. I bought thus one so I had a spare because it gets bent fairly easy
I have a 35+ plus year old shorelander boat trailer. I had recently purchased a 12 foot tracker flat bottom Jon boat. The problem I had was trying to fit my new tracker flat front boat to my old bow stop. My old bow stop is V shaped. I found a bow stop from etrailer for flat front Jon boats but it did not fit the bracket on my old trailer. I did a little research on this site and found the perfect solution. The solution was a wider mounting bracket to hold the new bow stop. The bow stop is a Yates 3 inch wide. My old bow stop was a Yates 2 inch V. The bracket is very universal for older trailers. etrailer is the only company I could find that offered this product. The prices are great and the shipping is good. I have also purchased new axle mounting plates and leaf spring bushings from here for the same trailer and they fit like a glove. The axle mounting plates and bushings are made by the same people as the bow stop bracket which is CE Smith. Thank you etrailer! I will be a continued customer!
My trailer came without a bow roller. The parts I ordered were just what I needed to add that to my trailer. Fast delivery and good price. Web site was good also.
Patrick L.
3/18/2020
Great
had to replace rusted bunk brackets...these fit perfectly...the u bolts were a tad wider in width and bigger than the holes on the trailer so had to modify the holes to accomodate the u bolts...everything worked fine albeit took a little more time
Very sturdy piece. Easy to install, much better bow stop than what I had before. Thanks guys!
Michael M.
6/27/2014
Yes that piece works great! Thanks for checking.
Customers compare CE31005PG to these similar products
VS
Product Specs:
Boat Trailer Parts
Guards and Pads
Bow Stop
Fits 1/2 Inch Shaft
3 Inch Long
Black Rubber
2-7/8 Inch Wide
Yates Rubber
Replace the worn-out bow stop on your boat trailer with this heavy-duty rubber one. Stop acts as a bumper to keep your boat from hitting your trailer winch when loading. Designed for use with johnboats.
Video of Yates Flat Bow Stop for Boat Trailers - Heavy-Duty Rubber - 5-3/8" Span - 1/2" Shaft
Average Customer Rating: 4.8 out of 5 stars (307 Customer Reviews)
Replace the worn-out bow stop on your boat trailer with this heavy-duty rubber one. Stop acts as a bumper to keep your boat from hitting your trailer winch when loading. Designed for use with johnboats.I recall seeing a request for customer photos somewhere. I know this is not exactly a correct set-up, but it's what my budget allowed. Anyway, on my 1st trip with this boat, the V shaped roller that came with the trailer (bought used last year) basically rubbed the boat raw, partly because the trailer isnt exactly straight. I had thought of the wood block first, so I may end up just putting a towel between the stop block and the boat. Sorry, I lost some of the "before" pics.
The empty trailer has the old roller, but to explain, I raised the bunks and made them flat, then bolted 2" x 8" & 2" x 6" redwood slats across. It fits like they were made for each other.
But good product, timely shipping, price was competitive.
I installed it in place of a V type roller, because the boat is a flat bow Jon Boat.
It was a perfect fit & it spreads the load across a wider area to minimize stress on the hull.
The rubber is kinda hard , so I’ll add a stick on pad where it contacts the hull.
Thank you.
Bob
Fits great works great. Should be used for every Jon boat trailer.
Works perfect on our Carolina Skiff. The trailer always had rollers which break down since the skid has a flat front. This works great.
Exactly what I needed! Fast shipping!! You guys are awesome!!!
John
4/30/2024
Still doing its job!! Wish I found it sooner!!
Smooth sailing! Order was handled and delivered promptly.
Works perfect with my square nose Aluma craft.
Alan
4/8/2024
Excellent! Very satisfied with the product. Highly recommend!
Works perfect for my jon boat!
Delivery was awesome; ordered and arrived two days later. Since my 16' aluminum Starcraft has a "flattened" upper bow from where a previous owner tightened the winch with stop against hull prior to pulling boat/trailer out of deep launch; this "jonblock" with flat surface was just what I needed. thanks.
John L.
11/15/2014
As a follow up, the rubber jonblock on front of boat trailer continues to work just fine a year after purchase. Totally satisfied with this replacement of original trailer boat stop pad.
Fast shipping and even faster installation. This took about 3 minutes to install and it fits perfectly. Here are some before and after pictures. I can't tell when I post this whether the before picture is first or second. Buy with confidence.
Dave
5/11/2018
Still working great. The old hard bumper was dinging up my jon boat, but the rubber one from etrailer works great.
Perfect,the only one I could find that will work on my joh boat thanks
Product was shipped quickly and arrived as expected. Easy to install.
Works as advertised. Well built and does the trick.
Great product at a great price. My problem was, with the roller on the front of my trailer and all the weight of the motor, trolling motor, and battery on the back of my boat, when I would travel down the road and hit bumps the front of my boat would jump up on top of the roller and then the winch strap would be loose and allow the front of my boat to slide back and forth. It fit very well where the original 3" roller was and even though I haven't tried traveling with the block in place, at least I can pull up on the front of my boat without it jumping over the block. I expect it will work exactly like I want it to.
A must have for jon boat trailers. I purchased a new trailer and it came with a v-hull roller. My boat was getting wear marks from the tiny bit of surface space actually touching the bow. No matter how tight the winch was, the bow would still move side to side going down the road. This was taking the paint off and creating shiny spots. Thanks to this proper jon boat bow stop, my boat is secure for travel with no more bow wear.
Product was as expected and delivered on time!
Continental JB1612 Trailer and a Tracker 1542 Jon Boat. I have no idea why these don't come as standard. etrailer had far and away the best deal. Most places wanted some ridiculous price and/or an exorbitant shipping fee. Why I keep coming back to etrailer. Less than five minutes to switch out.
Great fit for my jon boat. Trailer had been fitted with a roller bow stop, which did not fit the jon boat whatsoever. The jon block fit perfectly on the trailer and mated up flush and secure with the boat.
Quick receive on this item. It bolted right on and is an improvement for a flat front Jon boat.
I live on a river and have to speed onto the trailer and needed this bumper to spread the impact area on the bow. Not that it hits that hard, but you never know.
5 stars all the way. I just installed my bow stop today on my boat trailer and it is awesome. Everyone that has a flat bottom boat on a trailer needs one of these. Thanks etrailer just what I needed. I am sending before and after pictures, so you can see how great it works. Thanks again
Just what I needed fast shipping g
Works great with my boat
Wish they had more than one size but it works
Was perfect for my jon boat. Had to make a new winch-stand w/ bow stop and it holds the bow perfect. And for around $15 +shipping it was the best price I found.
Chad P.
8/7/2018
Still working great after a year! Theres no rust or deflection in the bracket. Sure was a lot easier than making my own!