CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
Product Specs:
Boat Trailer Parts
Winch Stand
Roller Bracket
Galvanized Steel
13-3/16 Inch Tall
CE Smith
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.
Video of CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Too difficult to install
Customer Reviews
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On - CE31005PG
Average Customer Rating: 4.7 out of 5 stars (214 Customer Reviews)
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.by: Kevin02/08/2024
Sturdy and easy install. Perfect replacement for my bent bracket
by: Paul H03/23/2024
Bracket is what I thought it would be. Very well made and easy to mount.
by: Wabes 105/01/2023
Work prefect, the size is great for crank handle,and is strong
by: Chad P08/07/2017
Great for PWCs and fishing boats but probably a bit lightweight for larger boats. Works well on my Sea Doo trailer. I was going to make my own, but for what I could buy the material for, I was able to buy two of these. Bottom line, I'd buy these again for what I'm using them for.
by: Kevin 05/13/2024
Perfect piece and customer service was great!
by: Roger F.07/26/2013
I have a very small bow stop on a 22' ocean going cruiser I just purchased and needed a more substantial bow stop, I found just what I needed and I am very pleased with the results.
by: Gary 09/15/2023
This is the first time to refurbish a boat trailer. Your website was very easy to search. I found exactly what I was looking for, ordered it, and I think two days later I had received it. And it worked on my trailer like I thought it would. It does not get any better than that.
by: 03/23/2024
This is a terrible product. Cheaply made and too narrow to fit over any normal winch. Too late to return, so going in the trash.
by: Kyle03/22/2024
Good quality and durable
by: Todd 03/13/2024
Worked perfect with new winch I purchas ed
by: Tony 01/09/2024
This piece was exactly what I needed to replace my old worn out piece. Great quality!
by: Paul 02/10/2024
Exactly what I needed
by: Mike 02/25/2024
Exactly what I was expecting. It arrived 2 days early as well.
by: Doug R.06/26/2023
It fit my trailer perfectly. Now my boat sits 6 inches back further on the trailer so that my transducers do not get damaged.
Thank you - Doug R.
by: Tracy07/27/2018
Perfect, just what we needed. Easily installed and super fast shipping! Thanks!
by: Kenneth05/27/2016
This bracket worked out perfectly for my installation. I mounted it below the winch for two reasons: it is too narrow for the winch I already had, and the bow stop needed to be positioned below the winch attachment point on the boat (the front boat handle).
Kenneth
1/26/2018
All working well, thanks.
by: Parts Dept09/29/2023
High quality and exactly what we were looking for.
by: Mike B09/25/2017
I have a 35+ plus year old shorelander boat trailer. I had recently purchased a 12 foot tracker flat bottom Jon boat. The problem I had was trying to fit my new tracker flat front boat to my old bow stop. My old bow stop is V shaped. I found a bow stop from etrailer for flat front Jon boats but it did not fit the bracket on my old trailer. I did a little research on this site and found the perfect solution. The solution was a wider mounting bracket to hold the new bow stop. The bow stop is a Yates 3 inch wide. My old bow stop was a Yates 2 inch V. The bracket is very universal for older trailers. etrailer is the only company I could find that offered this product. The prices are great and the shipping is good. I have also purchased new axle mounting plates and leaf spring bushings from here for the same trailer and they fit like a glove. The axle mounting plates and bushings are made by the same people as the bow stop bracket which is CE Smith. Thank you etrailer! I will be a continued customer!
by: William02/16/2018
I bought this bow roller mounting bracket to replace an older bracket that did not fit my new set-up. The new bracket fits perfectly. It was delivered well ahead of the projected delivery date.
Bill G.
2/17/2019
The bracket seems to be working fine. No problems
by: Geoffrey 06/18/2021
A good quality item arrived in timely fashion and is doing exactly what it is supposed to, supporting the bow of my boat from the winch post
Geoffrey
6/27/2022
Awesome 100
by: Patrick L03/17/2019
My trailer came without a bow roller. The parts I ordered were just what I needed to add that to my trailer. Fast delivery and good price. Web site was good also.
Patrick L.
3/18/2020
Great
by: Ariel08/04/2022
had to replace rusted bunk brackets...these fit perfectly...the u bolts were a tad wider in width and bigger than the holes on the trailer so had to modify the holes to accomodate the u bolts...everything worked fine albeit took a little more time
by: Michael M05/31/2013
Very sturdy piece. Easy to install, much better bow stop than what I had before. Thanks guys!
Michael M.
6/27/2014
Yes that piece works great! Thanks for checking.
25
214
Show More Reviews
Do you have a question about this Boat Trailer Part?
VS
CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
Product Specs:
Boat Trailer Parts
Winch Stand
30 Inch Tall
2 Inch Wide
CE Smith
This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel.
Video of CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide - CE31013G
Average Customer Rating: 4.9 out of 5 stars (62 Customer Reviews)
This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel.by: Bob 03/29/2024
This device fit perfectly on my Malone kayak trailer which I am converting to accommodate my float boat. It installed easily with (4) 3/8 bolts
by: Barry10/28/2021
PERFECT. This was exactly what I was looking for and didn't know if it existed. My Kayak Trailer is a bit smaller than regular boat trailers,this extension for my winch means I can Fish for a bit longer without throwing my back out moving my BONAFIDE SS127 around. Thanks for being Forward thinking and helping us in making Kayak Fishing The New Thing. Thanks guys, I will send some pictures of the modification.
by: Michael06/02/2019
I haul my whitewater raft (it is a cataraft) on my utility trailer and I needed a winch mount that was strong and gave me some elevation above the trailer tongue. This was the perfect solution. It only took me a few minutes to mount with four 3 inch by 3/8" bolts (not included). This winch mount was inexpensive, simple, feels really solid and seems to be working perfectly. eTrailer is always great to do business with.
by: Patrick 12/03/2023
Quality parts at competitive prices.
by: Patrick 06/08/2021
This is very sturdy. I put a winch on it to pull a small aluminum boat onto a trailer and have no problems. It does exactly what it is supposed to do. I would buy again but doubt I will have to.
Patrick
6/9/2022
Part looks and works like the day I installed it. Exactly what I needed.
by: Andrew 10/08/2023
Fairly priced Timely Delivery
by: Mark 06/27/2023
Works great.
Easy to install.
Just what I needed!
by: Kenneth05/27/2016
This winch stand was perfect for my needs. I had tried fabricating one before I found etrailer.com. Sure makes the job easier when you have the right parts.
Kenneth
1/26/2018
All working well, thanks.
by: Jeff 09/25/2022
Needed this for a small trailer. Perfect ! Existing holes almost did the whole job. I only had to drill two new holes.
by: Roger B. 10/30/2015
This is the third or fourth order I have placed with e-trailer, and each time they have packaged the items correctly and they have been recieved in the suggested amount of time, with no damage or loss; exactly what I ordered. i would highly recommend this company. Roger B.
by: Steve T10/26/2019
Part worked as it should. Was a bit tall for my application, but not a serious problem.
by: James10/27/2017
Customer had an accident and damaged trailer. Winch stand, bow roller mount and rubber bow wedge were all as described fit great and my order was filled and shipped quickly. Very pleased with products and service.
by: Martin D.01/23/2014
Seems to be a durable products ( CE31013G) and (CE31005PG) but no installation tips instructions included. No hardware. Should provide hardware size/type information.
by: lee09/03/2013
Product was on backorder. Waited more than three weeks. It was worth it. It was durable, well made except it missed one hole on one side and I have to drill a hole so the bolt can go through from one side to the other.
by: Dave L01/19/2016
This product arrived on time and is just what I need to repair my broken snowmobile trailer. Great communication from George about the timing of shipping.
by: Jay08/20/2018
As always, and easy, pleasurable shopping experience with etrailer! Not only do they ship out quickly and send you exactly what you ordered, but their customer service and follow up is unmatched!
by: Donald J05/02/2020
Solved a space problem with winch post that came on trailer.
by: Kathryn 09/15/2021
Very good quality. Fits my trailer perfectly. Everything the website said that it was. Delivered three days BEFORE the delivery date!!
by: neil07/04/2015
Works great for mounting on a raft trailer. Well built will need to finish so it doesn't rust, but otherwise does what it is supposed to.
by: Aaron 05/05/2021
Works great... would be nice to get with hardware to attach it but a great product
by: Justin09/02/2015
Much heavier and more stout than expected. Should be able to withstand the hardest hits when driving the boat on the trailer.
by: James04/16/2018
This company has the best pricing online and everything u need for a trailer. Will do business in the future. Thanks etrailers.
by: Heath03/05/2018
Everything looks good so far just opened the boxes.
by: Zan08/15/2018
Everything was spotted as promised. The product fit the trailer I am building. Very happy with the product and the purchasing process
by: Conley12/13/2019
The winch stand worked perfect for my trailer that I was setting up for my hobie pa.
25
62
Show More ReviewsCustomers compare CE31013G to these similar products
Ask the Experts about this CE Smith Boat Trailer Parts
Do you have a question about this Boat Trailer Parts?
- What Can be Used to Raise Winch on Boat Trailer
- Hey Jason,
The only thing I can think of that may work for you, depending on what you have now, is the CE Smith Winch Stand # CE31013G.
The stand mounts on a 2" wide trailer tongue and while it is 30" tall it can be mounted at different angles for different heights.
view full answer...
Chad P.
8/7/2018
Still working great after a year! Theres no rust or deflection in the bracket. Sure was a lot easier than making my own!