For a more economical option we have the Brophy camper tie downs, but they are not frame mounted. They are bed mounted.
The Brophy Camper Tie Downs, part # TDSF, are a universal application for full-size trucks and they will fit your Ram 1500. The hardware to mount the tie downs to the vehicle are included. These tie downs will fit campers up to 8 feet in length.
If you have a larger camper I would recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down.... view full answer...
If you are just looking to replace just the front camper tie down anchor plates on your 2012 Dodge Ram 3500 Dually with the 8' bed, step or board and factory hitch you need Replacement Front Anchor Plates for HappiJac Custom Truck Bed Camper Tie-Down System - Qty 2 Item # LC182872
If you are looking to replace the complete front tie down you need HappiJac Custom Tie-Downs for Truck Bed Camper Item # LC236326-205221 view full answer...
We unfortunately do not currently offer replacement hardware for TorkLift camper tie-downs so you'll have to reach out to TorkLift directly to get some replacements. If you haven't already purchased your turnbuckles to secure the camper to the tie-downs then I recommend also picking up the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020 to complete your setup. view full answer...
TorkLift doesn't offer their tie downs in singles so you'd actually have to purchase both and just replace the one with TorkLift Talon Camper Tie-Downs # TLF3001. view full answer...
We do carry the Replacement HappiJac Rear Tie-Down # LC182866 for the HappiJac Camper Tie-Downs # LC182910-182971 which fits your 2015 Ford F-250. We also carry the Replacement Anchor Plates # LC182876 and Stabilizer Bar # LC182971 depending on what mounting point you need. view full answer...
The boards/steps that are mentioned in the fitguide for the Torklift camper tie downs refers to the steps you sometimes see under truck cabs to make getting in and out of the truck a bit easier. Some call them nerf bars, side steps, tube steps etc.
Let's say you got an 8 foot bed 2021 Chevy Silverado 3500 with side steps, and a factory hitch. You'd want the part # TL44FR and # TL84FR.
If you had a different configuration let me know or follow the link I attached on this page where you... view full answer...
Yes, for a 2003 Chevy Silverado with a Happi-Jac tie-down system you'd need the Replacement Front Anchor Plates for HappiJac Truck-Mounted Camper Tie-Downs # LC182872. view full answer...
TorkLift only offers their tie-downs as complete kits so that's what we'll need to stick with.
There are a a few options depending on the size of bed you have on your 2022 GMC Sierra 2500:
- 6-3/4' Bed Front # TLC2225 and Rear # TLC3221
- 8' Bed Front # TL44FR and Rear # TLC3221 view full answer...
The front replacement anchor plates for you 1997 Dodge Ram 2500 or 3500 Dually are the Replacement Front Anchor Plates for HappiJac Truck-Mounted Camper Tie-Downs part # LC182876 view full answer...
Yes, the Replacement Front Anchor Plates for HappiJac Custom Truck Bed Camper Tie-Down System # LC182876 is the correct part for your 2001 Ford F-250 as this part fits the # LC182910 which is the correct front tie down for your truck. view full answer...
If you are looking for the Brophy part number of 2007, then you are wanting our Replacement T-Bolt for Brophy Camper Tie-Downs, # BR2007. These are 6" in length, quantity of 4 with order.
Please follow the link to product page, add to cart and checkout. view full answer...
Neither etrailer, nor TorkLift, has a packaged bolt kit specifically for the # TLF2021 tie-downs, but if you contact TorkLift directly they will let you know if they can assemble that for you and the cost.
Another option is to take the parts list to your hardware store. I have sent you a separate email with the parts list. It is important to get parts with the same or better grade. view full answer...
We do have a solution for your needed parts however, I inquired about individual parts purchase for the TorkLift Custom Frame-Mounted Camper Tie-Downs # TL54FR & # TLC2224 and these are only sold in kit form. So while we can supply you what you need, there will be spare parts. view full answer...
The o-rings part of the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020 are not available individually, unfortunately.
I recommend taking one of the o-rings needed for your turnbuckles to your local hardware store and find a match there.
Or,
You could replace the entire turnbuckle with something like the:
-Replacement Rear Turnbuckle for HappiJac Qwik-Load Turnbuckle Set # LC182896, which will include the o-ring you need, and replace a turnbuckle. This... view full answer...
In order to install the Replacement Tie-Down Cleat part # TA01-27046 you are going to want to use a 1/4"-20 x 1-3/4" socket head cap screw. We do not carry this screw separately so you would need to source it from your local hardware store.
With that being said this cleat was only used on the Thule TracRac UtilityRac Sliding Ladder Rack, Thule TracRac SR Sliding Truck Bed Ladder Rack, and the Thule TracRac G2 Truck Bed Ladder Racks. It will not work on a Thule TracRac TracONE Truck Bed... view full answer...
I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs # TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing gear help stabilize the steps on un-even ground and they'll work for entry heights between 31" and 42" tall. These aluminum steps are light weight and easy to move up and down, as well as remove during travel, so they're perfect for truck campers.... view full answer...
My contact at Torklift confirmed with me that you can use any 1/4 inch snapper pin to replace the one that was included in the hardware kit.
The Curt Coupler Safety Pin, # K-8P, is a 1/4 inch pin that has a usable length of 2-3/16 inches. If you have the other pin try, then try to match using that length. view full answer...
In order to replace your exterior ladder, even if you already have the stand-offs pegs and brackets, you will want to order a new ladder kit. We do not offer just the ladder without the mounting hardware.
A great ladder option for your Lance truck bed camper is the Stromberg Carlson RV Exterior Ladder # LA-401. This ladder measures 99-1/2 inches tall, but can be cut to the custom length you need for your camper.
I have attached a review video of this ladder and will send the instructions... view full answer...
We do not sell the knobs individually, but we do sell the replacement Load Stop Assembly # EM57705 for the Erickson Aluminum Truck Bed Ladder Rack # EM07705. I've always found it useful to have another load stop/tie down on the ladder rack so this isn't a bad idea to get. view full answer...
The ProGrip Top-Loader Tie-Down Strap - Double-J Hook - Zinc Bracket - 8' x 1-1/2" - 500 lbs # 317-902500 does not just have the Double-J hook replacement available. I recommend you look at the ProGrip Ratchet Tie-Down Straps - Double-J Hooks - 1-1/2" x 15' - 1,333 lbs - Qty 2 # 317-340720 to get the strap with hooks you need. The hooks are sewn into the straps so they are not available apart from the strap and the 1-1/2 inch width make this the best option for you. view full answer...
Go To Results