We only sell them in pairs as a replacement so for replacement endcap/locks for your Rhino Rack roof rack part # RRRVP27 you would want the part # RRRVL2 and you'd be set. view full answer...
The correct bracket and mounting hardware for a grille guard that fits your 2001 Jeep Grand Cherokee is going to depend on the manufacturer and model of your guard, and please note that grille guards are not universal fits, they are made to fit certain vehicles, as is the hardware.
For a 2001 Jeep Grand Cherokee, the grille guard that fits is the Westin Sportsman Grille Guard # 40-0125 and the brackets and hardware are the Replacement Hardware Kit # 40-012PK. view full answer...
The Replacement Key for RockyMounts Lock Cores - E125 # RKY0360-E125 Fits a RockyMounts lock core # E125. This is the only "E125" key that we currently have. If you can provide me with the manufacturer of your roof rack, I would be happy to look further into this for you. view full answer...
A Thule lock core with number E091 can use the replacement key part # THKEYN091 which is cut the same. My Thule contact confirmed this key will work in your lock.
If you ever need a replacement lock core you can use part # THLOCKN091 which you will install using Universal Change Key # 853-1251.
If you should ever want to change out all four lock cores on your rack the kit you can use is part # TH450400. This complete lock set includes 4 lock cores, 2 standard keys and the Universal Change... view full answer...
To install a Prodigy P2 # 90885 brake controller in your 2013 Jeep Grand Cherokee we have the install harness part # TK93VR which is a confirmed fit and would be all that you'd need other than the controller to complete the install.
I attached an install video for this for you to check out as well. view full answer...
Yes, you can buy just the arms for the Roadmaster Direct-Connect Base Plate Kit part # 1419-8 on your 2003 Jeep Grand Cherokee and for that you will want to use the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS. In order to use the above with a Blue Ox Tow Bar you will also need the Blue Ox Tow Bar to Roadmaster EZ5, MS, and MX Base Plates Adapter Brackets part # BX88185. view full answer...
I checked the Long Chih trailer website for details about the seals and bearings used on your model 202 trailer but I could not find that item on their site among their utility and boat trailers.
You can select the correct replacement grease seals in one of two ways. First, you can pull the old seal and check it for a part number. Please refer to the linked diagram for the usual appearance and location of a seal part number. You can search our site using the part number.
Or you can measure... view full answer...
To determine if the grill guard you have will fit your 2004 Jeep Grand Cherokee I would have to have the manufacturer information and model number for the guard. It does look similar to the Aries Grille Guard # AA1044 which uses the Replacement Installation Hardware Kit # AABRKT-1044. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75699 reuses the factory bolts that are in the frame. I recommend contacting your local Jeep Dealer to order these bolts. This will ensure that you get the right grade bolt and it will not cause issues later down the road. view full answer...
My contact at Thule advised that for the crossbars on your 2014 Jeep Grand Cherokee that have lock core 163 you can use their Replacement Key # THKEYN163. This is sold as a single key so you might want order a few to keep spares on hand. view full answer...
Based on the picture you attached I believe you have a Husky Round Bar Weight Distribution System, for which the correct replacement head is part # HT31516.
Typically the only component of a weight distribution system that's interchangeable between different manufacturers is the adjustable shank. This means the Curt Head # C17075 that you referenced will not work on your existing Husky system. view full answer...
Usually an OEM transmission cooler will be located inside the radiator where engine coolant will work to lower it's temperature before routing it back through the transmission return line. In such a situation a failed radiator can cause leakage of coolant into the transmission, a fairly common problem on some Nissan vehicles.
Some do use two separate cooling assemblies that can be stacked together or that are made as one unit but I am not aware of auto makers actually routing the trans... view full answer...
If you have the Westin Sportsman Grille Guard # 40-0125 that is custom fit for your 2002 Jeep Grand Cherokee, then the correct replacement hardware kit is part # 40-012PK. This will include all the mounting hardware and brackets needed to install the grille guard on your Grand Cherokee. view full answer...
We've got you covered! Thule makes the locking portion of those Mopar racks, so their replacement keys will fit. For lock number E030, you'd want to use replacement key # THKEYN030. view full answer...
Thule used to have an E-series lock cylinder and key so I believe that the replacement key you are looking for is part # THKEYN042 on our site. This key works with N042 locks # THLOCKN042 as well as E042 locks from Thule.
Even though I am confident this is your key, if you want to send me pictures of your lock cylinders I can verify if this key will work or not. view full answer...
According to my contacts at Reese, the Multi-Tow 7-Way & 4 Pole Trailer Connector # 74682 is confirmed as a direct replacement of your factory installed 7-way wiring harness.
This product is a plug in application and you will just need to plug in to the vehicle established connector and mount the vehicle connection point on your 2012 Jeep Grand Cherokee.
I have included a link to this product page, and helpful article showing the functions of this 7-way connector for your reference. view full answer...
The Solera awnings are a slower retracting awning. They will only go as fast as the correct motor will allow. The # LC266149 is for Solera awnings older than 2015 and the # LC373566 is for Solera awnings made after 2015. Unfortunately there is not a motor that is recommended for the awnings that will retract them faster. view full answer...
You can get replacement arms for your Roadmaster Direct-Connect Baseplate Kit # RM-521440-5 with part # RM-ARMS. You will want to click on the instruction link on the # RM-ARMS page and fill out the information to place an order for this replacement part. I've also linked that instruction page to this answer for you to easily locate, as well. view full answer...
We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you.
You could assemble a solution of parts we offer that would consist of:
• JIF Marine 2500 lb 2-speed hand winch, part # 315-W2500D
• Winch Stand, part # CE31013G which is compatible with 2 inch wide pole tongues
• Bow Roller Bracket, part # CE31005PG
• 3 Inch Bow Roller, part # YR300B-325B view full answer...