Since your trailer hitch receiver has a 500lb tongue weight rating, and using the Roadmaster Spare Tire Carrier # RM-195125 will reduce the capacities by 33% you are correct that you are left with 335lbs of tongue weight capacity on your receiver.
Since the # RM-195125 weighs 44lbs and the spare tire weighs 75lbs that leaves your receiver with about 215lbs of tongue weight left, so you will be able to use the full 200lb tongue weight rating of the tire carrier without an issue.
You mentioned... view full answer...
We do not have replacement shanks for Haulmaster cargo carriers, but you could use the Malone Dual Hitch Extender, # MPG544. This adapter fits a 2 inch x 2 inch trailer hitch receiver and it provides a 2 inch x 2 inch receiver with a rise of 7-1/2 inches. Please note, only the bottom receiver on this adapter can be used for towing. The upper receiver should only be used for hitch mounted accessories such as bike racks or cargo carriers.
Also, it is important to note that using a hitch... view full answer...
Yes, we have just what you need. The Yakima EXO SwingBase Swing Away Hitch Extender - 2" Hitches
Item # Y34VR is a complete arm assembly for the Yakima EXO Swinging Enclosed Cargo Carrier for 2" Hitches # Y62VR. view full answer...
What you could use to raise up the Flint Hill Goods Cargo Carrier part # FHG77ZR that you have is the Curt Multipurpose ball mount # D210 which will give you additional vertical height and would be rated for the weight of your scooter and the carrier. view full answer...
I have an answer for you. Unfortunately, I confirmed with our engineering team that if you have an etrailer cargo carrier like the 24x60 etrailer Cargo Carrier for 2" Hitches # e98874, we do not carry a replacement tilting mechanism for those carriers. With that being said, the only route forward is a custom fabrication or to purchase a completely new unit. However, we do not recommend a custom fabrication due to safety concerns. view full answer...
The anti-rattle pin for the Folding 24x62 etrailer Cargo Carrier for 2" Hitches # e98872 can be replaced with the Threaded Anti-Rattle Hitch Pin and Clip # e98910 or upgraded to the Lock for etrailer Cargo Carriers # e99047. view full answer...
I have a solution for you but it's not a folding carrier unfortunately.
You can use Curt trailer hitch mount cargo carrier # C18151 on the back of an RV. You will want to avoid models that fold up because folding models have additional points of movements that could possibly fail due to the increased stress associated with being at the back of an RV. view full answer...
We have # HTAD and # 80303 that would work great for your hitch. We do not carry just the two support bars for the Rola Swinging Cargo Carrier. We have the Rola Cargo Carrier Swinging Arm Assembly # 10421 that you can get to complete your set up. view full answer...
The dimensions on the Replacement Threaded Hitch Bolt for SportRack Bike Racks and Cargo Carriers
Item # 05002400000 is 1/2 inch at a -13 course count. view full answer...
I do have an option for you but the 1-1/4" to 2" adapter sleeve that is included with the Curt Cargo Carrier part # C18110 is not available for purchase separately. I called my contact at Curt to confirm this. However, a 1-1/4" to 2" adapter sleeve is a fairly universal part so I do believe you would be able to make the Hitch Adapter part # 853-7489 work for you. view full answer...
There is not a replacement support tube that goes into the hitch available for the 20x47 Reese Cargo Carrier # 63155. I contacted the manufacturer to verify this.
If you are needing a replacement, you will need to replace the entire 20x47 Reese Cargo Carrier # 63155. view full answer...
You are correct that the Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers # SR0901 you have uses a Thule key, but unfortunately Thule does not offer a replacement key for the Y048 lock core as that key has been discontinued according to my contact at Thule.
I recommend replacing your current lock with the # SR0901 which will come with two keys, and since it use the Y040 lock core you can use Replacement Key # THKEYY040 should you ever lose the keys.
I included a video... view full answer...
The Rola Dart Clamp-On Fork Mount Bike Carrier for Railed Cargo Carriers # 59904 does not offer just the rear wheel tie downs as a replacement part. You will either need to replace the entire kit or go with a different option. For instance, you can use the Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier # CC-125 to wrap around the carrier and secure the wheel. view full answer...
It sounds like the pin that allows the cargo carrier to be tilted up or down is what you are missing.
I have attached a photo of the pin on a cargo carrier. If that is the pin and clip that is missing I recommend using part # C21510 as a replacement. This pin is designed for 2 inch and 2-1/2 inch trailer hitches and my contact at Curt said the pin would work well for you. view full answer...
The etrailer hitch cargo carrier part # e98874 has a 500 lb capacity so it would have more than enough capacity for your 150 lb Vespa. The dimensions of the platform are 24 inch by 60. If your wheelbase is short enough to fit in it this would work.
Now a better choice might be a similar carrier with a ramp like the part # FHG69ZR which has the same capacity but has a folding ramp to allow you to load the scooter easier. view full answer...
The small pin that holds the brackets to the ramp of the MaxxTow carrier # MT70260 should fit in a 5/16 inch diameter hole. We have 5/16 inch diameter snapper pin # 516-134TR that could work for you. It is a little longer than the regular pins on the carrier. view full answer...
The RockyMounts MonoRail Bike Rack part # RKY10004 comes with a threaded hitch pin and lock knob for security. If you need a new lock pod for either the bike or hitch lock we do offer this as the Replacement Hitch Lock Pod for RockyMounts Bike Rack part # RKY12006. If you need a new threaded hitch pin you'll have to reach out to the manufacturer.
The Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers is not compatible unfortunately. view full answer...