The Lippert Replacement 500:1 Motor for Electric In-Wall RV Slide-Out System # LC287298 would be the correct option if you are replacing a 500:1 motor in an electric In-Wall RV slide-out system.
Unfortunately, having your RV's information does not tell me what slide-out systems you have. The best way to replace a slide-out motor is by using the numbers off of your current slide-out motor. If you can provide me with the numbers or a picture of your current slide-out motor, I would be happy... view full answer...
The Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC34FR is one of two parts that help retract your awning. The other part is the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC87FR. This is the part that has the spring wrapped around it and sounds like what you are describing. The Spring and Rod are not available independently. view full answer...
If you have an older style Solera awning we currently offer the following replacement components:
Replacement Bracket Kit for 2019 - 2022 Solera RV Slide-Out Awnings - Black # LC795354
Replacement Bracket for pre-2019 Solera RV Slide-Out Awnings - Black # LC2724412
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black # LC34FR
Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black # LC87FR
Replacement Extension Rod for pre-2022 Solera... view full answer...
It sounds like you are looking for a new motor for an RV slide out.
I checked with my contact at Lippert Components, which makes the majority of OEM trailer and RV frames and slide-outs, and they do indeed have a direct replacement motor. You will want to order item # LC386321.
My Lippert contact as able to confirm this item is the correct replacement based on the part number you provided. view full answer...
We have a few different slide out rollers so I've listed them below so that you can measure your current roller and see if we have a compatible match. I've separated them by surface mount and recessed mount as well.
Surface Mount:
Global Link Replacement Roller for RV Slide Out # 295-000180 (4-1/8" long x 4-1/2" wide x 1-3/16" high)
Global Link Replacement Roller for RV Slide Out with Guard # 295-000179 (6-3/8" long x 1-5/8" wide x 1-5/16" high)
Global Link Replacement Roller for RV... view full answer...
The Solera RV Slide-Out Awning # LCV000163298 fits RVs with silde-outs 140" - 145" wide and up to 48" long. It is also available in black with part # LCV000177334. I have attached an installation video below along with a working instruction link for your reference. view full answer...
We do have the replacement Spur Gear for Lippert In-Wall Slide-Outs - 16-Tooth # LC58VR that you need. We also have the Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out # LC379060 should you end up needing the bearing blocks as well. Unfortunately we do not have just the plastic caps (shoes) for the bearing blocks. view full answer...
I did some checking and it looks like Polarity Reversing Solenoid by Trombetta # LC118246 is the correct replacement solenoid for your trailer and hydraulic slide-out. view full answer...
Unfortunately having your RV information, 2021 Winnebago Micro Minnie doesn't tell me the correct slide out that you have. If you have Lippert in-wall slide-outs, then we have the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC26VR for the float side.
The # LC26VR includes:
- 1 Upper slide rack
- 1 Lower slide rack
- 2 Rack-end pugs
- 2 Rivets
- 2 Rollers
- 2 Snap rings
- 6 Wear plugs
There is also the Lippert Replacement Standard Bearing Block Kit #... view full answer...
If by outer flange you're referring to the slide-out on your 2018 Forest River Cedar Creek 5th Wheel, you are correct.
For the 83-1/2" slide-out you will need the Solera RV Slide-Out Awning # LCV000163287 (white) or # LCV000165062 (black). For your 153-1/2" slide-out you will use the Solera RV Slide-Out Awning # LCV000163300 (white) or # LCV000168109 (black). These awnings will extend 48" and provide your slide-outs with protection from water and other debris that might affect proper... view full answer...
The Replacement Standard Dual Rack Repair Kit for Slide-Outs, Float Side # LC26VR and Fixed Side, # LC84FR is specifically for the Lippert LCI Slide-Out. If your 2013 Itasca Meridian is built with this slide-out, check for tags on the components or in the printed literature for your motorhome to verify, then this is the correct replacement part. view full answer...
It sounds like you are looking for a replacement hydraulic cylinder for a slide-out. If that is the case then the closest match we have to the information provided is the Lippert Replacement Hydraulic Cylinder for RV Slide-Out part # LC42FR which measures 41-5/8" long. view full answer...
We do have the part you're looking for. The replacement slide out motor for the Power Gear 524276 Motor on your 2004 Fleetwood Discovery is the Lippert Components RV Slide-Out Motor part # LC368193. view full answer...
To replace your defective Power Gear 130-1305 RV Slide-Out motor, you'd use the LCI # LC368446 as confirmed by Lippert.
The LCI # LC386322 motor you referenced replaces a different Power Gear motor, the 13-1127, so it's not the one you'd want. view full answer...
I reached out to my contact at Lippert who made Power Gear. The replacement motor you want is the Replacement Gear Motor for Lippert Components Single Rail Above Floor Slide-Outs # LC368221. This is the only direct replacement for your 524664 Power Gear motor. view full answer...
No, the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC26VR includes the slide racks and the following pieces of hardware:
2 Rack-end pugs
2 Rivets
2 Rollers
2 Snap rings
6 Wear plugs
I've attahced a photo of the hardware and a review video of the whole kit for you to check out. view full answer...
Thanks for reaching out!
According to my research the Lippert In-Wall RV Slide-Out Motor # LC236575 is what you're looking for to replace your Schwintek 170000 slide-out motor. view full answer...
I have a solution for you, but my contact over at Lippert tells me that you won't be able to replace just those casings on Solera Slide-Out Topper. The parts you need are the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC87FR and the Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC34FR. You will want to re-use the hex rods, but you will need to replace the entire roller tube assembly to get the "arms" that are broken on your... view full answer...
I was able to cross reference the slide-out motor 522735 to the Replacement Gear and Motor Assembly for RV Slide Out part # LC386735 which is the correct replacement. The third wire on your old motor is for the brake release which is built into the new motor so three wires is not needed, only two. The brake release wire can just be capped off as it's not used. view full answer...