I do have a roof rack option for your Mitsubishi Outlander Sport with a completely bare or naked roof (no factory side rails or crossbars), however, according to SportRack, their Semi-Custom Roof Rack # SR1010 is not confirmed to fit your vehicle.
The least expensive roof rack option for your Outlander Sport is the Rhino-Rack Roof Rack # RRVA126B-2, # RRRLKVA, and # DK289 which securely attaches to the factory fixed mounting points on your Outlander Sport, as shown in the attached photo.
It's... view full answer...
Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some people will use open steps for leverage, vices and even car jacks to apply controlled force to bend the hitch back.
You will want to look for flaking paint and physical stress marks on the hitch before and after you attempt to bend the hitch back.... view full answer...
Your options for transporting rooftop cargo on your 2012 Mitsubishi Outlander Sport with no roof rack include soft cargo bags that do not require a roof rack as well as metal cargo baskets and plastic cargo boxes that do require a roof rack. The size and weight of the cargo you need to carry may help you determine which option is best. The linked article will help you evaluate all options.
Soft fabric cargo bags such as the waterproof 18-cubic-foot Rightline Sport 3 XL Rooftop Cargo Bag... view full answer...
I have just what you are looking for to add a roof rack to your 2016 Mitsubishi Outlander Sport with the flush side rails. You can use a Rhino-Rack Vortex roof rack using crossbars # RRVA126B-2. And then you would just need the foot pack # RRSX031.
This system more economical than other major brands and maintains all of the quality. view full answer...
I have another option for you, but the rear rack will more than likely interfere with the arm of the Inno Tire Hold 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Tilting # INH120 that secures the rear tire.
Instead I recommend frame mount rack like the Swagman Chinook 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting - Frame Mount # S64683 which will hold your bikes by the frame, and will accommodate two bikes weighing up to 45lbs each with tires up to 3" wide. If your... view full answer...
For the 2017 model year, Mitsubishi offered two different Outlander models. There's the 7-passenger Oulander and the 5-passenger Outlander Sport, both of which use different hitches, but the Curt # C13163 is confirmed to bit both as long as it is not the PHEV model.
To use a combo bike/cargo rack like the Yakima # Y54ZR on the Outlander, I'd recommend the Curt Class III hitch, part # C13163 the hitch has a 600 lb tongue weight capacity, which would be limited to the 350 lb tongue weight... view full answer...
I checked with Thule and the K45 K-Summit chains part # TH02230K45 are a fit for your tire size of 225-55-18 that you have on your 2015 Mitsubishi Outlander. Now if there ever was a chain that was going to work on your vehicle this would be it as it requires no inner sidewall clearance and only a very slight amount above the tread. Most likely this would fit your vehicle and work well but you will have to clear that with Mitsubishi first.
You might try contacting a dealer in an area that... view full answer...
We have great roof rack solutions for your 2015 Mitsubishi Outlander Sport with flush rails, the Rhino Rack roof rack part numbers # RRVA126B-2 and # RRSX031.
The Rhino Rack I mentioned is a really great option as the bars are aero shaped which minimizes wind noise but also you get a higher quality rack at a much better price. view full answer...
If your 2017 Mitsubishi Outlander Sport roof has flush mounted rails that run front to back, I recommend the Thule Podium Square Bar Roof Rack. This system is confirmed to fit your vehicle and consists of parts # TH712200 for two 47 inch crossbars, # TH710601 for the foot pack and # THKIT4017 for the custom fit kit.
The square crossbars on this system will provide a 165 pound weight capacity. The bars themselves are 1-1/4 inches wide x 7/8 inch in height and will be compatible with your... view full answer...
The bottom of the Rhino Rack Vortex crossbars do have openings in them which can cause whistling. The openings are typically due to the measurement sections that get removed for securing the bar to the feet.
Best solution is a fairing which will direct air over the bars and prevent the whistling. For that we have the part # RRRF2 which would fit well for the part # RRVA126B-2 that you have. view full answer...
For your 2013 Mitsubishi Outlander Sport the Curt Hitch part # C13079 would be a great choice as it is a Class III hitch with a 2 inch opening. For trailer wiring you would want part # C56127.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If... view full answer...
For your 2013 Mitsubishi Outlander Sport the wiring kit you need is dependent on whether your tail lights have light bulbs or if it has a bunch of the little bubble/small dot lights. If you have the large bulb lights, then you will want the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. If you have a bunch of the small dot style lights, then you will want the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118538. If you cannot... view full answer...
In order to mount your carrier and mobility scooter on your trailer hitch I recommend using the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-513. This fits a 2" receiver and gives you 2" stacked receivers for multiple height options. It has a maximum 5" rise/drop and a tongue weight capacity of 1,500 lbs which will be more than enough for your needs.
I have attached some video reviews as well as a link to all of our Gen-Y ball stacked receivers if you need a different rise/drop.... view full answer...
I can help you route your 4-way to the # ETBC7.
First thing I would search the cargo area where your wiring harness connector is for a factory grommet to get the 4-pole through.
If there is no grommet the best thing to do is to drill a small access hole to run the wires through. I recommend using the snap bushing grommet # SWC8055 and instead of splicing into your vehicles harness (voids the warranty), I recommend making the splice and reconnection in the 4-way to 4-way loop # HM48145.... view full answer...
In addition to the Curt trailer hitch you have selected for your 2015 Mitsubishi Outlander Sport you will need a wiring harness, ball mount, ball, and a hitch pin with a clip.
For a trailer wiring harness I recommend # 118538. It does work with the LED lights on your Outlander Sport so that will not be a problem! I have included a link to a video review of this harness for you.
For a ball mount I recommend # C45030. For a 1-7/8 inch ball I recommend # 19260, for a 2 inch ball I recommend... view full answer...
For your 2012 Mitsubishi Outlander Sport with a naked roof that has fixed mounting points for a roof rack the Thule Evo Bar roof rack part numbers # TH711220, # TH460R, and # THKIT3093 is a confirmed fit and would give you an excellent roof rack that is high quality and very quiet.
If you were looking for a flush bar setup where the bars did not extend past the feet of the rack the Rhino Rack ROC25 part # RR59MR would be a great solution too that's quieter and high quality. view full answer...
The Covercraft SeatSaver Custom Seat Covers # SS7466PCCH that you referenced were custom designed to fit the second row of all models of the 2015 Mitsubishi Outlander Sport so I can guarantee it will fit your vehicle very well.
It uses a slip-on design that will install easily and will stay in place. view full answer...
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56127 is a confirmed fit for your 2011 Mitsubishi Outlander Sport as long as you have LED taillights. We do not have an installation video, however I can walk you through the installation. This custom-fit T-connector plugs into your Mitsubishi Outlander Sport's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to... view full answer...
The LED taillight designation of the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11142385 that you referenced refers to the vehicle. This is designed for versions of the 2015 Mitsubishi Outlander Sport that have LED taillights and can work on trailers that have or do not have LED taillights. view full answer...
Go To Results