The only hitch we offer for your 1990 Mitsubishi Montero is the Curt hitch part # 13091 which has a 1-1/4 inch opening. The only way to use a 2 inch hitch accessory with this hitch would be to use the hitch adapter part # HTAD.
Only thing about hitch adapters like this is that they cut the capacity of the hitch they are used on in half. view full answer...
When we installed the Draw Tite hitch part # 75116 on a 2004 Mitsubishi Montero like yours we found that the distance from the center of the hitch pin hole out to the rear most portion of the spare was 13 inches.
That means you will need a bike rack that has at least 13 inches of clearance from it's pin hole to the upright bar of the rack.
The # TH934XTR has a distance of 13-1/2 inches from the pin hole to the upright bar of the rack. So it would be very tight, but technically the rack... view full answer...
You are correct. The Curt hitch part # 13091 that you referenced is rated for towing up to 4,000 lbs. Because of that you would be limited to only towing that even if your vehicle is rated to tow more.
In a towing setup your overall towing capacity is only as strong as the weakest component. So in your case it would be the hitch at 4k.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise... view full answer...
You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver.
I have attached the installation instructions for you to check out. view full answer...
Interference like you described would not be possible. The Curt Echo Mobile Trailer Brake Controller # C51180 pairs specifically to your phone via BlueTooth which is very secure and because of this would not accidentally get controlled by someone in a different vehicle with the same controller. view full answer...
I do have an option for you, however the Buyers Products Receiver Tube # 3371804055 that you referenced will not line up with the existing holes on your Mitsubishi Montero's frame behind the bumper.
For a 2 inch hitch receiver that is confirmed to fit your 1999 Mitsubishi Montero as long as it isn't the Sport model I instead recommend the Curt Class III # 13091. This hitch will line up with the existing holes on your vehicle's frame for a no-drill installation and will provide you with... view full answer...
Go To Results