Expert Answers about Lance
- Best Way to Improve Ride Quality of 2015 Lance 1995 Travel Trailer
- Looks like your 2015 Lance 1995 travel trailer has 3,500 lb leaf spring trailer axles that have a 2-3/8 inch diameter so the best solution we have to improve the ride quality of it would be a shock kit like the # LC281255 which you'd need one for each axle.
This slows down the movement of the suspension so that it allows it to be much smoother. Without shocks suspension will act like a pogo stick but this slows it down so that it actually makes the ride quality more like a vehicle...which...
view full answer... - Recommended Lift Kit for 2018 Lance Travel Trailer 2285
- It looks like your 2018 Lance 2285 uses a leaf spring suspension so you wouldn't want to use the # K71-707-02 for torsion axles. Based on my research, it looks like you have 3,500 lb axles on your trailer which would have a diameter of 2-3/8". I recommend verifying this information to be sure.
Assuming your axles are sitting on top of the leaf springs, you can use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00. This will move the axle underneath the leaf springs, raising...
view full answer... - Do You Have a Recommended 1-1/4 Inch Bike Rack for a Travel Trailer?
- I think I have the answer. I confirmed with Lets Go Aero that the Bikewing 2 B01311 should not be used on a travel trailer. We do not recommend using 1-1/4 inch receivers on travel trailers because a 1-1/4 inch bike rack/hitch combination is not very secure on a travel trailer shank with the added torque experienced at the end of a trailer during travel (especially with added bike weight).
However, there are many 2-inch hitch/bike rack combinations that are guaranteed to get the job done...
view full answer... - Over/Under Conversion Kit For 2022 Lance 1995 Travel Trailer
- Good question, and the Dexter Torflex lift kits are for square torsion axles, while the over/under kits are for standard round axles with double-eye springs. Your 2022 Lance 1995 travel trailer utilizes round 3,500 lb axles, so you will need the over//under kit, with the correct part being the following:
- Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00
The # K71-384-00 will not void the warranty of your Dexter axle, and lifts your trailer approximately the same amount as...
view full answer... - Camper Cover Recommendation for 2022 Lance 850 Truck Camper
- For your 2022 Lance 850 truck camper that measures 18 feet in length the best option for a cover is the Camco Ultraguard part # CAM45770 which provides the best protection in hot and dusty climates and also is easier to fit and install.
view full answer... - Does The Camco UltraGuard Slide In Camper Cover Have A Door Access Point.
- Thanks for reaching out about this product.
The Camco UltraGuard Slide-In Camper Cover - 16-1/2' Long # CAM45771 does have integrated zippers to help you access your truck camper.
However they are on the corners and, to me, seem to be more of a hassle.
I would recommend the Adco SFS AquaShed Truck Camper Cover - 16' Long - Gray # 290-12262. It has an easier way to access the back door and they are higher quality.
That said they are still made of fabric and no matter what you decide...
view full answer... - Could Torklift GlowStep Scissor Step Fit 2018 Lance Truck Camper 825
- What's the entry height of your Lance? I am sure we have a set of the Torklift Glowsteps that will work but we need to know for sure the entry height to pick out right size. For example, the part # TLA7844 fits the height range of 31-42 inches.
And the part # TLA7845 fits the height range of 38-1/2" - 50".
view full answer... - Could SnapPad Mini Jack Pads Fit 2019 Lance Model 1062 Camper
- While we don't know for sure if the SnapPad Mini Jack Pads part # SN39FR will fit your 2019 Lance Model 1062 if you can measure the feet of your jacks now it should be pretty easy to figure out. If your feet are 5-1/2 inches square these will work. If you have a different size let me know or check out the attached link to see all of the options we have where you can select your foot size from the drop down menu.
view full answer... - Recommendation to Carry a Generator on a 2020 Lance 1475 Camp Trailer
- We definitely have a couple options available to carry your generator, though it will depend on the weight of said generator.
First, the Stromberg Carlson Trailer Tray Cargo Carrier # CC-255 will install on the A-Frame at the front of the trailer. This has a 300 pound capacity and being 29 inches tall, it will typically clear any accessory or propane tank. The only downside is it can get fairly tall making it difficult to get the generator up onto the carrier.
I tend to like the bumper...
view full answer... - Can a 2" Weight Distribution Shank Be Swapped Out for a 2-1/2" Shank
- Yes, you can swap out a 2" weight distribution shank for a 2-1/2" weight distribution shank. This will actually be the preferred method instead of using a sleeve adapter as there will be much less movement inside the receiver tube. I recommend the Equal-i-zer Weight Dist Shank part # EQ90-02-4800 but have attached a full list of options below.
Please note, weight distribution shank are universal and not brand specific.
view full answer... - Lift Kit that Can Fit 2014 Lance 1995
- The Torflex lift kit part # K71-707-02 can work on side mounted plates but just not the top mounted so this would work on your 2014 Lance 1995.
view full answer... - Storage Cover Recommendation for a 19 Foot 2018 Lance 975 Truck Camper
- For a better cover than the Camco UltraGuard Slide-In Camper Cover # CAM45773 you originally purchased, I recommend the following for your 19' 2018 Lance 975 Truck Camper:
- Classic Accessories PolyPro III Deluxe RV Cover # CA80037
This cover is backed by a 3-year warranty as opposed to the 2-year from Camco, which goes to show the confidence Classic Accessories places in their product. It's also important to note that all storage covers tend to be a sort of fragile so it's good to put...
view full answer... - Roof Rack Recommendation for 2023 Lance 2075 Travel Trailer
- SportRack manufactures a rack that is specifically designed to fit the roof of pop-up campers that would work great for you.
The SportRack Pop-Up Camper Roof Rack, # SR1020, has steel constructed adjustable square roof rack bars and would work great on your 2023 Lance 2075 travel trailer. The bars will adjust to 80, 83, and 86 inches long and include 4 roof-rack feet that will mount to your camper's roof. As long as your roof isn't curved this would be the best option since there aren't...
view full answer... - Is Replacement Jack Crank Hub Cap for HappiJac Camper Jack System # LC34HD Sold Individually
- The Replacement Jack Crank Hub Cap for HappiJac Camper Jack System # LC34HD that you referenced is sold individually. If you needed 4 you'd need to order a quantity of 4.
view full answer... - Roof Rack that Fits Lance 855S Camper
- We have the Swagman Roamer LT camper shell roof rack part # S80510 which would work great on your Lance 855S camper but this is a universal style roof rack that would require drilling. We don't have anything custom fit for your camper at this time.
view full answer... - Would Torklift Glowsteps TLA8102 Fit 2021 Lance Travel Trailer 1995 Model
- The Torklift Glowstep Revolution Scissor Steps # TLA8102 would be the correct fit for your 2021 Lance model 1995 travel trailer if your entry height was between 18-1/2" to 28" and you had room for the mounting bracket width of 25-1/2 inches.
view full answer... - Recommended Bike Rack for a Travel Trailer with a 1-1/4" Hitch
- I have a possible solution for you.
First, though, it isn't recommended to use a 1-1/4" hitch for bikes on a travel trailer because they aren't able to handle them.
Instead, your best bet is to upgrade your hitch to a 2" receiver. I recommend the Curt Adjustable Class III, part # C13701. It adjusts between 18" and 51". It fits box frames, C-channel frames, or I-beam frames. I've linked to a video review of it below.
With that installed, you could use the Swagman XP, part # S64940. It's...
view full answer... - Recommended Timbren Axle-less System For 2021 Lance Model 2445 Trailer Trailer
- I have an option that will fit the bill but is missing one feature you are looking which is having the longer spindle for wider off-road tires. The Timbren Axle-less Suspension kits in the rating you need for your trailer do not come with the longer spindles for wider off-road tires.
I recommend the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs # TASR5200S03 which has 4" lift to better level your 2021 Lance Model 2445 Travel trailer to your 2017...
view full answer... - Vent Cover Recommendation for Fan-Tastic RV Roof Vent
- For the Fan-Tastic roof vents like the # FV807350 you'd need to use a Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500BL as it is a fit but the MaxxAir that you mentioned only fits MaxxAir vents.
view full answer... - Best Cover For 2017 Lance 975 Truck Camper For Winter Weather
- You'll want a heavy-duty cover for your 2017 Lance 975 truck camper to withstand the soggy winter weather, and the best option that fits your camper is from Camco:
- Camco UltraGuard Slide-In Camper Cover - 19-1/2' Long # CAM45773
The UltraGuard # CAM45773 is designed to withstand a great deal of moisture, be it rain or snow, due to its top being triple-layered. It is also vented so that the wind can pass through without added stress on the cover, and it has adjustable hold down straps...
view full answer...
Go To Results