Most snow plows do include a kick stand like # 3371304710 for easier support when moving or storing the unit, however not every model includes this component. In this case simple jack stands would be used in its place for stability when it's off the truck.
Now as for the shoes on your snow plow, these are attached to the bottom of the blade and will essentially raise the blade up just a bit to keep it from pushing gravel or dirt along with the snow you're trying to clear. Whether or not... view full answer...
I have the Replacement Back Drag for Western/SnowEx/Blizzard Snow Plows part # 3371311212 which is 8' long and will match your needs.
To attach it use the Replacement Mounting Bolts for Western Snow Plow Cutting Edges part # 3371301061. view full answer...
The fitment of a snow plow mounting kit will vary by manufacturer therefore I would need to know exactly what snow plow mounting kit you are using in order to confirm fitment. However, if you are using a SnowBear snow plow then I can confirm the Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows part # SB397-013 is correct or if you are using a Detail K2 snowplow then I can confirm that the Custom Mounting Brackets for Detail K2 Snowplows part # K284311 is correct... view full answer...
We have several snow plows that can be adjusted from inside the cab of your 2008 Honda Ridgeline. For this you can choose from the SnowBear Personal Snowplow part # SB324-080, or the Detail K2 Rampage II Snowplow, part # K2RAMP8219.
The best snow plow of these three options is the SnowBear Personal Snowplow. Unlike the other two choices, this snow plow sits close enough to vehicle to reduce leverage and strain on the plow, mounts, and vehicle. The in-cab toggle switch lets you raise and... view full answer...
The Curt Front Mount Trailer Hitch Receiver part # C31071 is an excellent option for a 2017 Chevrolet Silverado 3500 and will work perfectly with the SnowSport Snow Plows. The Curt hitch is actually the preferred option for snow plows due to the receiver tube height so this setup will work perfectly for you. view full answer...
I would go with the Curt front hitch part # 31042 over the Draw Tite part # 65005 as the Curt hitch has a lower hitch tube which we have found works better with snow plows. A lower hitch means the plow doesn't have to drop as far from the hitch which means less leverage on the plow assembly and hitch. view full answer...
If the Snowbear plow attaches to the vehicle with brackets and not a front hitch the kit you need is the part # SB397-105.
If instead you need a front hitch you would want the part # C31068. view full answer...
With a front hitch installed on your 2004 Jeep Grand Cherokee like the Curt # C31048 you can use a SnowBear plow like the part # SB324-081 that you referenced which was designed to attach to 2 inch hitches. view full answer...
We have snow plow solutions for your 1997 Toyota 4Runner but they use frame brackets instead of front hitches like with the bracket kit part # K285120 which would allow you to use the plow part # K2RAMP8219. view full answer...
The correct SnowBear plow mounting kit that fits a 2003 Ford F-250 is the part # SB397-017.
Since you said you have the older style plow with the receiver cups the correct replacement cross member is the part # SB324-136. view full answer...
If you are concerned at all about truck frame stress from a front hitch install I would recommend you go with a plow setup that does not use a front hitch and instead uses a set of frame brackets. For that the SnowBear Mount Kit part # SB397-132 would be the mount you'd want and then for a plow you'd want the SnowBear Winter Wolf Part # SB324-167 and you'd be set. On a totally different vehicle we once saw a front hitch break when using a snow plow so I'd rather recommend a setup that uses... view full answer...
Yes, the Curt Front Hitch part # C31020 would be an excellent choice for your 2012 Jeep Liberty so that you can do some snow plowing.
For a compatible snow plow that would do a great job and would be very easy to use I would recommend the K2 # K2AVAL8219.
This plow is super easy to use and doesn't require any wiring or winch operation for use. It's a simple to use and effective plow that would work great for you. view full answer...
All of the plows we offer designed to raise up when you are reversing so they would not be considered back drag plows.
For commercial plowing with your 2004 GMC Yukon XL you would want the SnowBear Winter Wolf Snowplow # SB324-167. This heavy duty plow is a pivoting, 5-position blade that will work well for you even on uneven ground.
For the custom brackets to install this plow on your vehicle you would want the part # SB397-007. view full answer...
Your Snow Wolf Plow specified part number 40003-S iron replacement shoes. I contacted my suppliers and they did not have replacement shoes for the Snow Wolf, but there might be a solution. You should take a look at the SAM # 3371303220 Heavy Duty Replacement Plow Shoe Assembly and see if that will work. I have included a link to this product and a photo with measurements to compare to your current shoe. 5-11/16" diameter shoe.
If you email me with specific measurements I can see if... view full answer...
I do have some great snow plow options for your 1999 Jeep Cherokee but I am not exactly sure what you are asking. The Detail K2 Rampage II Snowplow part # K2RAMP8219 that you referenced does indeed come with an electric winch that is used to raise and lower the plow. This is not an optional feature but rather standard equipment. There however is not a poly blade attachment for this snow plow, just the standard steel blade. It mounts using the Custom Mounting Brackets for Detail K2 Snowplows... view full answer...
SnowBear plows either install to a vehicle with mounting brackets or a front hitch. Since it sounds like your plow uses brackets the correct kit for your 2006 Jeep Wrangler would be the part # SB397-010. If you needed a hitch though the correct hitch would be the # C31028 instead. view full answer...
In order to mount a SnowBear Snow Plow on a 2011 Chevrolet Silverado you can use the Custom Mounting Bracket Kit part # SB397-002 which is designed for the two-point style mount or you can use the Retrofit Kit for SnowBear Winter Wolf Snowplows part # SB324-120 with the Curt Front Mount Trailer Hitch Receiver part # 31322 to convert from a two-point style to a one-point style. view full answer...
The correct mount kit to install the SnowBear WinterWolf Plow part # SB324-166 on your 2003 Ford F-150 depends on if you have 4WD or 2WD. If you have 2WD you'd need the kit part # SB397-104 or if you have 4WD you'd need # SB397-001.
These kits attach to the front frame of your truck and provide the correct attachment points for your SnowBear plow. view full answer...