Expert Answers about Hyundai Venue
- What Is The Easiest Way To Remove/Install The Saris Freedom From The Hitch?
- The Saris Freedom 2 # SA4412B is a great choice if you're looking for a light weight rack as it only weighs about 22 lbs! As far as making it as easy as possible to install and remove, maybe having a power tool to tighten down the anti-rattle bolt. I recommend threading it in by hand to start to make sure you don't cross thread the bolt. I always keep a Ratchet with a 3/4 inch socket # PTW38106-24 in the car with me so it's quicker to remove. It is a good size ratchet, so you will get plenty...
view full answer... - Can 2020 Hyundai Venue be Flat Towed Behind Motorhome
- If the 2020 Hyundai Venue has a manual transmission it is flat towable. For that you'd just need to start with a base plate kit part # RM78FR and you'd be set.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables,...
view full answer... - How to Transport Two Bikes with 2020 Hyundai Venue
- There's a great solution for transporting bikes with your 2020 Hyundai Venue, but the only hitch option for your vehicle is the Curt Class I Receiver Hitch # C57CR. This is a great hitch as it's durable and can support up to 200 lbs of tongue weight, which is more than enough to transport a bike rack and two standard bikes. The only downside is that it only has a 1-1/4" receiver, which limits the number of accessories that can be used with it.
If you need a recommendation for a bike rack...
view full answer... - Recommended Trailer Hitch 2022 Hyundai Venue
- Yes, we do have a hitch for your 2022 Hyundai Venue. I suggest the Curt Trailer Hitch Receiver, # C57CR. This is an easy bolt-on install. It is a class I rated hitch, 1-1/4" receiver opening and can be used for both towing as well as bike racks and cargo carrier.
If you plan on using this for towing, you will need the T-Connector Vehicle Wiring Harness, # C89CR, a ball mount, # C45521, the Pin and Clip # F-4, and depending on the size of your trailer's coupler either 1-7/8" Hitch Ball...
view full answer... - Parts Needed To Add Electric Over Hydraulic Disc Brakes To Triple Axle Toy Hauler
- I would be happy to help!
The only triple axle disc brake kits currently offered all have 1/2" wheel studs so we will need to piece a kit together for you.
I recommend the Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 7,000 lbs # K2HR79E which will fit the 7000lb Dexter axles you have, and gives you the 9/16" studs you mentioned. Since you have 3 axles you will need 3 of these kits.
Next you will need brake lines of which I recommend the HydraStar Hydraulic Brake Line...
view full answer... - Trailer Hitch Receiver and Wiring Recommendation For a 2024 Hyundai Venue
- Yes, we have the Draw-Tite Trailer Hitch Receiver # DT24MR which I recommend for your 2024 Hyundai Venue. This is custom fit so you will not need to drill or weld any components of your receiver to your Venue.
I do recommend installing the Curt T-Connector Vehicle Wiring Harness # C89CR when you install the receiver. This will give you a 4-way flat that you will need should you decide to pull a small trailer or add Auxiliary Lights # C53201.
view full answer... - Recommended Bike Rack For Heavy Cruiser Bikes on Class I Hitch Receiver on 2020 Hyundai Venue
- For your 2020 Hyandai Venue, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C57CR is currently the only option we have and it is restricted to only allow class I compatible bike racks. There are many bike rack options that will not allow compatibility with a Class I hitch receiver, so since you have Townie bikes, I know they are heavier and as you stated have fenders which further limits your options.
I recommend the Thule EasyFold XT 2 E-Bike Platform Rack - 1-1/4"...
view full answer... - Best Priced Roof Rack for 2021 Hyundai Venue with Naked Roof
- The best priced roof rack for your 2021 Hyundai Venue that has a naked roof would be the Thule Wingbar Edge roof rack part numbers # TH33RE, # TH79SC, and # TH29RV. Unfortunately roof racks are pretty pricey in general.
view full answer... - Recommended Trunk Mount Bike Rack for 2020 Hyundai Venue
- I do have a few trunk mount bike racks available for a 2020 Hyundai Venue but the Hollywood Racks Express 3 part # HRE3 is not one of them. Instead, I recommend taking a look at the Yakima FullBack 2 Bike Rack part # Y02634 which is a confirmed fit. I know this may be a bit more than you are looking to spend but the quality of the rack is very high and it should last you a very long time. It's super lightweight, comes with a lifetime warranty, and has some really nice features to protect...
view full answer... - Which is Better Hitch for 2022 Hyundai Venue Curt or Draw Tite
- Both the Draw Tite # DT24MR and the Curt # C57CR are great hitches for your 2022 Hyundai Venue but the better option is the Curt as it does not require fascia trimming like the Draw Tite does. Aside from that you wouldn't notice much of a difference between install or use of either.
view full answer... - Best Trailer Hitch Receiver For 2021 Hyundai Venue
- For your 2021 Hyundai Venue I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C57CR which is confirmed to fit your vehicle, and will not require any drilling or trimming to the fascia of your vehicle.
The # C57CR is made right here in the USA so you know it is a quality product, and in our experience the powder coat finish on the Curt hitches are the most durable keeping the hitch looking great for years to come.
If you can tell me what you are planning on...
view full answer... - Can a 2021 Hyundai Venue Be Flat-Towed
- The 2021 Hyundai Venue can be flat-towed but only models with a manual transmission. If you have a manual transmission then in order to get the job done you will need a number of components such as base plates, tow bar, wiring, etc. I have attached a list below for a complete setup. In regards to warranty considerations, it would be best to review the Magnuson–Moss Warranty Act.
Blue Ox Base Plate Kit part # BLU64FR
Blue Ox Alpha 2 Tow Bar part # BX7380
Roadmaster Diode 7-Wire to 6-Wire...
view full answer... - Square or Aero Crossbars for Thule Roof Rack on 2020 Hyundai Venue with Raised Side Rails
- So the biggest benefit of aero crossbars on roof racks is that they are quieter, which leads to a more pleasant driving experience if you are going to leave the roof rack on your 2020 Hyundai Venue (and pretty much everybody does leave their roof racks on their vehicles year-round).
The square and aero Thule crossbars will be able to mount essentially all the same things, but because they are quieter, I do highly recommend the aerodynamic Thule WingBar crossbars. The square crossbars...
view full answer... - Do They Make a 2" Trailer Hitch for a 2023 Hyundai Venue
- The only trailer hitch options for a 2023 Hyundai Venue are class I, 1-1/4" like the Curt Trailer Hitch Receiver part # C57CR which is what I recommend. That said, you can convert this to a 2" hitch using an adapter like the Trailer Hitch Receiver Adapter part # e43YR or part # e93YR. Please note, using said adapter will reduce the hitch capacity by 50%.
Unfortunately, the Hyundai Venue is a subcompact so they don't make the larger hitch size for this as the vehicle can't benefit from...
view full answer... - Recommended Air Bags for 2017 Nissan Titan
- I recommend using the AirLift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle # AL88331 because they come with the internal jounce bumpers that the other available system does not. This is extremely important when it comes to protecting the bags in the event of air loss, since the jounce system acts as a fail-safe, but they'll also help improve the comfort of the ride. This kit comes with the manual inflation valves included that will allow you to install...
view full answer... - Can Replacement Install Hardware be Ordered for Curt Hitch # C13105
- Yes, we offer replacement mounting hardware for the hitches we offer with the part # RHK. You'd just need to select Curt as the manufacturer on the product page and then enter the part number of the hitch and you'd be set.
view full answer...
Go To Results