We have a number of trailer hitches available that are designed to install onto trailers like yours but looking at pictures of your 2018 Flagstaff Shamrock there are a few things that might work as obstacles for a standard frame-mount unit.
Your trailer features a welded bumper at the rear along with a mounted spare tire. Depending on where you would be able to weld/bolt on a frame-mounted hitch, this would likely lead to some clearance issues when it's time to actually insert an accessory... view full answer...
The iN-Command TPMS part # NCTP100 isn't specific to any one particular trailer but it will do just fine with this application. The sensors can be used on a vehicle or trailer and then that data gets transmitted to an app on your phone. This is a great device to help detect high pressure situations which can lead to a blow-out. view full answer...
The best hitch solution we have for the rear of your 2016 Forest River Shamrock 23IKSS that attaches to the trailer frame is the Curt # 13703 as it fits the widest frame width range and also fits all styles of frames.
Then for a 4 bike rack that is RV approved we have the Swagman XP part # S64940 which would work great as well. Not all bike racks can handle the rougher ride quality at the rear of an RV but this rack was designed for it. view full answer...
For your 2019 Flagstaff Shamrock 231KSS the best cover option is the Adco Olefin All Climate part # AD67ZR which we have confirmed is correct size and offers the best protection in all climates. It has an amazing cinching system to pull the cover tight and avoid billowing. This cover is also designed to fit travel trailer lengths between 20.1' and 24' in length which matches what you have listed. view full answer...
For your application I recommend using the Adco Olefin HD RV Cover # AD67ZR which fits trailers up to 24' long. The extra length that you found likely includes the trailer tongue or the spare tire carrier which aren't part of the equation when it comes to covers.
These storage covers are made with rooftop accessories, like an air conditioner and vents, in mind so you don't have to worry about the cover fitting over those parts. This cover is built for all types of climates including high... view full answer...
The correct lift kit is going to depend on what axle you have, which is not a fitguided item. We have a couple lift kits with 3.5" of lift. The Axle Riser Kit - Single Square Torsion Axle # LC382741 which is for square 3,500 lb. axles or the Axle Riser Kit - Single Diamond Torsion Axle # LC270682 which is for Diamond 3,500 lb. axles.
There are also over under kits, which basically flip your leaf springs to the top of your axle which lifts the trailer. There are two options here as well.... view full answer...
Since we know your 2014 Forest River Shamrock 23IKSS has 3,500 lb axles the bearing kit you would want is the # BK2-100 which comes with bearings # L44649 and # L68149. view full answer...
On the display of the Tireminder part # TPMS-TRAILER there won't be an alert or alarm that goes off if the sensor battery dies but there will be a blank display for that tire so you'd know that the battery had died. view full answer...
I spoke with my Reese Representative, who tells me the 22210 part number you provided comes back on an 800 lb spring bar used with the Reese SC Weight Distribution System, which has been discontinued. If this is indeed the system you have, the replacement head and shank are still available as part # RP54980. view full answer...
I checked with Yakima and the correct replacement hitch pin setup you'd need for the now discontinued SlickRoc is the part # Y8780022. view full answer...