I can certainly point you in the right direction. In order to mount a cargo box on top of your 2020 Chrysler Pacifica, you will need to have a roof rack with crossbars. We do not offer any aftermarket roof racks for the Pacifica. If you already have a factory roof rack, then you will be all set to mount up a cargo box.
As far as the cargo box, we will have plenty of options that will fit on your roof. It really comes down to how much space you need. A very popular box is the Thule Force... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76046-SK is what I recommend for a 2020 Chrysler Pacifica Hybrid. It has a hidden design so you don't have to worry about ground clearance issues as much which can be a concern on minivans and it makes for the best overall installed look. It has a class III rating with 2" receiver so it will be great for bike racks or anything else you want to use the hitch for like towing (if applicable) or cargo carriers.
For a bike rack, the Thule... view full answer...
It's normal for there is be movement with a hitch mounted accessory while driving but the hitch itself should not be moving. I recommend checking the hardware and looking over the hitch itself. The best way to help provide support and reduce movement is with a simple cam buckle strap, the Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories part # 18050. There are also built-in stabilization devices already on most bike racks. view full answer...
Cutting the heat shield to install the Draw Tite hitch part # 36798 does not affect anything enough to really make a noticeable difference. Basically at worst you might feel a little more warmth through the carpet at the rear of the vehicle if you were sitting there at idle but you'd never be able to tell the difference for normal use of the vehicle. view full answer...
Yes, we have the Curt trailer hitch part # C13383 which has been confirmed as a fit for your 2018 Chrysler Pacifica Hybrid and would work well. This is a Class III, 2 inch trailer hitch that would be your best option as it is the most popular hitch size so most hitch accessories would be made to fit it and it has the best capacities at 4,000 lb trailer weight and 400 lbs tongue weight. view full answer...
The etrailer hitch part # e98903 is the great hitch for your 2017 Chrysler Pacifica for carrying a bike rack like you are wanting. For rear cargo area access the best option for a bike rack is the Thule Apex Swing bike rack part # TH9027XT as it swing out and away from the rear of the vehicle to give you total access. It also can do so with bikes loaded on the rack as well.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested... view full answer...
Normally the Tekonsha trailer wiring harness part # 118723 is stored outside of the vehicle like you mentioned. In order to store it in the interior of the vehicle you'd need to find a grommet in the truck floor (if present) and route the 4-way through it so that it could stay inside away from the weather. Since this isn't how this was designed to be used/installed there's a chance the harness wouldn't be long enough.
If this is the case we have extensions like the part # HM48144 which... view full answer...
The EcoHitch part # 306-X7257 that fits your 2016 Subaru WRX STI has a hitch tube that doesn't have a back on it so the hitch pin depth of the Kuat Transfer V2 3 bike rack part # KU24FR would not be an issue at all. I would not recommend grinding or cutting the shank under any circumstances. view full answer...
The Curt hitch part # C12180 that you referenced does fit your 2020 Chrysler Pacifica Hybrid and does not require any additional components to install. With that said since you have a 2 inch hitch bike rack the part # C13383 would be a better option as it is a 2 inch hitch and the hitch you referenced is a 1-1/4 inch.
I attached an install video for this for you to check out as well. view full answer...
The Yakima SkyBox 21 Rooftop Cargo Box # Y07337 you referenced is a fantastic option for a cargo box and I highly recommend it for your 2019 Chrysler Pacifica.
The reason the SkyBox 21 is because of how easy it is to use and install while also providing 21 cubic feet of cargo carrying capacity - an abundance of space so you can carry a huge variety of gear.
This cargo box, which I confirmed will fit your 2019 Chrysler Pacifica with factory crossbars, has a lid that opens from either side... view full answer...
We sell the Hollywood Racks HR1500 SportRider SE as part # HLY84FR and the # HLY74FR we offer is the Hollywood Racks part number HR1560. We sell the same exact Hollywood Racks products, we just use different part numbers. Hopefully, this will eliminate the confusion.
The Hollywood Racks # HLY74FR is compatible with both 1-1/4 inch and 2 inch receivers, while the # HLY84FR works with 2 inch hitches only. For step through frame bikes such as yours, you'll want to use bike frame adapter bars... view full answer...
For your 2021 Chrysler Pacifica Hybrid the etrailer # e98903 is a confirmed fit and would work great. At this time (January 2021) it's the only option. view full answer...
A trunk mounted bike rack solution would work great for your 2022 Chrysler Pacifica Hybrid like the Yakima Fullback 3 part # Y02633 which is a confirmed fit. This attaches to the rear door/hatch and gives you a secure way to carry up to 3 bikes. This rack is lighter weight and also comes with locks for the bikes and locks for the rack as well. view full answer...
According to your owner's manual, FCA states that any chains used with your tire size cannot protrude more than 9mm to the inside of the tire. Extending any further than that could cause damage.
I have two alternatives that would meet that parameter. The first would be the Titan Snow Sock, part # TCH72. The stretchable fabric makes them easy to install and the fabric sticks pretty well to snow and ice providing friction. The fabric will not damage your vehicle. This being said though,... view full answer...
For a completely hidden trailer hitch, I recommend the Hidden Hitch Class 3 Trailer Hitch Receiver # DT92GR if you have a Hybrid Pacific or the # DT46GR for your non-hybrid 2022 Chrysler Pacifica. The hidden hitch is a custom-fit hitch that installs behind your vehicle's rear bumper so that the cross tube is always out of sight. The receiver easily removes when not in use. The 2" receiver will allow you to have a larger selection of bike racks available to fit your situation.
The T-One... view full answer...
I will be happy to help you out. For your 2017 Chrysler Pacifica I recommend the etrailer trailer hitch # e98903. This hitch will fit all models of the Pacifica, including both the hybrid and non-hybrid models. This is a Class III hitch with a 2 inch receiver.
Since you mentioned that you will be doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes... view full answer...
I looked up the weight of your 2017 Chrysler Pacifica and found it to be 4,330 lbs so our tow dollies like the Demco Kar Kaddy # DM9713093 would work great. This one has a 4,800 lb capacity and comes with surge disc brakes. We don't have anything that would also accommodate the additional weight of a 1,000 lb motorcycle though. view full answer...
Regarding a hitch for your Pacifica, I would definitely use the etrailer Class 3 Round Tube Trailer Hitch # e98903. The 2" receiver size has more options available than the smaller 1-1/4" size receivers. It has a nice finish and a limited lifetime warranty. This hitch will not have a negative impact on road clearance as there are other parts (like the exhaust) that hang lower than it.
It's beefy 2" receiver will easily hold a bike rack like the Thule # TH9058 “Camber” 2-bike rack or the... view full answer...
The Curt hitch part # C29UR that fits the 2018 Chrysler Pacifica does not have any additional steps required to install beyond what's mentioned in the detailed instructions link attached to this page. The other fit part # C65CR that's for the non-hybrid models has slightly different dimensions which allows for the different fit application and is not based on different install steps. view full answer...
It looks like the Aventon Pace 500 e-bikes weigh in at around 50-lbs per bike, so you'll need something that can handle at least that much, and because of the weight of the bikes you'll also need to have a 2" hitch receiver on your 2017 Chrysler Pacifica. I recommend using the Yakima HoldUp 2 Bike Rack # Y02443 which will tilt away to allow you access to the rear of the vehicle and can handle bikes up to 60-lbs. Since it's a platform rack it will be easy to get the bikes on and off, which... view full answer...
Go To Results