There is indeed a storage cover that fits the pair of generators included with the Champion 9,000-Watt Inverter Generators w/ Parallel Kit.
What you need are two (one for each generator) of the Storage Cover for Champion 2,800 to 5,500-Watt Inverter Generator # CH57FR. view full answer...
For your Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers # CC-255, we have the Storage Cover for etrailer 4,500-Watt Generator # 333-0010, which will fit generators measuring up to 18-7/8" long x 15-3/8" tall x 11-3/4" wide, which should fit your Champion 2500DF generator.
The largest cover we offer for generators that may also fit a jerry can, is the Classic Accessories Heavy-Duty Fabric Cover for 15,000-Watt Generator # CA79547, and measures 37" long, 25" wide, and... view full answer...
I may have a solution for you to cover the 3,200-Watt Portable RV Inverter Generator - 2,900 Running Watts - Gas - Remote Start # 333-0003, but there is not a cover specifically designed for this model. However, you can use the Storage Cover for etrailer 4,500-Watt Generator - Weather Resistant # 333-0008 and it will do a fine job- it's just a little bit larger than the 3800-Watt generator, so there will be some excess.
This would be the best available solution we have for this particular... view full answer...
In order to carry the 3200-Watt Portable RV Inverter Generator w/ Cover # 333-0003 on the back of your trailer with the 2" receiver you can use the 24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs # TLA7752. This carrier can fit generators up to 24" wide x 27" long, so it will work well for the 23-1/4" long x 17-15/16" tall x 17-7/8" wide # 333-0003 and the locking function on the carrier keeps your generator from walking away when it's unattended, so it's... view full answer...
Since the Champion 5,000-Watt Inverter Generators w/ Parallel Kit # CH39FR runs exclusively off of gasoline, so there is no need for a propane tank!
These generators actually just require a minimum of 87 octane regular gasoline with a maximum of 10% of ethanol to run.
If you're wanting to use a generator that is compatible with both propane and gasoline, then the:
- Champion 9,000-Watt Dual Fuel Inverter Generators w/ Parallel Kit # CH49FR sounds like what you're looking for.
These... view full answer...
You can indeed run a pair of Champion 4,500 watt generators in parallel. All you need is the compatible parallel kit and you're in business. The correct part numbers are the following:
- Champion 4,500-Watt Dual Fuel Portable Inverter Generator # CH44FR
- Parallel Kit for 3,000 to 5,500-Watt Champion Inverter Generators # CH84FR view full answer...
We do have a hose and regulator that you can use on your Champion 3500 Dual Fuel Generator model # 100264. You can use the Camco Automatic Changeover 2-Stage Propane Regulator # CAM59005, which is a direct replacement for the regulator on your generator.
For a LP hose I recommend using the Camco Propane Supply Hose # CAM59153 which has the male inverted flare that will fit that regulator and run to your propane supply. If you need a hose to run from the regulator to the generator, you'll... view full answer...
I have a couple options that you can consider for your Champion Dual Fuel Generator.
First is the simplest as everything can be easily attached to your current hose and regulator. The MB Sturgis Sturgi-Stay T-Fitting w Hose # 103615 will add a tee fitting going into your regulator and allow you to have 2 separate tanks connected to your generator. This will use your current regulator to control the pressure going into the generator. There is a shut off valve for the one remote line that... view full answer...
The cover you're looking for is not available, unfortunately, however you could just as easily use the Champion Generator Storage Cover for 2,800 to 5,500-Watt Inverter Generator # CH57FR.
This storage cover measures 26-3/8" long x 18-1/8" tall x 18-7/8" wide so it's just a tad bit larger than your generator that measures 23-1/4" long x 17-15/16" tall x 17-7/8" wide, but it'll still work fine. view full answer...
We have exactly what you need for much, much less than the dealer wants to charge you. It actually sounds like the dealer wants to install an on-board generator, considering the cost you mentioned. You only need a generator adapter for your trailer that will connect to your RV.
The correct one will depend on the plug you have on your 2019 Cedar Creek Silverback.
The Mighty Cord Generator Adapter for RV Power Cord - 50 Amp Female to 30 Amp Twist Lock Male # A10-G30350VP has a female end... view full answer...
I was not able to find any information on the Intellisource 45-amp power center but there is a product from Progressive Dynamics called the Intelli-Power 9200. This is a 45-amp power converter and battery charger for RV use. We carry similar items but not this particular brand.
A device like this will require AC input power to operate. This AC input power is processed and filtered and leaves the converter as stable 13.6 VDC which can charge your trailer batteries and operate it's DC lighting,... view full answer...
We do carry plenty of options to carry a diesel generator on the front of your RV, however I am going to need to know some specifics about the generator you have and how you're planning on carrying it.
If you're looking for something compatible with a trailer hitch then you'd need something like the 20x48 Reese Cargo Carrier for 2" Hitches # 6502, or if you're wanting to bolt it to your bumper then you'd want something like the 24x40 etrailer Cargo Carrier for RV Bumper # e99050.
Let... view full answer...
The etrailer brand # 333-001 generator puts out 1600 watts of running power, two of them paralleled together would put out 3800 watts, which would work very well for the sir conditioner you mentioned as well as your additional power needs. These 2000 watt generators don't need the # 333-0007 50 amp parallel kit UNLESS you need a 50 amp outlet. If you don't need the 50 amp outlet, the parallel cables included with the generators would be sufficient.
I've linked to a product demonstration... view full answer...
I may have a solution for you, but the storage cover # 333-0009 is no longer available. However, I've had a couple of other customers successfully use the Storage Cover for etrailer 4,500-Watt Generator - Weather Resistant # 333-0008 even though it's a bit bigger. This would be the only available option for a medium sized generator like your A-iPower. view full answer...
The Camco Automatic Changeover 2-Stage Propane Regulator # CAM59005 is the exact part that you need to power your Champion generator. This has a built-in red/green gas gauge to show you when each tank is empty and it also allows you to safely replace each tank without interrupting the gas flow from the one that you are currently using to power your generator.
If you don't already have pigtails for your propane tanks then the Camco Propane Supply Hose # CAM59153 which has the male inverted... view full answer...
The part you're looking for has been discontinued, but I do have a solution for you.
Because the 6,000-Watt Portable RV Inverter Generators - 5,500 Running Watts - Parallel Kit - Gas - Remote Start # 333-0003-2-0007 are 23-1/4" long x 17-15/16" tall x 17-7/8" wide, I recommend that you use the Storage Cover for etrailer 4,500-Watt Generator - Weather Resistant # 333-0008 which is designed to fit generators that are 25-3/8" long x 19-1/2" tall x 18-1/4" wide. This is slightly larger than... view full answer...
To confirm that you will be able to use the Camco Automatic Changeover 2-Stage Propane Regulator # CAM59005 you will need to ensure that the 11" nominal outlet pressure is enough to power your generator. This may be information that you can find in your generator owners manual or you may have to reach out to the manufacturer to get the information. The current regulator on your generator will have to be removed as the propane will not go through the additional regulator after going through... view full answer...
It sounds like your generator has a regulator on it since you were able to get it to work when you bypassed the regulator.
With this being the case you'll want to go with the MB Sturgis Sturgi-Stay T-Fitting w/ Hose # 103615 that I also mentioned on your previous question if the generator has a regulator. Just be sure to use the shut-off lever when you aren't using the 2nd tank. view full answer...
Based off of my research, your Honda EU3000UIS Inverter has a dry weight of 130.7-lbs.
With that being said, the MORryde RV Generator Slide Out Tray # MR37FR would be the closest we can offer that can work for you. This tray has a maximum weight capacity of 800-lbs, and the tray measures 34-1/4" long, and 22-7/8" wide.
Since your generator measures 25.9" long, 7.6" wide, and 22" tall, this is the closest cargo tray we offer that can fit your generator.
This slide out tray also weighs... view full answer...
In order to carry your generator on the back of your 5th wheel, you will need a hitch so you can attach a cargo carrier. Assuming the ramp on your Palomino will allow the hitch, you can easily add one, the Adjustable Width Trailer Hitch Receiver for RVs # 13703.
You simply need to measure the frame to make sure it is between 22 and 77 inches wide outside-to-outside in order to install this hitch, which can then be bolted or welded on.
The hitch has a 350 lb tongue weight capacity, which... view full answer...
Go To Results