Expert Answers about Volkswagen Beetle

• How To Get Replacement Hitch Installation Hardware Kit for 2017 VW Beetle
• To replace the mounting hardware of your Curt # C11354 hitch you'll want to use the part # RHK and put the model number of your hitch C11354 into the field marked "Hitch Item Number". This will give you replacement bolts plates and the fish wire you need to re-install a hitch on your 2017 VW Beetle.
  view full answer...


• Parts Needed to Flat Tow a 1973 Volkswagen Super Beetle
• I may have a solution for you, but I was not able to find any information on which model the #1112D corresponds to, since there are 2 different models in the VW Beetle and the VW Super Beetle. If you've got a SuperBeetle then I recommend using the Blue Ox Base Plate Kit - Fixed Arms # BX3809 and Blue Ox Acclaim Tow Bar - A-Frame - Car Mount - 5,000 lbs # BX4330. This tow bar comes with safety cables included, so it's one less thing that you'll need to complete your flat towing setup. For...
  view full answer...


• Trailer Wiring Harness For A 2017 Volkswagen Beetle
• Yes, you will have to run the extra to your battery for it to work properly on The Curt T-Connector Vehicle Wiring Harness # C56380. This harness will give you the attachment point that you will need to plug in your tail lights for your bike rack. The wiring harness will a 4-flat connector. This harness will plug into your vehicle's wiring harness, which is located in the rear cargo area. You will have to remove the trunk floor coverings, storage trays, rear scuff panel, and interior...
  view full answer...


• Pollak 6-Pole, Round Pin, Trailer Wiring Connector wire clamp
• The keeper/clamp you are talking about is not available separately unfortunately. It is an important part as well because it is designed to keep the pressures off of the actual connection and on to the main wire. I recommend replacing it as soon as possible or the wires going into it are likely to be pulled out. Use the connector you looked at Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End part # PK11604 and your issues will be solved. A couple quick tips for you... Once...
  view full answer...


• Progressive Dynamics RV Converter and Smart Battery Charger for Flooded Lead Acid Batteries
• For flooded lead acid batteries we do have the converter you need, which is the Progressive Dynamics 9300 Series RV Converter Charger # PD69RR. This converter is for flooded lead acid, AGM, and lithium batteries.
  view full answer...


• Need Replacement Installation Hardware for Curt Class I Trailer Hitch Receiver # C11260
• Hitch installation, or re-installation, should only be done with original or exact replacement hardware as specified by the hitch manufacturer. The weight rating for any hitch is dependent upon the use of the specific grade of hardware intended for it. We can help you obtain a complete replacement hardware kit for your hitch that includes all the required parts of the correct strength rating. All you need to do is visit our website and in the search box enter the letters RHK (for replacement...
  view full answer...