I have a great solution for you. Unfortunately, there are not any locking knobs that work with the MaxxTow Roof Mounted Cargo Basket model 70115. However, a great way to include security to your basket is by purchasing the Saris Cable Lock - 8' Long # SA981. With the Saris cable lock, you will be able to wrap the cable around your crossbars and your rails on your 2018 Subaru Crosstrek. This way, it will add an extra layer of security to deter the theft of your basket. view full answer...
No problem!
For your 2023 Subaru Crosstrek, with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 I recommend using the:
-No-Drill Mount for Electrical Mounting Bracket - Short # 18140.
This is a universal mounting bracket that will work with your Tekonsha 4-flat connector, and will zip tie around your hitch to also provide a no-drill installation. view full answer...
To install the Redarc Tow-Pro Liberty Brake Controller # RED52VR on your 2024 Subaru Crosstrek you are going to need our 7-Way Kit # ETBC7. This will connect to a 4-Way # C56040 if you do not already have one. If that is the case you will also likely need our etrailer Trailer Hitch Receiver # e98912. view full answer...
To get your 2018 Subaru Crosstrek set up for flat towing I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-52927-5 because I think it has a slightly easier installation than some others. Then the etrailer SD Non-Binding Tow Bar # e74ZR paired with the Replacement Base Pins # RM-910029 to attach to the base plate. The etrailer tow bar will come with the needed safety chains. I prefer the installed braking systems because you wont have to mess with moving the system in and out... view full answer...
I assume you're looking for the correct parts to flat to your Subaru Crosstrek, if that's the case you're going to need:
-A base plate kit # RM-52927-5,
-A tow bar # RM-676,
-A wiring kit # RM-15267,
&
-A braking system # BLU37TR with the 12V outlet kit # RM-9332 view full answer...
Thank you for all of the information!
Essentially you can use almost any drawbar that has a 1-1/4" shank for your application but Draw-Tite does recommend using the Drawbar # 36051 for the Trailer Hitch Receiver # 36644 on your 2019 Subaru Crosstrek. This has a 5/8" rise/1-1/4" drop and is compatible with hitch balls that have a 3/4" shank like the 1-7/8" # 19256 or the 2" # 19258. I have attached a link to a helpful article showing you how to determine is the rise/drop of this drawbar... view full answer...
I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # C56243 as an option that works for the hybrid of the Subaru Crosstrek. The below installation video is a great help when you're ready to get started.
If you don't already have a hitch, the etrailer Trailer Hitch Receiver Class III - 2" Item # E98838 is confirmed to fit and is available in a matte black finish for a nice, less obvious look. view full answer...
Even though The Curt Trailer Hitch Receiver # C13382 is not confirmed to fit your 2023 Subaru Crosstrek Non Hybrid we do have another option for you. The Draw-Tite Trailer Hitch Receiver # 36644 is confirmed to fit. No drilling is required for installing the Draw-Tite hitch onto your vehicle, so you will not have to enlarge the mounting holes.
The Draw-Tite hitch has a maximum gross trailer weight up to 3,500 pounds and has a maximum tongue weight up to 350 pounds. I would recommend checking... view full answer...
I have a great 7-way solution for you. While we do not carry a customized 7-way that installs on your 2020 Subaru Crosstrek without splicing, we do have a universal installation method that will work great for you. That is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7. This kit does require splicing into your current wiring.
It is important to note that when using this kit, you do need to have a 4-way harness already installed. If you need... view full answer...
For your application I recommend the LED Light Strip Kit with Wireless IR Remote # DG52694 as well as the Add-On LED Light Strip # DG52697 (which I confirmed will work together according to my contact at Diamond Group).
Each of these kits comes with 33' of light strip so you'll have right at the 66' length you're looking for, plus these have a rubber-type construction so they are flexible enough to accommodate the 90 degree angle you are needing to use. The light strips have 16 different... view full answer...
For your 2022 Subaru Crosstrek, I'd recommend the Tekonsha # 118467 Trailer Wiring Harness.
If you don't already have a hitch in mind, I'd recommend the Curt # C13382 Class III hitch. You'll also need a ball mount like # 2753, and for a trailer ball, use # 19260 for a 1-7/8 or # 63845 for a 2 inch ball. view full answer...
The Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 are just the crossbars themselves. You will also need the Rhino-Rack SX Series Legs # RRSX100 to attach the crossbars to the raised rails of your your 2019 Subaru Crosstrek. view full answer...
Yes, the Curt Trailer Hitch Receiver item # C13382 is confirmed to fit your 2022 Subaru Crosstrek. It is custom fit and attaches to your Subaru by bolting directly to your frame with included hardware. This hitch receiver has a Maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs.
If you are in need of a wiring harness to control your trailer's lighting functions I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #... view full answer...
I wasn't able to find anything that said the manual transmission model cannot be flat towed. With that being said it's not up to me, it's up to Subaru. And I can't recommend you going against what they're telling you. There very well could be other factors that prevent the car from being flat towed other than the transmission. I can't recall the exact model/year but there are some Subarus that cannot be flat towed because the front bumper is rated or towing. Not sure if this is the... view full answer...
Though Roadmaster has not yet come out with a baseplate setup for your 2023 Subaru Crosstrek we do have another available option for you.
The Blue Ox Base Plate Kit # BX3622 is confirmed to fit a 2023 Subaru Crosstrek with a manual transmission. It has a hidden design that provides a clean, seamless look. It has a durable steel construction and is powder coated to help resist rust and corrosion.
You can use you Roadmaster Falcon towbar with the Blue Ox baseplate when using The Adapter... view full answer...
After installing The Draw-Tite Trailer Hitch Receiver # 36644 onto your 2019 Subaru Crosstrek, the hitch has a tongue weight of 350 pounds. You're only as strong as your weakest component, so you would need to check your vehicle's manual to find the proper tongue weight recommendation for your vehicle.
To make your 1-1/4 inch hitch to a 2 inch hitch The Hitch Adapter # HTAD is needed. Using this adapter will cut the tongue weight in half so 350 pounds of tongue weight turns into 175 pounds... view full answer...
The correct Thule Aeroblade Edge Roof Rack kit for the 2017 Subaru Crosstrek Limited is the # TH7502-TH7502 for the aluminum/silver bars or the # TH7502B-TH7502B for the black bars. These bars are 32-3/4" long and are designed to fit on the raised side rails on your Crosstrek.
If your Crosstrek has the naked roof you'll need to use parts # TH7601-TH7602 and # THKIT3068 for an aluminum/silver bar or the # TH7601B-TH7602B and # THKIT3068 for black bars. The front bars on these kits are... view full answer...
If you're looking for a hitch that will install mostly hidden, you're looking for the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7365, which installs behind the bumper and has a removable receiver so that you won't even notice it's there when it's not in use. This hitch has a 2" hitch receiver that's perfect for carrying bike racks, and is a confirmed fit on your 2019 Subaru Crosstrek Hybrid.
If you don't already have a bike rack, the Swagman XTC2 Bike... view full answer...
The Replacement Lower Rubber Cover Strip for Thule WingBar Evo Crossbars # TH79VW is the correct part you would need for your Thule roof rack on your 2019 Subaru Crosstrek.
It wouldn't hurt to replace all 4 strips so you know they're all new and replaced but 3 would work just as fine. This rubber trim will work on all Thule WingBar Evo crossbars.
You will not have to trim it.
I attached a review video link below. view full answer...
With a 4 way flat already installed on your 2020 Subaru Crosstrek, you're well on your way and installing a 7 way is relatively easy. Since you're wanting to use the Curt Echo # C51180, I recommend using the # ETBC7L, which doesn't require a connection to a brake controller wire inside the vehicle's cabin.
To complete the install you'll need to run a 12 gauge wire, which is included (along with a circuit breaker), from the rear of the vehicle up to the battery; you'll want to run this... view full answer...
Go To Results