Yes, I confirmed with my contact at TruXedo that the Replacement TruXedo Shur-Bond Velcro Brand Fastener for 8' Beds # TX1117877 comes with 2 1-inch Velcro fasteners. view full answer...
It sure is!
The hardware included with the Curt Lunette Ring with 5-Position Adjustable Channel - 3" Diameter - 12,000 lbs # C48640 to secure the lunette ring to the channel are 5/8" Diameter x 5-1/2" long Grade 8 hex bolts with 5/8" grade 8 washers and 5/8" grade 8 nuts.
I included a video of the # C48640 for you to take a look at. view full answer...
Yes, the Dometic Part-Timer RV Toilet # DOM37FR comes with all of the mounting hardware including the lower seal (gasket) and bone tan caps. view full answer...
The Replacement Side Rail for the Pace Edwards SwitchBlade Hard Tonneau Cover # 311-SW5128 replaces just one side rail for your Pace Edwards SwitchBlade hard tonneau cover # 311-SWFA05A28. To replace both driver and passenger side rails you need to purchase two of the replacement side rail kits. view full answer...
The Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Black Wheel # AM31208HWTB that you referenced is sold individually. If you needed two of these you'd need to order a quantity of two. view full answer...
The Performance Tool Vehicle and Trailer Aligner part # PTW1276 comes with two telescoping magnet poles with foam balls. The foam balls can also be swapped out for the light heads. view full answer...
I just spoke with my manufacturer's representative, who tells me to get the bulb out, you hold the ceiling around the light with one hand while pulling directly down on the lamp. The springs are intentionally very stiff to hold the bulb in place. view full answer...
Yes, the Curt Trailer Hitch Receiver part # 13322 which is a fit for your 2002 Chevrolet Silverado does come with all of the mounting hardware that you need for installation. This hardware bag consists of carriage bolts, hex head bolts, flange nuts, and conical tooth washers. view full answer...
Yes! I went ahead and called my tech at Hollywood Racks, and he confirmed that the RV Rider # HLY64FR comes with 2 of the Small Wheel Hoop Adapters # HLY24FR (SW-ADP-U). view full answer...
Actually the Brake Install kit part # ETBC7 does not include a brake controller. It includes basically everything else you would need to install one on a vehicle that has a 4-way.
If you have a 4-way and a brake controller already all you would need is the # ETBC7 and you would get everything needed. If you still need a 4-way you would want the # C55504.
I attached an install video and instructions for the # ETBC7 for you to check out as well. view full answer...
The replacement Rain gutter tower # Y8810137 does not include the knob and screw. Yakima only makes them available in the hardware bag, # Y8810136, and not individually. The good news though is that with the hardware bag you will have some spare parts should you need them. view full answer...
Replacement End Cap for TracRac ladder racks # TA01-27023 does not come with the set screw. If the old screw is missing you would need to obtain one from a local hardware store. view full answer...
Thule Evo Clamp Foot Pack part # TH710501 on the Thule site does indeed show locks are NOT included but can be added. I also called Thule to confirm this is what they show. So, I went to our warehouse and checked several of these kits. Lock cores are NOT included but can be added using part # TH450400. view full answer...
The grommet for trailer marker light # 47-203668 is sold separately. It is # 221588. The same grommet also fits amber light # 47-203667. view full answer...
Yes, the K-Source Custom Towing Mirror Set # KS61183-84F is a pair of two mirrors that installs using the factory connections for electric, turn signal, and puddle lamp functions. It also uses the same mounting points as the factory mirrors.
Please note that your original stock mirrors must have all the same electrical functions as these mirrors. You cannot add functions not already supported by the stock equipment and wiring. view full answer...
A cut out template is not included with the Replacement Exterior Pop-Up Roof Vent # 9106.
So you will need to do some measuring before installation, and it will install in an opening of roughly 11-1/8" long x 5-1/2" wide. I have added a link below to a video review for you to check out as well if you'd like to take a look. view full answer...
The CIPA EVO Formance T5 LED Dashboard Bulbs - Cold Blue - Qty 5 # CM93253 are sold in packages of 5, so the price on the product page is for 5 of the bulbs. view full answer...
The etrailer brand # TJD-12000SP-F2 Ram Jack includes everything shown in the product photos, including the crank handle.
We take all our own product photos here, and unless the product description states 'Typical Photo', everything shown in any of our product photos is included with that part's purchase.
I've linked to a product description video featuring the jack. view full answer...
The Replacement Truxedo Shur-Bond Velcro Brand Fastener # TX1115173 that you referenced comes with a quantity of two 1-1/4 inch wide Velcro strips for you to use to replace both sides of your TruXedo Lo Pro QT cover. This comes with everything needed for both sides of your truck like you are interested in doing.
Each strip measures 8 feet long so you should have more than enough. view full answer...