For Curt trailer hitch # C12038 you will get the trailer hitch itself and the hardware needed to install it. The other parts you need depend on what you're going to use the htich for.
If you're going to be carrying a cargo carrier or bike rack you also need a support strap # 18050 per Curt's warranty.
If you plan on towing a trailer you need to add ball mount # C45503 along with the properly sized ball and the wiring. Those items are not included with the hitch. For a 1-7/8 inch ball... view full answer...
The fishwire tool does come with Curt Trailer Hitch, # 13147, for the 2009 Subaru Forester. Corrosion and rust is a possibility and one way to help prevent it from happening is to give the holes a shot of spray paint like you mention. I have included a link to the installation instructions for reference. view full answer...
The Stackers Leveling Blocks for Trailers and RVs - 1-3/8" x 8-1/8" - Qty 4 # A10-0916 weigh approximately 4 lbs or just under 1 lb each. I've attached a couple review videos of this product to assist. view full answer...
The Yakima RidgeBack bike carrier # Y02457 has a lock built into the anti-rattle knob. When the knob is tightened and then locked it cannot be take out of the hitch. I have included a link to a video review of this carrier for you. view full answer...
The Covercraft SeatSaver Custom Seat Covers # SS2481PCTP that you referenced comes in a quantity of 2 seat covers. They are confirmed to fit your 2016 Subaru Forester. view full answer...
All Konig tire chains come in a set of 2 so you will be able to install the Konig Self-Tensioning, Low-Pro Snow Tire Chains - Easy Fit CU9 # TH04115104 on either your front or rear tires. I recommend checking out your copy of the owner's manual for your vehicle to make sure you install and use these in accordance with what the vehicle manufacturer says to do. view full answer...
The Class III Curt Trailer Hitch Receiver, part # C13144, only comes with the hitch and the hardware needed to install on your 2016 Subaru Forester.
Per the instructions, Curt says the installation requires:
Die Grinder
Ratchet
10mm 3/4 inch Socket
6 inch Socket Extension
Phillips Head Screwdriver
Jack Stands, like part # PTW1605
Safety Glasses
The hitch comes with detailed instructions that also include pictures. I have attached an install video of this hitch being installed on a similar... view full answer...
The Aries Automotive Seat Defender Bucket Seat and Headrest Protector # AA3142G is just for one seat so if you're needing covers for both front seats you'll need to order 2 of these.
For a set of gray covers that are more of a custom fit we also have the Covercraft SeatSaver Custom Seat Covers # SS2406PCGY. view full answer...
The Curt Roof Mounted Cargo Basket # C18115 has u-bolt hardware that is 6mm by 1 inch threading according to my contact at Curt Tech. view full answer...
The Detail K2 4 bike rack you referenced, part # K2BCR490 includes anti rattle hitch bolts that are compatible with either a 2 inch or 1-1/4 inch hitch, so an additional anti-rattle hitch pin wouldn't be necessary. view full answer...
The size bolt lead that comes with the Draw Tite hitch part # 76271 is 7/16 inch so the correct part number you'd need for more would be the # C58410. view full answer...
Curt Trailer hitch # C12038 does not include lock washers. So it wasn't that you didn't get them it is that the hitch doesn't come with them. Using Loctite would be a great idea. Blue Loctite is should be all you need, # LT37614. Because the red Loctite is pretty much permanent. So should the hitch need to be removed for any reason, it would take pneumatic tools if you used red Loctite.
Also, make sure the bolts are torqued to the specifications in the instructions. If they are too loose... view full answer...
The Covercraft SeatSaver Custom Seat Covers, # SS2406PCGY, includes both the driver and passenger side covers. You do not have to purchase a driver and passenger side cover separately. I have also included a link to all of the custom fit seat covers for a 2009 Subaru Forester. view full answer...
The Swagman XC 2-Bike Rack for 1-1/4" and 2" Trailer Hitches # S64650 is a great platform bike option for your 2003 Subaru Forester, so long as it is already equipped with a trailer hitch receiver, like the Draw-Tite Trailer Hitch Receiver # 36311, designed to fit the frame of your Forester.
To use the bike rack, you do not need any extra parts. Everything you need to install it on a trailer hitch is included with part # S64650.
The only time you'll need to use a ball mount, is for trailer... view full answer...
The Tourney Transom Saver # 315-FXK comes with a 2 year manufacturer's limited warranty that will cover any breakage because of faulty craftsmanship. This particular unit is made from a high quality and high strength aluminum that helps resist corrosion, which would be a primary cause of most malfunctions. I'll also say that from what I was able to find, I haven't found any specific instances of this transom saver malfunctioning for any of our customers. For peace of mind, it might help... view full answer...