The Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" # C45785 does not come with a hitch pin. If you are in need of a hitch pin for the 1-1/4" end of the receiver, that is the # 5200. For the 2" receiver end, that is the # e98880. Both of these are locking pins in order to protect your adapter as well as your hitch-mounted accessories. view full answer...
The Curt 2-Inch Dual Receiver Adapter # D-192 that you referenced DOES include a hitch pin and clip along with the dual receiver. If you prefer to be able to lock this item in your 2-inch hitch you cold instead use a locking hitch pin such as # e98880 that we offer.
Please do note that ANY adapter will cut your hitch's rated tongue weight (TW) capacity by 50-percent. This is a result of the additional leverage such adapters place on the hitch tube. So for example, if your hitch's safety... view full answer...
Wiring harnesses are sold separately from the hitches. The Draw-Tite Class II Frame Trailer Hitch Receiver Hitch, part # 36297 does not come with the wiring harness. We do sell a hitch adapter that will convert a 1-1/4 inch hitch opening to a 2 inch hitch opening. It is the Hitch Adapter 1-1/4 inch to 2 inch Trailer Hitch Receiver, item # HTAD. However, using this adapter will decrease your tongue weight capacity by 50 percent. The tongue weight capacity of this Draw-Tite hitch is 300 pounds,... view full answer...
Yes, the adapter plates are included with the Curt RockerBall Shock Absorbing Gooseneck Hitch Ball # C67DR. They serve as an adapter if you're using the ball with a B&W gooseneck hitch. This ball is also compatible with Curt Double Lock and Double Lock EZr hitches. view full answer...
The Roadmaster High-Low Adapter # RM-070 does not come with a hitch pin and clip or lock. It is sold separately.
For a pin and clip, you can use part # PC3, or for a lock, we have part # RM-315 for a single lock, or part # RM-316 for a pair of locks. view full answer...
Curt Q20 5th Wheel Trailer Hitch # C16130 does indeed include the 4 pins and 4 clips to secure the hitch to the rails; in this case the X5 adapter. view full answer...
The Thule T2 Classic # TH9045 will fit 1-1/4 inch, Class I and Class II trailer hitch receivers. There isn't an adapter specifically designed to make it fit into 2 inch receiver hitches however you can use a universal adapter sleeve # HT02. view full answer...
The High/low adapter # RM-072-2 does not come with a hitch pin. It takes a 5/8 inch diameter pin or lock. For a regular pin and clip you can use # PC3. For a lock you can use # RM-316 which is a set of 2 that are keyed alike. view full answer...
The Stealth Hitches # SH98VR only comes with a 7 way trailer plug included but you can use a trailer with a 4 way plug with an adapter like the Adapter 7 Pole to 4 Pole with Tester and Cover # 47345. This would be the best solution and it comes with a tester included on the adapter so you'll always know that everything is functioning perfectly. view full answer...
Mounting hardware comes with the Bike Rack Adapter for Stromberg Carlson Hitch Mounted Cargo Carrier, item # CC-125, so you do not have to supply it on your own. It also includes two adjustable nylon straps to secure your bikes.
This unique item offers a cost-effective conversion of a hitch-mount cargo carrier like # CC-100 into a platform-style bike rack and still allows you to retain use of the cargo carrier when needed simply by undoing a few bits of hardware.
If you'd like to add... view full answer...
The Kuat Transfer 1 # KU64FR comes with the anti-rattle bolt and a cable lock. This way you gain a lock and keep your anti-rattle device.
The Kuat Transfer 1 fits your Highlander's 2 inch hitch out of the box with the included adapter. The below video is a great resource showing how the anti-rattle bolt can reduce hitch movement and rattle. view full answer...
I spoke with my contact at Curt and they told me that with the mid-year frame change on the 2013 Buick Lacrosse, they are including both brackets with the # C12115 hitch.
If you decide to order this hitch, when you receive it please check the box and it should have both brackets. If the correct bracket for your vehicle is not in the box, you can let me know, and I will contact Curt to have them send you the bracket you need for your vehicle. view full answer...
In order to have the pivoting mechanism with the Kuat Sherpa 2.0 # SH22G, you need to purchase the adapter separately. That is the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches # PVP20B (passenger's side) or # PVD20B (driver's side). view full answer...
Yes, the Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier # 310-VTG002 does come with the adapter shank for mounting it to a 2" trailer hitch receiver. I have highlighted the specific part in the attached picture and you can see it installed in the linked review video. view full answer...
The Reese Ram OEM Fifth Wheel Adapter, # RP30154, includes the feet that insert into the pucks (factory slots) in the bed of your 2013 Ram 3500. You will not need to purchase any additional items with this adapter if your truck has the Dodge Ram OEM Fifth Wheel Prep Package.
This adapter allows you to use a standard fifth wheel hitch that uses the industry standard above-bed base rails with your Dodge OEM Fifth Wheel package. view full answer...
The Curt # C13136 is a fit for your 2015 Audi Q5 as long as it is not the Hybrid. Gasket material like a silicone gasket maker, part # LT37464 can be used for the holes in the trunk pan when installing the hitch. Also, Curt requires the use of a safety strap like part # 18050 for any non-trailer items used with the hitch.
There are no adapters available to use on the # C18151 and allow it to fold up, and at 29-lbs is very light.
We do not have any t-slot adapters that will work with... view full answer...
Nothing else is required for your 1999 Ford F-350, and nothing further is needed to purchase - no adapter or supplemental equipment at all - in order to install the Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit # C60685.
The hitch is the complete kit, and will fit your '99 F-350 perfectly.
The only thing you may be interested in is a gooseneck wiring harness for your F-350 if you don't have one, the Curt 5th Wheel/Gooseneck Custom Wiring Harness with 7-Pole... view full answer...
Yes, if you do not have a ball mount that has the necessary attachment point for the sway control ball then you will need the Sway Control Adapter Bracket - 2 inch, part # RP26003.
Keep in mind that the plate is 3/8 inch thick and may require a hitch ball with a longer 1 inch shank. Also the platform the ball sits on, or face of the ball mount, should measure 2-1/2 inches. view full answer...