Yes, the 5th Airborne Sidewinder, part # RP61422 comes with a variable, universal wedge that fits Draw-Tite, Hidden Hitch, Reese, Husky, Owens, and Valley.
At the bottom of the product page, it shows how to orient the wedge depending on which model you have. Since you have a Reese, it will be either variation 1 or 2. view full answer...
The latch mechanism of the Gen-Y Pegasus Shock Absorbing Gooseneck Coupler # 325-GH-7007 that you referenced is the pin style and not the older auto-latch system that it used to have. view full answer...
The HappiJac Truck-Mounted Camper Tie-Downs # LC182908-182928 does come with the stabilizer bar. I've included a video showing the contents of this product so check that out! view full answer...
On the Putco PURE Premium LED Dome-Light Kit, part # P980015, for your 2010 Dodge Charger SXT, it has 2 bulbs that fit in front map lights and 2 bulbs that fit in the dome lights. The 578 bulb part number is the factory part number I show for both the map light and the dome light on a 2010 Dodge Charger.
The best way to verify the bulb size is check your owners manual or remove one of the bulbs from your vehicle and the part number will be stamped on the bulb. view full answer...
The Ultra-Fab Ultra Scissor Jacks # UF48-979031 that you referenced is a quantity of 2 of the Ultra-Fab Ultra Scissor Jack # UF48-979032.
So its the same jack, but one part number you get a pair of them and the other part number you get just one. view full answer...
You are correct; the Titan Chain Snow Tire Chains w/ Cams - Ladder Pattern - V-Bar Link - 1 Pair # TC2828CAM come with 2 chains, so one chain set for each tire on an axle. If you're going to put them on the front and rear axle of your 2019 Dodge Durango you would want to purchase 2 pairs. These are a great choice because they come with the cams included, and the V bar links will help break up ice and deep snow to provide great traction in the worst conditions.
I've linked a short review... view full answer...
On the replacement plastic dome assembly, # BVA0502-03, the foam gasket is included. I have included a picture showing it. The foam is not really a gasket, it is a strip of foam adhered to the dome. You can see in the picture where the two ends of the strip come together. The foam is not available by itself. view full answer...
Yes, 2 fishwire are included to help install the 1/2" bolts for the etrailer.com Trailer Hitch # E98845 on your 2016 Dodge Journey.
Attached is a sample installation video and the written instructions for you to check out. If you let me know what you will be using the trailer hitch for I can make additional recommendations if necessary. view full answer...
The Equal-i-zer Weight Distribution System # EQ64FR that we sell will come with the Equal-i-zer part numbers 90-00-1600(hitch) and 91-00-6160(ball). We have combined them to ensure that the correct weight ball is always used to match the hitch capacity.
A 1-7/8" 12pt Thin Walled Socket # ALL643216 is needed to install the 2-5/16" hitch ball that comes with the Equal-i-zer hitch system. view full answer...
The Curt 30K Gooseneck Hitch with Installation Kit # C640-635 is a complete goose neck hitch system that includes the frame brackets, hitch head and 2-5/16-inch hitch ball. It is a confirmed fit on your 1996 Ram.
For a wiring harness you can use # C56001. view full answer...
The Curt Trailer Hitch Receiver # C77VV does include two 9/16" fish wires to snake the bolts of the hitch through the frame of the vehicle for installation. view full answer...
The Dexter Trailer Hub and Drum Assembly # 84556UC3 is a single Hub and Drum assembly. We do not offer them sold in pairs, so you would need to purchase 2 individually if you're going to replace the parts on an entire axle. I've linked the installation video for this product to this answer.
You could also go with the # AKHD-550-35-K , which is a more economical Hub and Drum assembly. If you also need a brake recommendation for your trailer, the # AKEBRK-35L and # AKEBRK-35R is a great... view full answer...
The Westin Grate Step # 27-74735 requires mounting brackets depending on your model of vehicle. From the previous question you asked with us, it looks like you are asking for a 2500 model of 1998 Dodge Ram. If you have this model, I confirmed with Westin that the brackets you need are the Custom Installation Kit for Westin Molded, Sure-Grip, and Grate Step Running Boards # 27-1185. It is important to note that the Grate Step and the mounting brackets are only confirmed to fit Club Cab and... view full answer...
So the reason the part # D15660 is the most expensive is because it comes with everything needed to install as a engine oil cooler kit since it has multiple fittings as well as the sandwich adapter. This is basically the complete kit.
Next up is the # D15960 which setup to be a transmission cooler and comes with the fittings needed for this application which is considerably less than as an engine oil cooler.
Finally the # D15860 comes with minimal fittings and adapters and would require... view full answer...
The Roadmaster XL Base Plate Kit, item # 284-1, for the 2008 and 2009 Chrysler Town and Country and the 2008 and 2009 Dodge Grand Caravan comes complete with all installation hardware and the front arms that hook up to a tow bar for towing the vehicle.
Along with the base plate kit you may also need the following parts to complete your towing setup.
Tow Bar # RM-501 or # RM-520
Safety Cables # RM-645 or # RM-643
Tow Bar Wiring # 38955 or... view full answer...
The American Flag Color Emblem 2" Hitch Cover # AMG102202 does not have a light up feature. We do have other hitch covers that do light up which I have linked for you to filter through but none of them feature an American Flag. view full answer...
If you check out the picture I attached you will see that the switch you referenced is included with the Edge EZ part # EZD1000A for your 2001 Dodge Ram. You will also see brief explanations on each of the components that comes with the kit.
For more info check out the install instructions link I attached. view full answer...
The bolts that are used are Class 5 if they are Silver and Class 8 is they are a Gold color.
If you are looking for replacement hardware for your Curt # 14001 Trailer Hitch, you can use the Replacement Hardware Kit, part # RHK. All you need to do is type in your hitch number on the # RHK product page and we will send you the correct replacement hardware. view full answer...
The Curt A16 # C16521 fifth wheel hitch does come in two parts, a head unit which weighs 84 lbs and the base which weighs 109 lbs. So while these parts are not necessarily light, they are manageable and would allow you to remove each piece from your 2006 Ram individually. This is a quality hitch that has a 16,000 lb capacity, a color-coded indicator system so you know when you are ready to couple, uncouple, or tow, as well as an articulating head that will cut down on the amount of noise... view full answer...
The bolts that come with the EcoHitch part # 306-X7284 that you referenced are:
(2) 7/16”-14 x 1” Gr.5 Hex Cap Screw
(2) M8-1.25 Hex Nut
(5) M8-1.25 x 50mm Hex Cap Screw Fully Threaded view full answer...