Expert Answers about Nissan
- Hopkins Vehicle Wiring Harness For a 2019 Nissan Frontier
- On your 2019 Nissan Frontier that came with the factory harness, you will only need to plug in the Hopkins Plug-In Simple Vehicle Wiring Harness # HM43534 once. Then when you need to use the towing connections you will just plug into either the 4-way flat or 7-way blade connectors.
Some Dielectric Grease # 11755 is recommend on the connectors to protect against corrosion and other wiring issues.
view full answer... - Where Is the Serial Number on the Roadmaster EvenBrake Located?
- I checked the owner's manual and Roadmaster states the serial number for the Roadmaster Even Brake Portable Supplemental Braking System # RM-9400 is located on a label on the underside of the unit.
If you are needing a replacement part, let me know what you need or you can check out the Replacement Parts section on the product page.
view full answer... - Does Stallion 288-07411 Tire Grip Vehicle Traction Recovery Track Have Metal Studs on its Underside
- The Stallion Tire Grip recovery track, part # 288-07411-2 does feature metal studs on the underside that will help the mat grip the ground surface. You can get a better look at the mat by checking out the video I've linked for you.
view full answer... - Bike And Hitch Locks for RockyMounts RKY10223 WestSlope 3-Bike Rack
- The cable and hitch lock that's compatible with the RockyMounts # RKY10223 WestSlope bike rack are available separately as part # RKY10224.
The WestSlope bike rack is one of my favorite designs, primarily because the U-shaped rack allows you to step in closer to the rear of the vehicle which makes in easy to load the bikes that are closest to the vehicle.
I've linked to description videos for both the bike rack and the lock kit I recommended.
view full answer... - Trailer Wiring Harness For 2016 Nissan Frontier With Factory Tow Package
- Since all of the Frontiers include the wiring, they may not have the factory tow package on the vehicle. You can easily check this out two ways. Remove the passenger side kick panel and look to see if the harness with the relays is present. If not, then you will need to get a wiring harness like part # C56225. This kit includes the relays needed to activate the tow package on your Frontier. Another way to check is to find the gray connector with the cap on it that is located along the driver...
view full answer... - Can The Roadmaster Clevis Locks And Hitch Pin Lock Be Keyed Alike
- The hitch pin and clevis pin locks # RM-304 referred to in Brad's video for the RoadMaster Receiver Hitch Lock # RM-315 do not have a keyed alike option so you would have two keys, one for the clevis locks and one for the hitch pin lock. Out of the options we currently have the # RM-304 would be the best choice for your setup since it comes with two heavy-duty clevis locks keyed a like and a hitch pin lock all in one package.
view full answer... - How To Find Right Adjustable Ball Mount For Weight Distribution System
- It sounds like you need an adjustable shank for your weight distribution system. You want to tow your trailer as level as possible.
I have attached a link to the weight distribution adjustable shanks we offer. I also attached a link to a helpful article that explains how to choose the correct ball mount for your towing setup.
view full answer... - Will Hitch Installation on 2017 Nissan Rogue Affect Operation of Rear Hatch Lift Sensors
- Automated rear hatch opening systems on vehicles like your 2017 Nissan Rogue usually have multiple sensors at various points on the rear bumper cover. Hitch installation will often block the centrally-located sensor but usually does not affect those towards the outside edges of the bumper.
So if you were to install one of the available 2-inch Class III hitches like Draw-Tite # 75902 or Curt # C13204, or either of the 1-1/4-inch Class II models, # 36542 or # C12122, you will just need to...
view full answer... - Photo Of Fit Kit Clamps Appears To Be Shorter Than Clamps Used On Video Of 2016 Nissan Frontier
- I understand how the photos are a bit deceiving when looking at the brackets that are used to secure the roof rack to the door jambs. I have attached a couple of photos that show how the brackets look with the door on the vehicle open and also what it looks like when the door is closed. The clamps are actually shaped to fit the contour of the inside of the door jamb.
The Rhino-Rack 2500 Series Vortex roof rack is a nice aerodynamic roof rack. The c-channels on the crossbars help reduce...
view full answer... - Coolant Temperature When Using Kat's Circulating Heater # KH13080 in 2006 Nissan Frontier
- According to my contact at Kat's Heaters their Circulating Heater # KH13080 for your 2006 Nissan Frontier will operate continuously until your coolant reaches a temperature of at least 150 degrees Fahrenheit. This kit includes the requires mounting hardware.
view full answer... - Should the Prodigy P2 Brake Controller be Unplugged if it Will Not Be Used for 6 Months
- When the Prodigy P2 Brake Controller, # 90885, is plugged in on your 2012 Nissan Armada but is not being used, the electrical draw from the controller is a mere 3.6 milliamps so there really is no harm in leaving the unit plugged in.
If you would feel better unplugging the unit that way the LED display does not come on every time you start your vehicle, I recommend also removing the unit from it's mounting location. From past experience, if the unit is left in place but unplugged, some...
view full answer... - Adapting 7-Way Trailer Connector on 2012 Nissan Titan To 4-Pole Connector on Trailer
- Your Titan would've been factory equipped either with or without the 7-way trailer connector. If there's indeed a connector on the rear, it would be the 7-way.
There's a few ways you can go about doing this. The easiest option would be to adapt the 7-way to work with a 4-pole by using a plug-in adapter like part # PK12716.
You could also use the # C55515 that you referenced. You'd unplug the wiring harness from the rear of your 7-way, and plug the # C55515 inline with that connection....
view full answer... - Size of Shipping Box for Access Roll-UpTonneau Cover, Part # 834532006823, for 2012 Nissan Frontier
- The Access Roll-Up Tonneau Cover for the 2012 Nissan Frontier with Crew Cab and 5-foot bed, part # 834532006823, is packaged by the manufacturer in a carton that measures 8-1/2 x 5 x 79-1/2 inches.
A product of this size and shape is shipped as is, in the manufacturer packaging, unless additional packing were to be specifically requested by the customer. Shipping weight of this item is approximately 34 pounds.
view full answer... - Troubleshooting Tail Lights on 2007 Nissan Titan SE
- Some Nissan Titans and Armadas use a relay for the trailer running lights that's located under the dash to the left of the steering column. There should be slots for three blue relays, and if you're missing one, as shown in the photo, it would explain why the trailer running lights aren't working. We carry the relay in the Curt Relay Kit # C57000.
If it is the tail lights on your trailer that do not function, I suggest testing them directly first since this is easy to do and you do not...
view full answer... - Replacement 7 and 4-Pole Trailer Connector To Replace OEM Connector For 2014 Nissan Frontier
- The Pollak 7- and 4-Pole Trailer Connector Socket, part # HM40975 can be used as a replacement for the 7-way connector for your Frontier.
This connector plugs into the OEM wiring on your vehicle to give you a working 4-way and 7-way connector, and includes the mounting bracket.
view full answer... - How Can I Reduce Bouncing On A Bumper Pull Trailer
- There are a few things that can cause bounce with a bumper pull trailer. Generally, bias ply tires would not contribute to trailer bounce, unless they are excessively worn. Trailer bounce is can be caused by worn out suspension components. You will want to get under the trailer and give everything a good look-over.
You will want to check and make sure the trailer is completely level when towing.
If all of that checks out, it may be the case that you are just not towing enough weight...
view full answer... - Connecting Magnetic Tow Bar Lights With 4-Way to Motorhome With 7-Way
- We have some options for you to connect magnetic tow bar lights to a motorhome connector (which should be a standard RV 7-way), though there isn't an adapter to go from the 4-round on the Heavy Duty Magnetic Tow Light Set # 337TL257M.
While you could do some cutting and splicing to get it to work, the much easier option is to go with a magnetic light set with a 4-flat, the Roadmaster Standard Magnetic Tow Lights # RM-2120.
There is an adapter that will go from a 4-flat to a 7-way, so...
view full answer... - Amp Draw of Redarc Tow-Pro Liberty & Will Blue Light Shut Off
- Appreciate the purchase of the Redarc Tow-Pro Liberty Brake Controller # RED24FR, and that blue light does go off eventually - it will fade out after roughly 15 minutes. Keep in mind once you open the door the blue light will come back on, so it may not look like it is going out but take a gander in the window after 15 minutes and the light will be gone.
It does need to be disconnected from the trailer for this to happen though; if you leave the # RED24FR it will not go into sleep mode....
view full answer... - Bearing Buddy For 2003 Fleetwood Folding Trailer
- If the inside diameter of the hub bore on your trailer measures 1.98 inches then part # BB1980A-SS would be the Bearing Buddy you can use. You can use a digital caliper like part # PTW80157 to measure the inside bore of your trailer hub to make sure you get the correct parts.
I have attached a link to our product page for the Bearing Buddys we offer.
view full answer... - Is Relay Included With a Brake Controller for 2010 Nissan Pathfinder
- If you have a factory installed 7-way trailer connector, the relay you mentioned, part # V38937-1 should already be installed. All you will need is a Brake Controller and the wiring harness like the Tekonsha Prodigy P2 Proportional Brake Controller # 90885 with Nissan Adapter, # 3050-P. If by chance the relay is not installed on your Pathfinder, you would have to purchase that at your dealer.
If your Pathfinder is equipped with a 4-way connector, or if there is no trailer connector on...
view full answer...
Go To Results