The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7303 based on capacity is comparable to a class II hitch. It does have the 2 inch receiver for compatible accessories similar to the class III and higher hitches but the max tongue weight for this particular hitch is 300 lbs. It can use those larger accessories you will just be restricted to 300 lbs tongue weight. view full answer...
The Rola 59833 does not give a decibel increase when the rack is installed as that will change based on speed and change with the weather conditions.
Most roof rack systems will have a noticeable sound because you are changing the aerodynamics of your vehicle by adding the crossbars. The bulkier the system the more noise, so square bars and bulky towers will be the worst offenders. The Rola rack you asked about has very sleek lines with aero crossbars for a more factory appearance... view full answer...
You can find out if you have LEDs a couple of ways. The easiest is to remove the lens of the lights and if it has a bulb it is incandescent. If it has diodes then it is LED.
Another way is to turn the lights on and then watch as you turn them off. If the light go off abruptly, they are probably LED. If the filament takes a moment to go out then it is probably a bulb.
The third way is to contact your dealer with the VIN and they will be able to tell you what lights are on your Mazda 3. view full answer...
Yes, the Replacement Tensioning Bolt Plug for Thule Traverse Foot Pack # 8526446001 are designed to keep dirt and grime out of the socket used to tighten the feet. view full answer...
I spoke with Rhino-Rack about the Rhino-Rack 2 Bike Rack part # RRRBC045 and they informed me that this bike rack has not been updated since its release so I can confirm we have the most up to date version. The frame cradles which hold the bikes to the upright arms are cushioned and there is even anti-sway devices built-in. view full answer...
The Rhino Rack Vortex Aero Crossbars consisting of the crossbars and feet # RR54GR do have integrated locks to deter theft. The locks secure the crossbars to the roof and secure the channel-mounted carriers to the crossbars.
The Aero-type crossbars are the lowest profile roof rack for your 2011 Mazda 3 as each crossbar is only 1-1/16" tall which will cut down on wind noise from this rack.
I attached help articles on roof mounted cargo carriers, watersport carriers and ski carriers you... view full answer...
I checked with one of our shipping department folks, and found that the Draw-Tite Class I hitch, part # 24843 would ship in a box that measures 58 inches long by 8 inches wide, by 26 inches tall. This is a one-piece hitch, and the hitch, drawbar and the pin and clip would ship in a single box.
I have confirmed that the Draw-Tite Class I hitch is indeed a fit for your 2010 Mazdaspeed 3.
If you'll be towing with the hitch, you'll also need a # C59496 wiring harness, a # 3594 ball mount... view full answer...
Go To Results