Although the Sumo Springs # SSR-338-47 can help reduce body roll when the vehicle is under load, the primary benefit is to provide additional support to the rear suspension, and therefore help keep the vehicle level, prevent the rear of the vehicle from sagging and to keep the vehicle from bottoming out when under load. The springs will progressively adjust, as more weight is added, the springs become more stiff.
The Sumo Spring is meant to replace the factory bump stop, and the manufacturer... view full answer...
Since the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 is a universal part and not vehicle specific it is impossible to rate the amount of torsional force the tube would be capable of supporting without mounts. And as this is generally used on vehicles with much stronger rear suspension components than passenger vehicles they do not generally call for a weight distribution hitch to reduce rear sag. view full answer...
The Lippert Waste Master RV Sewer Hose # LC359724 is constructed with an exterior helical coil that lets it extend from its compressed length of 5-feet up to its 20-foot maximum length. The interior white surface of the 3-inch diameter hose is smooth, but if not extended fully the exterior coils will cause the interior to have small circular bumps. The linked photo will help you see what I refer to. The more extended the hose is, the smoother the interior surface will be. view full answer...
Go To Results