The etrailer.com Electric Trailer Brake Assembly - Right Hand # AKEBRK-35R referenced in your question does not contain asbestos in the brake pads (or anywhere else on the assembly). None of the etrailer.com electric brake assemblies contain asbestos.
If you also need the Left Hand assembly, you will just need part # AKEBRK-35L. view full answer...
I checked the material of the K-Source Replacement Side Mirror # KSH3661 in our warehouse. It has metal mounting brackets, arm, and hardware. The housing of the mirror itself is plastic but has the chrome finish to look like metal but resist corrosion. It has the same footprint and mounting points as the factory mirror on your 1993 Ford F-150 so it is an easy no-drill installation. view full answer...
STX is a appearance package which is an optional package on the Ford F-150. The STX is not a trim level, the STX can only be added to the XL trim level. According to my research the STX package started in 2003.
However, the K-Source Snap & Zap Custom Towing Mirrors # KS81800 are a confirmed fit for your 2006 Ford F-150. Snap these custom-fit towing mirrors over your vehicle's existing mirrors for an expanded field of vision. Built-in mounting clips grab the inside edges of your factory... view full answer...
My Westin representative tells me that their Fey Diamondstep Bumper you referenced, part # 21000-92230 is constructed of 12 gauge chrome plated steel. The bumper includes mounting brackets and hardware that are compatible with the 1973-1991 Chevy C/K series trucks, 1967-1997 Ford trucks and 1972-1993 Dodge trucks. view full answer...
The pictures you see of the screen door slider # LC234101 are taken with it over a white table. It isn't completely clear so slightly opaque would be a better description though it is listed as a clear slider.
Check out the video. It may make it more clear, pun intended. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75506 which is a fit for a 2007 Ford F-150 is made in Mexico. If you are looking for a USA option, the Curt Trailer Hitch Receiver part # C13360 is the way to go. If you need a trailer connector to go along with the trailer hitch, the Curt T-Connector Vehicle Wiring Harness part # C56031 is plug-n-play. view full answer...
The K-Source Snap & Zap Custom Towing Mirrors part # KS81850 which are a fit for a 2017 Ford F-150 are made in China. If you are looking for a made in USA option we have two, the CIPA Custom Towing Mirrors part # CM11550 and Longview Custom Towing Mirrors part # LVT-2300-C. view full answer...
The Optronics LED Trailer License Plate Light with Bracket # LPL56CB uses 20 gauge wire. This thin wire is all that is needed to power the led light as it only draws 0.045 amps at 12.8 volts. view full answer...
While the MaxxFan vent assemblies # MA00-06401K and # MA00-07500K are not made in the USA, the Ventline and Fantastic Vent assemblies are.
The Fan-Tastic Roof Vent # FV802250 (manual lift) and # FV807350 (powered lift) are both 14 x 14 inches and tinted with a 12v fan, just like the two MaxxFan assemblies you referenced.
We also offer similar Ventline products, including the E-Z Lift Roof Vent # V3094-603-00 (manual) and # V2119-603-00 (powered). Both of these vent assemblies are also... view full answer...
The Gorilla-Lift Replacement Roller Assembly, part # GMNR925, consists of two each of the rollers, pins and clips along with four washers. The rollers themselves are machined from a high-density hard thermoplastic compound similar to nylon. The dimensions of the rollers and other parts are noted on the photo provided. view full answer...
The Curt # C31083 weighs 47 lbs; it's country of origin is the United States of America. The Draw-Tite # 65067 weighs in at 37 pounds and is not made in the USA.
Each of these hitches are confirmed fits for your 2016 Ford F-150, and each has a 2 inch receiver capable of being used with a snowplow, winch, or other accessory. I've also added a photo showing what the Curt receiver looks like on a Ford truck. view full answer...
I have yet to hear of any problems with a Classic Accessories cover such as # 052963733631 causing any abrasions, marring, or damage in general to a trailer. This particular cover has air vents to reduce the amount of wind that can get trapped under the cover so the movement is somewhat restricted in that regard. The polypropylene construction will be gentle on your trailer body as well.
The only part of a cover that might cause abrasions would be the zippers. But they don't really have... view full answer...
The Titan Chain Alloy Snow Tire Chains # TC2219SCAM that you referenced are made of manganese nickel alloy which is incredibly strong. As long as you install these chains correctly, use them properly, and don't exceed their speed rating of 30 miles per hour you would not have to worry about them coming apart on you. We sell a lot of chains and haven't had any issues with these chains so I would recommend them for you.
I attached a review video for you to check out as well.
Lastly, you... view full answer...
The Lippert Components Standard Baggage Door Mounting Plate # LC227099 that you referenced is made of plastic. If you wanted a metal version you'd instead want the # 295-000016. view full answer...
The Curt D-ring, # J-705, is raw steel. It is not zinc plated or galvanized. It is meant to be welded onto another steel surface. Welding zinc or galvanized steel does have challenges and can produce toxic fumes so going with a raw steel component is the way to avoid that. view full answer...
The washer and nut included with the Brophy Hitch Ball, part # SC30-C are not stainless steel as the hitch ball is.
We do not offer a stainless hitch ball nut or washer. You may be able to find them at a local hardware store. The shank on this hitch ball is 1-inch diameter and the shank has fine threads(14 threads per inch). view full answer...
The Titan Chain Alloy Snow Tire Chains # TC2321 are made in China. If you're looking for a USA made tire chain you could use something like the pewag Tire Chains # PWE2228S. However, you will need to make sure these work with your current tire size and check your owner's manual for any other restrictions. Unlike the Titan Chain tire chains these are not class S compatible. view full answer...