I apologize that your bolts were missing. If you prefer I can have them shipped to you. The bolts that come with the Ultra-Fab # UF35-946403 hitch are 3/8" diameter X 16 coarse thread.
The bolts only hold the extension arms in place while being welded. After hitch has been welded on the bolts can be removed. view full answer...
The pairing button for the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF is on the bottom of the camera, under where the LED lights are. I have attached a photo for you to see. view full answer...
I definitely see what you're saying about the spacer, found as part # LC34UD, from the 2nd gen Correct Track LC407131.
With that being said, the Correct Track Trailer Alignment and Lift Kit # RR23QX has been safety tested and works just fine without that spacer. As long as you install the Correct Track according to the instructions you will be just fine.
If you really want those spacers in-between the hangers on your trailer then you can order some from the part above and install them... view full answer...
A typical RV air conditioner rooftop unit is going to have a wire harness that hangs down and plugs into a controller. Most of the time the controller is mounted to the air distribution box, in between it and the rooftop unit, but some times it gets mounted inside of the rooftop unit. If this is the case then you'll have to remove the controller and find a way to mount it to your air distribution box. You can typically find a couple of smaller mounting brackets at your local hardware store... view full answer...