Expert Answers about Honda Accord
- Removing A Rhino Rack Vortex Roof Rack From A 2003 Honda Accord
- Don't worry...I've got you covered. Your picture was a great help and I was able to pull up your order to confirm. You have a Rhino Rack Vortex, consisting of Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2, # RRVA118B-2, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4, # RRRLKVA, and Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK030.
I've attached the installation details of...
view full answer... - How To Install Aftermarket Transmission Cooler On Vehicle with ATF Warmer
- The ATF warmer will both bring transmission fluid up to temperature faster during startup and colder weather as well as reduce temperature when heat build-up occurs. This can sometimes contradict typical line testing results you'd be accustom to but a cooler such as the Derale Series 8000 Plate-Fin Transmission Cooler Kit part # D13502 will still need to be installed on the return line. It is best to use factory diagrams to identify the return line as opposed to testing by feel as you would...
view full answer... - Where Does a Tail Light Trailer Wiring Harness Install on a 2013 Honda Accord
- For a 2013 Honda Accord you should be using Curt wiring harness # C56011 or Tow Ready harness # 118420. I have included a link to the installation instructions for you to view. The connectors on the right side should be directly behind the trunk panels and trim that you have to pull out of the way just like on the drivers side.
The Curt harness # C55502 only goes up to the 2012 Honda Accord.
view full answer... - Does Draw-Tite Trailer Hitch Need Stabilizing Straps for a Bike Rack on a 2006 Honda Accord Coupe
- The Draw-Tite trailer hitch, # 24787, for your 2006 Honda Accord Coupe, does not require additional straps when using a non-trailer load such as a bike rack, but it is not a bad idea to add them for extra support and stabilization. You can use something as simple as a Bungee Cord, like # 3031DAT.
With a Class I trailer hitch like # 24787, you must choose the bike rack very carefully as the hitch only has a 200 pound tongue weight capacity. I recommend a light weight 2 bike rack like the...
view full answer... - Trailer Hitch and Wiring for 2016 Honda Accord Sedan Touring
- The Curt hitch part # C11496 is a fit for your 2016 Honda Accord Sedan Touring and would be a great option. I attached an install video for this for you to check out as well. Then for trailer wiring you'd want the # C56299.
Then for a ball mount you'd want the part # 3593 and hitch balls # 19256 for a 1-7/8 inch ball or # 19258 for a 2 inch ball.
view full answer... - Wiring Harness for a 1998 Honda Accord Activates the Brake Lights, Running Lights and Turn Signals
- The custom plug and tow wiring harness we offer for the 1998 Honda Accord does activate the brake lights as well as the running lights and turn signals on the trailer. The green and yellow wires carry both turn signal and brake light functions. It is always a good idea to apply a small amount of electric grease, like part # 11755, to all electrical connections to help prevent corrosion.
view full answer... - Wiring Harness for a 2004 Honda Accord Pulling a Boat Trailer
- A converter for your vehicle will have 5 wires. Red - brake light, yellow - left turn, green - right turn, brown - tail/running light, and white is a ground. As far as what color wires you need to match to in your Accord, you will need to use a circuit tester, like part # PTW2993, and test the wires in the trunk. Pull back the liner from the driver side, behind the taillight and the fender, and look for the taillight wire bundles.
We have a custom fit trailer harness for your 2004 Honda...
view full answer... - Where are the Attachement Points for Curt Trailer Hitch # C11290 on a 2003 Honda Accord
- The furthest two attachment points for the cross tubing on Curt Hitch, # C11290, are in the trunk pan (where the spare tire sits) and not the frame. The attachment point for the bracket nearest the receiver opening is a tow hook near the center of the rear end of the 2003 Honda Accord. I have included a link to the installation details for this hitch below.
view full answer... - How Many Straps Do I Need to Secure My Yakima Big Horn to My 1993 Honda Accord
- You would only need one Curt Bike Rack Strap with Cambuckle, part # 18050, on your 1993 Honda Accord Wagon, the main purpose of the strap is to prevent vertical jarring on the hitch and frame of your vehicle that might cause premature damage.
The strap hook will attach at the top of the hatch of your Accord, if you check out the picture to the right you can see exactly what I mean.
view full answer... - Will the Cat Back Exhaust System for the 2000 Honda Accord Pass Emissions
- The MagnaFlow Stainless Steel Cat-Back Exhaust System - Gas, item # MF15690, for the 1998 - 2000 Honda Accord L4 2.3L Sedan will pass emissions testing as long as the vehicle it is installed on is in proper running condition to pass the emissions testing for the state you live in.
Emissions are improved by the catalytic converter and systems on the engine of the vehicle.
The Cat-Back Exhaust System will in no way improve emissions of the vehicle.
view full answer... - Is Heat Shield Trimming Required to Install the Curt Hitch part # C11681 on a 2015 Honda Accord
- To install a hitch like the Curt Hitch part # C11681 that you referenced on your 2015 Honda Accord you will need to trim the heat shield. For more info on that check out the install video and installation instructions I attached.
view full answer... - Trunk vs. Hitch Carrier for Transporting 2 Heavyweight Beach Cruisers on 2013 Honda Accord
- No trunk-mount bike rack, including the excellent Thule OutWay 3-Bike Rack # TH56BV, allows you to open the vehicle trunk while the rack is installed. The reasons are that the attachment hooks may bind in the gap between the trunk lid and the vehicle body, potentially distorting one or both; and that the hinge that supports the trunk lid is designed to bear only the weight of the lid itself, not that plus the additional 19-lbs from the bike rack.
For instances where you need to maintain...
view full answer... - Does Curt Vehicle WIring Harness For Trailer Connection Power Line Fuse Effect Vehicle Lights?
- If the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56299 has a blown fuse on the power line, it will not allow the trailer lights to function as it is protecting the module, but it will not impact your vehicle tail lights if that fuse were to blow because it is on a different power supply and fuse from the manufacturer wiring.
view full answer... - 2020 Accord 4dr Sedan Inno Rack Bar Spread
- The 2020 Honda Accord Roof Rack by Inno has a bar spread of 26 1/4". It consists of the following;
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127, the
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4, part # INSUT, and the
Custom Fit Kit for INSU-K5 Roof Rack Feet K710, part # IN95FR.
This roof rack has a weight limit of 120lbs. With the square crossbars you can attach any accessories that clamp to crossbars. This rack has locking torque knobs that...
view full answer... - Towing Lights for Towing Honda Accord Behind Motorhome
- There are a few different methods for setting your Accord up for towing behind your motorhome.
You can choose the magnetic tow lights, like part # RM-2120. These systems are extremely easy to install, and do not require altering the electrical system on the tow vehicle. This would be the ideal option for infrequent towing.
Another option would be the Roadmaster Tail Light Wiring Kit, part # RM-155. This system uses bulbs that are permanently installed in your vehicles tail light assemblies....
view full answer... - Wiring Hot Lead on 2013 Honda Accord
- To route the black hot lead wire on the wiring harness with 4-pole flat trailer connector, part # C56173, which you reference, on your 2013 Honda Accord you will want to either route the black wire through a grommet and along the exterior frame or follow the existing wiring along the thresholds into the engine compartment up to the battery avoiding areas that may pinch or break the wire.
I have included a link to the installation instructions.
view full answer... - Roof Bike Rack to Fit T-Slot Channel in Rhino-Rack Vortex Aero Crossbars
- RockyMounts' JetLine Fork Roof Mounted Bike Carrier # RKY1320 mounts on any round and square crossbars and also has the ability to install in the T-slot track on top of a roof rack crossbar such as the Rhino-Rack Vortex aero-style bars like # RRRS143.
We do offer a replacement Vortex Strip # RRM626 for the Vortex rack bars.
view full answer... - Installing Blue Ox Tail Light Wiring Kit with Block Diode on Towed Vehicle
- You are on the right track! When installing the Blue Ox Trail LIght Wiring Kit # BX8811, you will essentially have wires coming into the block diode from the RV and in from the vehicle. Then the wires coming out will go to the vehicle's rear tail lights.
I have attached the complete installation instructions for the Blue Ox Trail Light Wiring Kit for you to take a look at. This will give you much more detailed installation steps than the diagram you are referring to. As you mentioned,...
view full answer... - Tips for Difficult to See Furrion Vision S Screen of Monitor
- If the Furrion Vision S system part # FCE48TASL-05 that you referenced has to compete with the brightness of a sunny day it's going to be more challenging to see the screen, so yes, a sunscreen would help as it would make the brightness of the display stand out more. Since we don't carry a sunscreen for it you could try to get creative and fabricate one or if you could move the display into an area with less sunlight that would work too.
view full answer... - Can Any Mechanic Install a Curt Trailer Hitch
- The Curt Trailer Hitch Receivers like part # C11681 which is a fit for a 2013 Honda Accord are designed so that anyone can install it. It requires almost no prior mechanical knowledge nor do you really need any special tools in most cases. The professional installation time is listed at 30 minutes whereas the novice install time is listed at 60 minutes for this particular application so it is definitely one of the easier ones to install.
In regards to the fishwire technique, most have...
view full answer...
Go To Results