If you look behind the bumper below the driver side tail light and find a triangular plug that is not connected to anything on your 2007 Buick Rendezvous, then you can use the Hopkins Custom Fit Vehicle Wiring, # 41405.I have included a link to the installation details for reference.
If the plug is not there, you will need to use Tow Ready Custom Fit Vehicle Wiring, # 118383. This harness connects behind each of the tail lights. I have included a link to the installation details for this... view full answer...
The best spot to install the transmission cooler is in front of the radiator, where it will get maximum air flow. If necessary it can be mounted behind the radiator, if there is sufficient clearance for installation.
Installing the cooler in front of your radiator would almost certainly involve removing the grille and possibly the front fascia under the bumper to improve access.
We have an installation video showing a cooler being installed on a different vehicle, watching the video... view full answer...
There are detailed instructions and photos in the manufacturer instructions, see link, that lead you to the location for the trailer wiring harness connections on the 2004 Buick Rendezvous. You will be routing the wires to the back of each tail light and plugging the connectors from the T-One Wiring Harness, item # 118383, inline with the factory connectors that plug into the vehicle tail lights. view full answer...
You will need to test the wires to determine which is the correct one for the red wire on a brake controller. Use a circuit tester like # PTW2993 if you do not already have one. Test the wires until you find the one that shows power only with the brake pedal. If you find a wire you think is correct, but it also shows power if the head lights or turn signals are on then it is not the correct wire. view full answer...
Installation of a brake controller on your 2007 FJ Cruiser will require hard wiring with a Brake Controller 7- & 4-Way Installation Kit, item # ETBC7. We have detailed instructions, see link, and a video installation, see links, of this kit and a brake controller being installed on a 2008 FJ Cruiser for you to review.
If your FJ does not have a 4-Way trailer connector installed you will also need to install a T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, item # 118405, prior... view full answer...
The 2003 Buick Rendezvous can be flat towed without damaging the automatic transmission by installing a transmission lube pump. I do not sell any lube pumps. You should also consult the vehicles owners manual to determine if there are any specific requirements to tow your vehicle.
The automatic transmission would need to be in neutral while flat towing the Buick and the ignition key will be turned to the unlocked position to release the steering wheel lock on the vehicle.
Roadmaster has... view full answer...
Go To Results