While the Brophy Clamp On Camper Tie-Downs, # HSBP are not confirmed to fit the Toyota Tacoma due to the construction/material of truck bed, we do have an option that works for most slide-in truck campers. I suggest the TorkLift Custom Frame-Mounted Camper Tie-Downs, for a 2019 year model, use:
- Front Tie-Down, # TLT2303
- Rear, Tie Down, # TLT3307
This frame-mounted design ensures excellent handling in securing the truck camper to truck's base instead of its bed; this better distributes... view full answer...
Both the Erickson Tie Down Anchors, part # EM01003 and the Putco Push-Up Tie-Downs, part # P99901, are not designed to be used to hold down campers. The capacity of the Erickson Tie Down Anchors, part # EM01003, is 1,000 lbs.
For a camper tie downs, I would recommend using the Brophy Camper Tie Down, part # HSSF. These camper tie downs are made to be used with the bigger size campers and do not have a capacity. If you have a slide-in bedliner, you will have to trim it or remove it to use... view full answer...
The Brophy Clamp On Camper Tie-Downs # HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle the actual camper load with the tie downs there to secure the camper in your truck bed. You will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to secure the camper to the tie downs, the # TDHP do have a 3,000 lb. capacity.
To answer your second question, yes the tie downs are specific to your truck. The Brophy... view full answer...
Yes, the stake pocket camper tie downs, # TDSF, will work on the 2006 Dodge Ram 2500, as long as the overall length of the camper you are using them with is 8 feet long or less, this measurement includes the overhang over the cab of the truck.
You will need to drill one 11/32 inch hole and two 7/32 inch holes for this installation, and there are spacer tabs on the tie downs that may need to be pried off for a proper fit in your stake pockets.
If your truck campers overall length is longer... view full answer...
HappiJac truck-mounted camper tie-downs are brand and model specific so if you pulled one out of a Ford then it would not be compatible with your 2006 Dodge Ram. You would need the HappiJac Truck-Mounted Camper Tie-Downs # LC182908-182928.
If you also need turnbuckles then I recommend the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs # LC182895. The built-in levers on these turnbuckles allow you to quickly and easily secure your truck bed camper to your tie-down system. view full answer...
The Camper Tie Downs, # TDSF, are a universal item made for full size trucks so they would most likely fit your 1996 Dodge Ram. They will also fit any camper that is a fit for your truck. The Camper Tie Down hardware Package, # TDHP, is the correct hardware for the tie downs. view full answer...
It is a smart idea to verify the right tie-downs because there are so many options, and we do have the correct ones for your 2009 Chevy Silverado 2500 Regular Cab with an 8 foot bed and factory hitch. The only thing that will matter apart from those things is if you have running boards that go all the way underneath your truck bed, or a step underneath your truck bed.
That will affect which front tie-down you need, though the rear tie-down will be the same no matter what. The correct... view full answer...
The Stake Pocket Camper Tie Downs, # TDSF, would be a good choice for your 2004 F-150 with 6.5 ft. Short bed, as long as your camper is not over 8 feet long.
A better option, or if your truck camper is longer than 8 feet, would be to use the over the rail Camper Hold Downs, # HSSF. I installed a set of these and took some photos showing how they mount and how the pressure is applied when attached with the Camper Tie Down Hardware, # TDHP.
For the ultimate tie down performance, frame mounted... view full answer...
I spoke with my contact at Brophy and they told me that since 1988, GM has recommended not using the stake-pocket camper tie-downs on their trucks, which would include your 2000 GMC Sierra 1500. It is not a matter of them not fitting, but per the truck manufacturer, I cannot recommend them.
I do recommend using the Brophy Heavy Duty Tie-Downs, part # HSSF. These clamp to the inside of the truck bed and do not require any drilling for installation. I have attached a product review for... view full answer...
For your 2001 GMC Sierra 1500 with a 6.5' bed and factory hitch we have a few options. You could use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2205 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3205 as long as you don't have a running board or step under the underneath the bed of the truck. If you do then you'll want # TLC4203 and # TLC3205 instead. The inserts of these tie-downs slide into frame-mounted brackets for use and easily remove for a clean,... view full answer...
The manufacturer, C.R. Brophy, only tested the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF on full-sized American made trucks so we do not have a confirmation that they will work. There is also the stipulation that they'll only work with a truck bed camper with a total length up to 8', so I don't believe these would be the best option for your Tundra.
Instead I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2301 with the TorkLift Custom Frame-Mounted... view full answer...
I do have an option for you but TorkLift only makes camper tie downs for 2012 Dodge Ram Quad Cab. If your truck is a regular cab you need a universal set of tie downs. I recommend Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel part # HSSF. These tie-downs clamp onto your truck's bed rails and provide attachment points for the camper. They fit most full-size, non-dually pickup trucks that bed rails do not exceed 5-1/2" wide.
You will also need Brophy Basic Turnbuckles... view full answer...
The best truck bed camper tie down option we have for you is one that mounts to the vehicle's frame. In order to recommend a frame mounted camper tie down option for you I would need to know the bed size, cab type, whether or not you have step boards and what type of hitch you have installed. Once provided I can then offer you my recommendation. In order to secure your truck bed camper to the frame mounted tie downs, I recommend using the TorkLift Locking FastGun Turnbuckles for Frame-Mounted... view full answer...
I do have a truck bed camper tie-down option for a 2018 Ford F-150 but HappiJac does not offer the HappiJac Truck-Mounted Camper Tie-Downs for this vehicle. Instead, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs which are actually drill-free options unlike the HappiJac Truck-Mounted Camper Tie-Downs. That said, I need to know the bed length and board/step option to confirm fit, the part # TLF2018 for front and part #TLF3007 for rear are for models with 6.5' bed, and no... view full answer...
Yes, the # TSDF Brophy camper tie downs are a universal fit for full-size trucks and they will work on a 2005 Ford F-350 dually. The tie downs themselves have no specific weight rating, but the hardware kit for the tie downs, part # TDHP, is rated for campers up to 3000lbs. view full answer...
For your 2007 Dodge Ram 3500 Dually with an 8' bed I recommend the HappiJac Truck-Mounted Camper Tie-Downs # LC182908-182928 you were already looking at along with some turnbuckles like the # LC182898.
These camper tie-downs permanently mount to your truck's body to distribute the weight of your camper and limit movement in all directions. The low-profile attachment points are discrete and rear anchors remove for a clean look. These stainless steel turnbuckles allow you to firmly secure... view full answer...
The Brophy Camper Tie Downs, part # TDSF are a universal application for full-size trucks and they will fit a Ford F-250 Super Duty. The hardware to mount the tie downs to the vehicle is included.
I would also recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down. The tie downs wrap around the bed, not in the stake pockets, and are mounted inside the bed. They will not work with a slide-in bed liner.
There is no weight capacity rating on the camper tie... view full answer...
I do have both front and rear camper tie downs that are a confirmed fit for your 2017 Nissan Titan XD. The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLN2410 is for the front and the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLN3404 is for the rear.
However, you will need to remove your wheel to wheel running boards in order to install the rear frame mounted camper tie downs. None of TorkLift's frame mounted camper tie downs are designed to be used with wheel to... view full answer...
The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2010 Ford F-150.
The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are mounted... view full answer...
The Brophy Camper Tie Downs, part # TDSF, that you have referenced can be used on campers that are up to 8 feet in length. There is no weight capacity rating on the camper tie downs and they will work on your 1999 Ford F-350 Super Duty Dually with a properly sized camper for your vehicle which is less than 8 foot in length.
The Brophy # TDSF tie downs are a universal application for full-size trucks.These tie downs come with hardware to mount them to your truck, but you will also need... view full answer...
Go To Results