Yes, the Mighty Cord RV Power Cord # A10-3025EDBK is compatible with the Mighty Cord Replacement RV Power Inlet in White # A10-30INVP or Black # A10-30INBKVP. view full answer...
We do indeed have SmartPlug 50 amp inlets and outlets; you can even choose from your choice of color:
- White: SmartPlug RV Power Inlet and Connector - 50 Amp # SM46FR
- Gray: SmartPlug RV Power Inlet and Connector - 50 Amp # SM66FR
- Stainless Steel: SmartPlug RV Power Inlet and Connector - 50 Amp # SM96FR view full answer...
Yes, the Mighty Cord Replacement Twist Lock Connector for RVs part # A10-50FDT is compatible with the Mighty Cord Replacement RV Power Inlet part # A10-50INBKVP. If you want to upgrade, I recommend the SmartPlug RV Power Inlet and Connector part # SM66FR which has much tighter contacts than the above therefore the risk of heat buildup is greatly diminished. view full answer...
The Furrion Replacement RV Power Inlet # 431861 was designed to be wired into a 30 amp RV and attach to a 30 amp female twist lock plug so yes you will be able to remove your current 30 amp pull cord and install this power inlet in its place. You could wire the Furrion Connector for RV Power Cord # F30FMPSY to the end of the power cord you remove from the camper and still use the cord with this new twist lock power inlet. view full answer...
The Epicord 30 Amp Twist Lock Power Inlet - White # 277-000137 is a great way to have a clean connection from your RV to your shore power or generator. This power inlet will work with any 30 amp 3 prong twist lock female connector. I've linked options for you but recommend the Furrion RV Power Cord with Handle - 30 Amp Male to Twist Lock Female Connector - 36' Long # F3OR36SBOEM to ensure you get enough cable length and also give you the nice angled connector that is easy to use.
I've... view full answer...
The SmartPlug RV Power Inlet # SM37FR that you referenced is a 30 amp power inlet designed for 110 voltage like you also mentioned. view full answer...
The Furrion Marine Power Cord Adapter # FP5515SY will unfortunately not work with the Furrion Replacement RV Power Inlet # F30ITSSS, however I do have another option.
Instead, I recommend using the Mighty Cord RV Power Cord Adapter # A10-1530DBK.
This adapter has a 30A female twist-lock connector on one end so you can connect to the Furrion Inlet # F30ITSSS, and a 15A standard straight blade end on the other side. view full answer...
The Reliance PB-50 power inlet is rated for 50-amp service so the female connector on Mighty Cord RV Power Cord - 50 Amps - 36' Long Item # A10-5036EDBK will mate with it perfectly. view full answer...
No, the Epicord 30 Amp Twist Lock Power Inlet # 277-000137 uses a standard twist lock power inlet so you can use other power cords.
We do have adapters that go from a 15-amp male power plug from your RV to a 30-amp receptacle. I recommend using the Camco Power Grip RV Power Cord Adapter # CAM55155 because it has a nice, bright-yellow color for easy visibility at night and a built-in handle on the male end which makes unplugging very easy.
If instead you are looking for the 30-amp side... view full answer...
The 30A female plug that's compatible with the # A10-30INBKVP Mighty Cord 30A RV power inlet would be part # A10-30FDT. The plug is a twist-lock that provides a secure connection that won't accidently become unplugged. The plug features a slide-off cover for easy access to the wiring terminals. view full answer...
The Mighty Cord Replacement Twist Lock Connector for RVs - Female - 50 Amps # A10-50FDT will work with a Furrion outlet as long as it is 3 prong 50 amp. You can use Furrion 50 Amp RV Power Inlet - 125V/250V - LED # F52INSBS for this. view full answer...
With the size of your trailer and you stating you only have three wires running to the power inlet you most likely have 30 amp service and would definitely be able to swap out the inlet with the SmartPlug RV Power Inlet and Connector # SM27FR. I've installed a few of these and have run into some issues with the cutout holes in the past and had to get a bit creative. Some times you just have to trim a bit more out for it to fit and some times the previous inlet was a bit wider and you'll... view full answer...
As far as the inlet plug you need to run your air conditioner unit, you will first need to install the Epicord 30 Amp Twist Lock Power Inlet - Black # 277-000138. Once the inlet is installed, you will be able to use a 30-amp plug like the Mighty Cord RV Power Cord - 30 Amps - 25' Long # A10-3025ED. You will then be able to connect those components to a 30-amp shore power source.
I went ahead and attached a video of the installation of the inlet if you need help. view full answer...
The mounting flange of the SmartPlug RV Power Inlet # SM97FR is flat which means it was designed to mount to a flat surface. To accommodate the roundness of where you plan to mount this you could use washers to take up the extra space. view full answer...
Yes, you do have the right adapter for the Epicord 50 Amp Twist Lock Power Inlet # 277-000139.
To plug into the inlet and parallel kit you can absolutely use the Mighty Cord 90-Degree RV Power Cord Adapter - 50 Amp Twist Lock Female to 50 Amp Male # A10-5050D90VP. view full answer...
If you're only wanting to setup AC service in your enclosed trailer then you could choose pretty much any 30 or 50 amp power inlet you wanted and then just run the appropriate gauge wire between the inlet and your panel. You can definitely install a 50 amp inlet and then just use a 50 amp to 30 amp adapter whenever you're at a site with only 30 amp service.
You could use the Mighty Cord Replacement RV Power Inlet - White # A10-50INVP or # A10-50INBKVP for black. You'd need a minimum of... view full answer...
The SmartPlug RV Power Inlet # SM97FR would be wired to the trailer and would be paired with a SmartPlug power cord, like part # SM59FR, that has a matching connection for the inlet and a standard 30 amp connector on the other end to connect to the shore power pedestal. view full answer...
The SmartPlug RV Power Inlet and Connector # SM77FR is designed to fit standard flanges so you can use your existing screws and holes. The mounting plate typically covers the old hole despite the different shape, no adapter plate is available. It measures 3.25" wide x 4.5" tall if you want to measure to be sure. view full answer...
Yes, the Mighty Cord Replacement Twist Lock Connector for RVs part # A10-30FDT is compatible with the Furrion Replacement Power Inlet part # 431861.
I'm not sure what weather cover you're referring to but that's the downside of simply replacing the connector and not the entire power cord, you're going to loose some weatherproofing since the end is no longer sealed properly. That said, there is a clamp that will attach to the wire jacket but it's still not perfect. If you want perfect... view full answer...