The etrailer brand # e93ZR Class III hitch fits all models of the 2021 Nissan Rogue, so it'll work great with your Platinum model.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like part # TK76FR, a ball mount like part # D-28 and a hitch pin, part # PC3 and a trailer ball. For a 1-7/8 inch ball, use # 19260 or # 63845 for a 2 inch ball.
I've linked to the installation instructions for the hitch and the wiring harness I recommended. view full answer...
With the etrailer Trailer Hitch Receiver # e98846 installed on a 2014 Nissan Rogue in our shop we measured the hitch pin at 4-1/2" from the bumper fascia.
I recommend the Thule Hitching Post Pro # TH934XTR for your Rogue. It has a hitch pin to upright bar measurement of 13-1/2". That will give you 9" of clearance to the bumper. It will carry up to 4 bikes weighing up to 35lbs each. The bikes will have 3 points of contact to secure them in place and prevent the bikes from rattling into... view full answer...
The 1-1/4-inch Class II trailer hitch # 36542 is a confirmed bolt-on, no-drill installation on your 2016 Nissan Rogue. I linked our install video. The Thule Camber 2 Bike Rack # TH9058 will work fine in this hitch, but for the best safety margin I suggest that instead you install a 2-inch Class III hitch # 75902. This offers 50-lbs more tongue weight capacity (downward force on the hitch) and it only costs a few dollars more. Installation will be virtually identical for the two hitches... view full answer...
The Sport versions of the 2018 Nissan Rogue actually require a different hitch fit. Instead you'd need the part # 76177 which does accommodate the frame differences you mentioned. view full answer...
The Curt Trailer Hitch Receiver # C13902 is a multi fit hitch that is not designed for one particular vehicle but will fit on several models with some drilling. This particular hitch is for Chevrolet, Ford and Dodge Trucks.
I recommend the etrailer Trailer Hitch Receiver # e98846 for your 2016 Nissan Rogue. This hitch is custom fit to bolt to into the factory weld nuts that are on your Rogue. This hitch is rated for 525lbs of tongue weight and 3,500lbs or trailer weight. Be sure to check... view full answer...
We confirmed with the manufacturer that the hitch # e98846 does fit all models of the 2008 Nissan Rogue including the S model like you have so it would work well for you. view full answer...
I checked with Yakima and found that the LoadWarrior cargo basket # Y07070 will fit the factory roof rack and crossbars on a 2016 Nissan Rogue. If your Rogue does not have factory crossbars that run side to side you would first need some to be able to mount the basket.
If your 2016 Rogue has the factory side rails that run front to back you can add crossbars using SportRack roof rack # SR1098. This is a low cost option that will work great for this application.
If your Rogue does not... view full answer...
Yes, the Thule Passage trunk mount carrier, # TH910XT, will fit the 2004 to present Mazda 3 sedans. I have included a link to a video review of this carrier for you.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry those bikes more level and will provide better ground clearance. I have to use these adapters and without them my wife's... view full answer...
Yes, the Hollywood Over-the-Top # HRF2 will fit your 2013 Nissan Rogue with a rear spoiler.
If you plan on carrying any woman's, children's, alternative frame bikes that lack a horizontal top frame tube. I recommend getting an adapter bar like # HRBA-PRO because it's easier for the rack to grab the bike. As a result, providing level transport of your bikes.
Take a look at the installation videos, informative article, and picture showing the # HRF2 on a 2013 Rogue. view full answer...
Installing pretty much anything in the hitch on your 2018 Nissan Rogue (or any vehicle with a backup camera for that matter) will obscure the camera to a certain extent. Depending on the cargo you may be able to retain more visibility, but it's just not always possible.
If you plan on using the Yakima BackSwing # Y02483 then it would be good to use a stationary cargo carrier like the Reese # 63153 so that everything sits a bit more solid in the hitch receiver.
You may also consider looking... view full answer...
According to Firestone, the fit of their Coil-Rite air spring kit, part # F4175 has not yet been determined for the 2016 Rogue. If you could measure the inside diameter and height of your rear coil springs and reply to me with those dimensions, Firestone can determine if the # F4175 will fit.
To install a roof mounted cargo box, you'd first need a roof rack. Rhino-Rack offers an aerodynamic yet reasonably priced option that would consist of the following parts:
49 inch Vortex Aero crossbar... view full answer...
Yes, the etrailer Trailer Hitch Receiver item # e98846 fits all models of the 2019 Nissan Rogue including the special edition. This hitch is custom fit and bolts directly to your frame with included hardware. It installs in preexisting holes and does not require any drilling or welding. I have linked an installation video and attached a picture below so you can follow along with the process and see the final product.
If you need a wiring harness to control your trailer or accessories... view full answer...
With using the Malone SteelTop Roof Rack # MPG202 on your 2010 Nissan Rogue with raised rails, manufacturers do not recommend opening the sunroof with a crossbars and a basket installed. This is mainly due to the fact that there will be increased wind noise in the vehicle. However, other than the noise, there won't be any other issues. i went ahead and attached a video that we did of the rack used on a 2011 Nissan Rogue. The fitment on your 2010 model is nearly identical.
If you are looking... view full answer...
The Malone AirFlow2 Roof Rack # MPG215 is a great solution for carrying a Thule roof cargo box with your 2015 Nissan Rogue.
Out of the linked selection I really like the Thule Force XT L Rooftop Cargo Box # TH6357B because it has the standard 16 cu ft cargo carrying capacity and it has the sleek Black AeroSkin finish that resembles the black trim on newer vehicles so it does a great job at matching the style and design of your Rogue.
Attached are review videos for both the roof rack and... view full answer...
When the Curt Folding Cargo Carrier part # C18151 is folded up, the shank measures 7-1/2 inches from the hitch pin hole to the closest portion of the basket.
To determine if it will fit your Rogue when it is folded, you will have to measure the distance from the hitch pin hole in the receiver to the point of the bumper that is furthest to the rear. If this measurement is less than 7-1/2 inches, the Curt Cargo Carrier will work great for you.
If you should find that the Curt Carrier will... view full answer...
I would be happy to help you and make a specific recommendation. For your 2022 Nissan Rogue we do have a few options but you are going to want to go with a 2" receiver for the highest capacity and most available accessory options.
With this in mind I recommend the etrailer Trailer Hitch item # e93ZR. This hitch is custom fit and attaches to your Nissan with included hardware. It has a 3,500 lbs capacity so you will easily be able to haul a uhaul trailer or a popup camper. It is recommended... view full answer...
The Thule Hitching Post Pro part # TH934XTR is a great choice with a lot of great reviews from our customers. Most women's bike frames do not have a horizontal cross tube to hang the bike from on the bike rack . An adapter bar clamps to bike's seat post and the other end clamps to handlebar stem post and creates a horizontal attachment point on the frame.
If your frames do not include a horizontal cross tube already, I recommend Hollywood Racks adapter bar part # HRBA-PRO because of it's... view full answer...
I understand your situation, and don't worry, because I have a single bike rack solution that will handle your heavier electric bikes AND also fit in both of your vehicles' hitches.
The Thule EasyFold 2-Bike Platform Carrier # TH903202 is the perfect 2-bike rack for your requirements. It is perhaps the most thoroughly-engineering bike carrier on the market, with a mix of features that make it pretty much unmatched in terms of convenience and flexibility.
For starters, the EasyFold fits... view full answer...
Yes. The Curt # C57HR will fit on your 2021 Nissan Rogue Platinum, but the downside is that it's only got a 1-1/4" receiver which isn't really a great option unless you already have a bike rack for a 1-1/4" hitch. If you don't already have a bike rack I recommend instead getting the Curt # C24HR which is the same basic hitch only with a 2" receiver; 2" hitches generally have a better available selection of hitch mounted accessories and can hold heavier items like e-bikes or cargo carriers.
I've... view full answer...
Go To Results