You will want to make sure that the dimensions of the Flexco Manual Pull-Out Steps for RVs # SMFP-2100 match up with what you have on your RV.
These steps have mounting base dimensions of 27-5/8 inches wide and 8 inches deep. The mounting bolt hole pattern is 24-1/2 inches wide and 7 inches deep. From the top of the mounting bracket to the bottom of the lower step is 12-17/32 inches. This will give you an idea of how much space you will have.
Keep in mind that these steps can be bolted... view full answer...
Yes, the Draw-Tite Trailer Hitch item # DT58GR does fit the 2022 Lexus RX350s. This hitch is custom fit and bolts directly to your RX 350 with included hardware. I have linked a picture and an installation video below so you can follow along with the process and see what the final look will be.
If you need a wiring harness you will Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector item # 56083. This custom-fit T-connector plugs into your vehicle's... view full answer...
With your 2022 Lexus RX 350 not having the factory tow package you are going to want to use the T-One Vehicle Wiring Harness # 118255. I have linked an installation video at the bottom of the page for a 2021 RX 350 where we installed this same harness in our shop so you can see where to find the connectors. view full answer...
The additional bar that you have on your Level II of the 2021 Lexus RX350 F-Sport appears to be an additional support to stiffen the chassis. There are currently no other receivers that are designed to work with this additional stabilizer under your Lexus. We do not currently have a hitch for your F-Sport version, but we do have a roof rack if that would help you meet your goal. view full answer...
Yes it does. Our website can be fun sometimes. I can confirm that the Draw-Tite Trailer Hitch item # 75540 does fit the 2019 Lexus RX 350 including the F Sport model.
I have linked an installation video below so you can see how to get it set up.
If you are planning on towing you will also need a wiring harness item # 56083 for the Lexus's with the factory tow package or item # 119250KIT for the vehicle's without the tow package and a ball mount kit item # C45534. view full answer...
Yes, the Stromberg Carlson Bike Rack Adapter for Hitch Mounted Cargo Carriers # CC-125 will work fine on the Curt cargo carrier # C18100. Installation is shown in the linked video. The bike rack includes the required installation hardware and 2 nylon tie-down straps to secure your bikes to the carrier during travel. view full answer...
The Thule K-Summit XXL Tire Chains # TH02230K66 are a confirmed fit for the 235/60R18 tires that come standard on your 2010 Lexus RX 350. These chains comes complete with a storage bag, instructions and lug nut adapters that will fit 17mm, 19mm and 21mm lug nuts. Only if you happen to have 22mm lugs will you also need kit # TH1500052581. A review video for these chains is linked as well.
You'll want to check your Lexus owner's manual for any guidance regarding using tire chains. Some cars... view full answer...
The Swagman Fork Down Roof Mounted Bike Rack, part # S64710 will fit the factory cross bars on your 2010 RX350 as long as they are no wider than 3-3/8 inches wide.
I have included a link below to the installation instructions for your review. view full answer...
As long as there is an open space at the top of that rear spoiler for the mounting strap to pass through and attach to the edge of the rear hatch, the rack is capable of being installed on the vehicle. (Rather than the straps passing up and over the spoiler).
This being said, Thule states that the hatch on the RX350 is not strong enough to accommodate the weight of the carrier plus three bikes, although using the two bike model, # TH910XT is acceptable.
To carry three bikes, a hitch mounted... view full answer...
Yes, the Draw-Tite Trailer Hitch Receiver # DT73QR you're looking at will work with your 2024 Lexus RX 350 F-Sport. This hitch has a max weight capacity of 3,500 lbs, a max tongue weight capacity of 525 lbs, and will bolt right on using the included hardware. view full answer...
The Thule Apex XT 2 Bike Rack for 1-1/4" and 2" Hitches - Tilting # TH9024XT is a nice bike rack that has the integrated cable lock, HideAway cradles with grooves for your cables and ratcheting anti-sway to protect your bikes and your vehicle. The mast is really well designed with the folding and tilt features with quick-release levers. This mast will obstruct a portion of your view as will the bikes when installed on your 2013 Lexus RX 350. The backup sensors will not be an issue without... view full answer...
The Thule Passage trunk mount bike rack # TH910XT will fit your 2008 Lexus RX 350. It will not damage the rear hatch but to open the hatch you will need to remove the bike rack first. This is because the rack could fall if you tried to open the hatch and the hatch is not made to have the extra stress on it.
I have included links to the instructions and a video of this bike rack for you.
If you will be carrying womens, childrens, or alternative frame bikes I recommend using the bike adapter... view full answer...
The Malone Cargo12 Rooftop Cargo Box item # MPG901 hasn't been test fit on your 2019 Lexus RX 350 factory crossbars but I can help you easily determine if the box will fit. First of all the crossbars will need to be less than 3" wide. This shouldn't be a problem most are that size or smaller. Your crossbars will need to be adjusted to be 25"- 27" apart. I recommend moving them as far forward as possible to ensure you can open your rear hatch. For your rear hatch to completely open you... view full answer...
The cargo box I recommend that will fit perfectly on the factory roof rack of your 2012 Lexus RX 350 is the Thule Force XT Rooftop Cargo Box, which comes in three different sizes:
- 16 Cubic Feet # TH6357B
- 18 Cubic Feet # TH6358B
- 22 Cubic Feet # TH6359B
I confirmed with the manufacturer, Thule, that this cargo box fits the factory rack of your 2012 Lexus RX 350, and is the best option because of how easy it is to use and install, along with its aerodynamic shape that will slice... view full answer...
The only hitch that will work with your 2020 Lexus RX350 F Sport is the Draw-Tite Trailer Hitch item # 75540. This hitch is custom fit and bolts to your Lexus with included hardware.
This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity, and a 675 lbs maximum tongue weight. It is not rated to be used with a weight distribution system.
I have linked an installation video below so you can see how to get this hitch set up.
If you are planning on towing you will... view full answer...
I do have an option for you but we don't have any confirmed trailer hitch fits for a 2021 Lexus RX 350 F-Sport. That said, we have heard of mixed success with installing the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75540 on an F-Sport. I have attached for you below a review of the potential roadblocks one customer ran into. view full answer...
A rear spoiler often poses a challenge to the fit of a trunk-mount bike carrier. Several manufacturers offer carriers designed expressly for compatibility with this feature, but note that in most instances it is recommended that only a 2-bike carrier be used on such vehicles, including your Lexus RX350. Note also that a rear wiper cannot be used with a trunk-mount carrier installed.
I have provided a link to our product page for trunk-mount 2-bike carriers that can be used on your RX350.... view full answer...
In order to determine if the Curt Roof Mounted Cargo Basket, # C18115, will fit your 2008 Lexus RX350, you will need to measure the thickness of the crossbars. If they are less than 3 inches thick, the basket will fit, provided the crossbar spread, center to center, is at least 15 inches. I have incldued a link to the installation details for you to view.
Another option is the Thule Mother of All Baskets, # TH690, which Thule lists as a direct fit to the factory crossbars on your vehicle. view full answer...
I did some checking and the Malone kayak carrier part # MAL38FR does fit the OEM crossbars of your 2015 Lexus RX 350 and there wouldn't be any clearance issues with the mounting hardware and the roof of your vehicle. view full answer...
Assuming that your 2007 Lexus RX350 is equipped with a 2 inch hitch like the Draw-Tite Class III, # 75153, the 24x59 Curt Cargo Carrier, # C18151, would be a great option for your vehicle.
To ensure that you will have enough clearance to utilize the folding design of the carrier, you will want to measure from the center of the hitch pin hole to the very back of your Lexus. If the measurement is less than 9 inches, you are good to go.
For added safety, I recommend the use of a Trailer... view full answer...
Go To Results