A trailer weight distribution/sway control (WD/SC) system is appropriate under a number of conditions, such as when the trailer weighs more than half the weight of the towing vehicle, when the vehicle headlights point upward when it is hitched, if steering and braking performance suffer or if there is rear-end sag in the vehicle. The linked article and video on WD/SC go into detail about these conditions.
Vehicles that have an automatic leveling system can still use WD/SC. The procedure... view full answer...
According to Draw-Tite, their # 75229 Class III hitch is a fit for all models of the 2020 Land Rover Range Rover Sport, including the Hybrid. If you'll be using the hitch for towing, you'll need a few other items to complete your towing system.
For a trailer wiring harness, use part # 118275 if the vehicle is equipped with the factory tow package or # C59236 without the factory tow package. For a ball mount, use # D-28 with the # PC3 hitch pin and either the # 19260 for a 1-7/8 or # 63845... view full answer...
The Curt hitches like part # C13243 for the 2020 Land Rover Range Rover Sport require the stabilization strap part # 18050 with accessories because the Land Rovers are not designed to handle a lot of tongue weight and accessories like bike racks are considered all tongue weight which puts a lot of leverage on the setup.
Both the Draw-Tite Hitch part # 75229 and the Curt hitch will be recessed under the bumper because they install exactly the same. I have attached a video snip showing... view full answer...
The Curt Trailer Hitch Receiver item # C13243 you referenced is confirmed to fit your 2020 Land Rover Range Rover Sport . This hitch is custom fit and bolts to your Range Rover with included hardware.
If your Range Rover doesn't have the tow package and you are in need of a wiring harness to control your trailer or accessories lighting functions I recommend the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT.... view full answer...
The Yakima SkyBox 21 Black Carbonite Rooftop Cargo Box # Y07337 does indeed mount on aero-style roof rack crossbars like the ultra-quiet Thule WingBar Evo bars # TH711520. It will in fact fit any crossbar that does not exceed the dimensions 3-1/2 x 1-11/16-inches and that are spaced apart (bar center to bar center) between 24- and 42-inches.
This black bar set, along with the Evo Clamp Feet # TH710501 and the vehicle-specific Fit Kit # TH145116 make up the Thule WingBar Evo rack system... view full answer...
I checked with Curt and they do not list any exclusions for the diesel versions of the 2016 Land Rover Range Rover Sport with a diesel engine for their hitch part # C13243 so it would fit and work well.
There is no drilling or fascia modifying to install this hitch either. You will need to remove a panel but it can easily be reinstalled once you remove the hitch. view full answer...
I checked with Curt and can verify that the Curt Trailer Hitch Receiver # C13243 is a fit for your 2019 Land Rover Range Rover Sport Autobiography, so long as it is not a hybrid model.
I have added a link to the installation instructions for you to check out as well of the Curt Trailer Hitch Receiver # C13243. view full answer...
The Rhino-Rack RSP Roof Rack # RSPT508 that uses the Vortex Aero crossbars is confirmed, by Rhino-Rack to fit all models of the 2012 Range Rover Sport as long as you have the factory installed tracks that run front to back.
The rack installs in the Rover's factory mounting points.
On the other hand if your Rover has a completely naked roof you can use Vortex Aero Crossbars # RRVA137B-2, the Track Mount RLTP Legs # RLTP, the RT-Style Tracks # RTS508, and Leg Adapters # RRVA-FK1-2. view full answer...
The trailer company was correct in advising you that with a 2016 Range Rover Sport you would need a wireless brake controller such as the Curt Echo # C51180. This controller works using a factory or aftermarket 7-way, so if you have the factory 7-way you will not need anything else. Should you need to add a 7-way you will first need a 4-flat connection, which you can add with the 4-Pole Flat Trailer Connector # 118681. Then you will want the Installation Kit # ETBC7L to get the necessary... view full answer...
The Camco UltraGuard Slide-In Camper Cover - 19-1/2' Long # CAM45773 will have some slack in the width and length to cover your side jacks. The overall width of your camper is 97 inches, so you will have 5 inches of width extra. You will also have about 24 inches of additional length based on the manufacturer measurements, so when you also account for that you will have no problem covering those swing out jacks as well. The hold-down straps that are integrated will need to be secured... view full answer...
We do offer a plug-in 4-way wiring harness for your 2015 Land Rover Range Rover Sport, with the following part:
- Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56293
I have added a link below to a video install on a similar model year Range Rover Sport for you to check out as well. view full answer...
If you installed the Rhino-Rack RT-Style Roof Rack Tracks # RTS508 on your 2012 Land Rover Range Rover Sport these are intended for use with Rhino-Rack track-mounted legs, including parts # RLTP, # RLTF or # RLT500.
These tracks are not listed as being compatible with the Range Rover OEM roof rack so to confirm I checked with my technical contact at Rhino-Rack. My contact there also could not provide any assurance of compatibility of these tracks with the OEM roof rack.
The RTS508 tracks... view full answer...
The Hopkins wiring harness you looked at, part # HM43534, actually fits some Nissan vehicles that have the factory tow package.
If your 2011 Land Rover Range Rover Sport didn't come with any factory trailer wiring you need a universal harness like part # C59496. Then you can convert that 4-way to a 7-way using our # ETBC7 kit. This kit is designed to work with the Curt Echo brake controller, part # C51180, because it doesn't need the additional wire ran to the Rover's cab. The install... view full answer...
For your Pedego Stretch electric bike I recommend the the Yakima OnRamp Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount # Y36FR has a maximum wheelbase of 50" and weight capacity of 66lbs per bike but drops down to 40lbs if you're hauling off-road or by RV. view full answer...
The Thule Force XT, part # TH6357B is compatible with spreads of 23-5/8 Inches to 33 inches, and your 27 inch spread will be a good fit for this box.
Prior to purchase, you'll want to measure the distance from the center of the front crossbar to the line where your rear hatch meets your roof. You will need this distance to be longer than 47-1/2 inches if you want to be able to fully use your rear hatch while the box is installed. view full answer...
The Rhino-Rack Sportz crossbars included with rack RSPT508 are 3-1/8 inches wide by 1-1/4 inches tall. You will need a paddleboard carrier that will mount to this size bar. The SUPDawg, # Y04075, will fit around bars up to 3-1/2 inches wide. I have included a video review of this carrier for you. view full answer...
We have many tire chains that will fit your 2018 Range Rover Velar. The Konig Premium Self-Tensioning Snow Tire Chains - Diamond Pattern - D Link - K-Summit XXL - Size K77, part # TH02230K77, that was attached to your question will fit your 255/55-20 tires. These tire chains are also my recommendation, they are the only one compatible with your 2018 Range Rover Sport that offers wheel protection. These tire chains are Class S Compatible, so they are designed for vehicles that do not have... view full answer...
While we have not test fit the Kuat Transfer 2 Bike Platform Rack # KU74FR on a 2018 Land Rover Ranger Rover Sport with a 2" hitch such as the Curt Trailer Hitch Receiver # C13243, you can find out very easily by taking a quick measurement.
This bike rack measures 6" from the hitch pin hole to the closest part of the rack. All you need to do is measure from your hitch pin hole to the edge of your bumper; if the closest part is less than 6" you can use the Transfer and its folding feature.... view full answer...
There is one option for a plug-in brake controller option for your 2016 Land Rover Range Rover Sport with the factory tow package. The adapter for the brake controller will be under the dash, and you'll have to remove the lower dash panel and look behind the brake pedal. It is tucked up in there pretty good, so you'll need a small flashlight to find it, but it will be there.
Then, what you'll need is a brake controller from Redarc, along with the plug-in harness, and I confirmed this fit... view full answer...
Go To Results