The Solera RV Slide-Out Awning part # LCV000163300 fits a trailer with a slide-out 152" to 157" long when measuring the outside flanges. The next closest option is the Solera RV Slide-Out Awning part # LCV000163299 which fits a slide-out 146" to 151" long or the Solera RV Slide-Out Awning part # LCV000163301 which fits a slide-out 158" to 163" long.
I don't have any specs on your trailer so you will need to measure this for yourself. view full answer...
I would be happy to help you. For your 2006 Kenworth T300 I recommend the Tekonsha Prodigy P2 Trailer Brake Controller item # 90885. This controller ties into the brake stoplight switch that's usually located above the brake pedal, which is what tells the controller that the vehicle brakes are being applied so the connection is purely electrical, not hydraulic or air actuated.
What is important is that the controller is wired to your Kenworth correctly. The red wire runs to the stoplight... view full answer...
I have exactly what you will need to ensure warm coolant in flowing through your 2005 Kenworth T600 at all times. For this you are indeed going to want a large capacity coolant heater. The most well equipped heater we have for your needs is the Kat's Heaters Thermostatically Controlled Circulating Tank Heater part # KH13200. The heater is thermostatically controlled meaning it turns on when plugged in and shuts off when the temperature reaches 175 degrees fahrenheit.
The above heater is... view full answer...
The Timbren Front Suspension Enhancement System # TKWF001 will not increase the weight rating of your front axle. It will simply help add stability and shock absorption. This system is rated for 10,0000 lb capacity and designed for trucks equipped with the 8 bag Airglide AG1000 suspension system. If this is the system you have it will work well for you.
If the numbers you gave are accurate, there is not a system designed to work with your truck from any of our manufacturers. view full answer...
I do see your Holland FW35 is designed to fit a 2" kingpin like the one used on both the 25K # KPG5-R25-IP and 30K # KPG5-R30IP coupler adapters you looked at.
For the wiring you will need to create a custom adapter. First you will need the 7-Pole Round Pin Connector # PK11702. This will need to be wired to the Tail Light Converter # HM48847 since the 7-pin connector on your Kenworth has separate wiring for the brake and turn signals and a 7-way Blade # PK12-707E combines the brake and... view full answer...
Go To Results