Currently your only option would be to use the Custom Third Brake Light Camera System w/ Rear View Mirror # 3460005 because they have not yet developed a system for the 12" screen in your 2022 Ford F-350. The Custom Third Brake Light Camera for 8" Factory Monitor # 3460001 is not going to be compatible with your 12" monitor. view full answer...
With the Buyers Products Threaded Eye Bolt # 337B56725 having a safe working load of 2,600 pounds, it will depend on the weight of the trailer. If you are at or under this capacity, then it will definitely work for you. If you are over this capacity, I suggest going with something more heavy duty, like the # 337B56728, which has a 6,000 pound safe working capacity. view full answer...
Yes it will! I verified with Draw-Tite front mounted hitch will fit your 2021 Ford F-350 4x4; the correct fit is the following part:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65076
I have added a link below to the installation instructions for you to check out as well if you'd like to take a look. view full answer...
Yes, the Ultra-Fab Ultra Scissor Jack # UF48-979006 will work as a replacement for your damaged stabilizer on your 2019 Keystone Hideout 274LHS. This jack has a universal style bolt mounting plate and an oversized footplate to prevent it from sinking into loose soil and gravel as easily. You will need to reuse your factory hardware or source new hardware if it is damaged.
If you do not already use one the Ultra-Fab Speed Socket Power Drill Adapter # UF48-979005 will make raising and lowering... view full answer...
We haven't come across any reported rattling issues with any of the Pace Edwards JackRabbit Hard Tonneau Covers so you can rest assured this is a great choice. The correct fit for your 2019 Ford F-350 with a 6-1/2 foot bed is # 311-JRFA18A44. This is a manual retractable cover and it's constructed of padded ArmorTek deck laminated to rigid aluminum panels which gives you the best of both worlds: soft-cover look with hard-cover security.
The width of the rails of the Pace Edwards JackRabbit... view full answer...
In order to use the B&W Patriot 5th Wheel Trailer Slider Hitch part # BWRVK3270 on a 2019 Ford F-350 with 5th Wheel Prep Package you will need to use the Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package part # DM6175. view full answer...
It is not easy to make that call based a picture of a conventional-tow trailer in the same place. Just from looking at the picture it would SEEM that the Curt # C16520-16020 hitch would be ok. (It's going to be as ok as any other hitch) If you're just going to make the call by eyeball, take a look at your street and driveway and think, is the gutter your driving over here any different than one you will have to transverse to get into a gas station from the street? I spoke with my contact... view full answer...
It does sound like you need an adapter module. Electric over hydraulic actuators do not like to work with integrated brake controllers. The Dexter BrakeRite SD Adapter for Ford/Chevy Integral Brake Controllers item # T4845900 works specifically with the Dexter BrakeRite I Kit item # T4813102. It will be a plug and play installation. You will want to verify which one you have and check the connectors.
If you do not have the connectors you will want the Adapter Module for BrakeRite Electric... view full answer...
The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs - Rear Axle # F2701 will have heavier brackets to support the Red Label Extreme Bags. My tech contact at Firestone said the air bags alone most likely would fit your current brackets, but he wouldn't recommend using those bags with your current brackets as the brackets won't be as strong as the springs. view full answer...
The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY56FR, you were looking at, is designed to replace a standard pin box. This means dimensionally it will be comparable if not identical to the pin box currently on your Forest River Cardinal. Replacement pin boxes like this one keep the same or very similar clearance to the original. It has the same bolt pattern as the Lippert 1621 and mounts using your existing bolts.
So long as the flatbed doesn't raise the height... view full answer...
I may have an option for you, but there is not any truck camper tie downs that will fit your 2017 Ford F-350 Dually with the flip-out bed steps.
The only option is to remove the flip-out steps if possible which would then allow you to use the TorkLift Custom Frame-Mounted Camper Tie-Downs Front # TLF2021 and Rear # TLF3008.
I included video of the TorkLift Camper Tie-Downs being installed on a 2020 Ford F-250 for you to take a look at. view full answer...
I confirmed for you with the manufacturer that the correct air bags for your 2021 Ford F-350 Super Duty dually 4x4 are the following:
- Firestone Ride-Rite Air Helper Springs # F35FV
Not only are these a fit for your '21 F-350, they are also the best air bags available. The Ride-Rite are the most well-constructed air bags because they are made with four layers of reinforced rubber, which is a thicker, more reliable construction than other air bags which have just two rubber layers.
The... view full answer...
The Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches # RP87FR has not yet been confirmed to fit the 2023 model year of the F-350. You could try reaching out to Ford to see if there are any differences compared to the 2022 models, which the # RP87FR is confirmed to fit, to see if it would fit your 2023.
If it will not fit then you could install the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BW83FR and swap the base... view full answer...
Equal-i-zer weight distribution hitches use different heads for each capacity so you would need to completely swap out the entire system in order to meet the GVWR of your trailer. If the system you have is all original then the head and spring bars would also be rated for 10,000lbs like the shank is. If you bought it used or swapped anything out then you would need to find the item number sticker on each part to determine what they are and their capacity.
To determine the best replacement... view full answer...
The towing capacity for a 2012 Ford E-350 Van ranges from 6,300 to 7,400lbs so you could go with a Class III hitch like the Curt # 13055 (6k capacity) or you could go a bit higher to a Class IV hitch # 14055 (10k capacity) to ensure that you can use your van's full capacity.
As a reminder, you have to go with the lowest rating whether that's your vehicle or the trailer hitch. This means that if the van's capacity is only 6k but you put a 10k hitch on you'd still be limited to only 6k... view full answer...
The only camper tie-downs that wouldn't interfere with your running boards would be the Brophy Slide In Camper Tie-Downs # HSWB, which mount to the inner lip of the bedrails. You'll want to verify that these brackets will clear the body of the bed, DRW models typically stick out too far for the brackets to fit properly.
To complete your setup you can use some turnbuckles like the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP. view full answer...
Yes, you can absolutely get the whole kit of the Thule sliding ladder rack with the rack as well as the base rails for your 2021 Ford F-350. I verified for you with the manufacturer that the correct fit for your 2021 Ford F-350 short bed is the following:
- Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-785
You made a great choice going with the TracRac SR # TH43003XT-785 for your F-350 due to its heavy-duty 1,250 lb load capacity to transport anything that you need, along... view full answer...
Yes, the B&W Custom Installation Kit w/ Base Rails # BWRVK2402 will fit your 2023 Ford F-350. This has been tested and confirmed by B&W. Installation of these base rails will allow you to use the B&W Patriot # BWRVK3270 and any other 5th wheel hitch that fits industry standard rails. view full answer...
The base rail slider base for the Patriot is not compatible with your Companion, but you can get just the sliding base for a Companion with part # BWRVB3405. This would allow you to transfer over the hitch head to minimize the cost. view full answer...
As long as your Curt Q20 has base rail style feet like part # C16130 and your 2022 Ford F-350 has ISR base rails you'll be able to transfer the hitch over with no issues. view full answer...
Go To Results