Well since the Phoenix USA Baby Moon Hubcap # PX1307SS will only work with conventional wheels that are up to 15", your 2005 Toyota Tundra with 16" wheels are going to be too big.
For a 16" wheel we have the Phoenix USA Baby Moon Hubcap # PX1309SS. These will work with 16" wheels, has an overall measurement of 12" x 3", and an inner diameter of 11-11/16".
This hubcap might seem to be a bit too large for your wheel, however as long as your wheel has a 6 on 5-1/2" or 8 on 6-1/2" bolt pattern... view full answer...
I went out to the warehouse and pulled Baby Moon hubcap # AM90086 It measures 2-11/16 inches from the inside center out to the edge. But please note that this hubcap fits 13 inch to 15 inch conventional steel wheels. There isn't a Baby Moon that fits an 8 inch tire and wheel. But if you can tell me the diameter of the center pilot holes on your wheels then I can make other recommendations. view full answer...
The Americana Baby Moon Trailer Wheel Center Cap # AM90086 is intended for 13-, 14- and 15-inch conventional steel trailer wheels like # AM20504 that have three projections around their center, as shown in the linked photo. The cover's inside diameter of 9-1/4-inches matches up to the outsides of these projections for a snug snap-on fit.
The cover will not work on spoke wheels with triangular cutouts like Dexstar Steel 8-Spoke Trailer Wheel # AM20522. view full answer...
it would be a very tight fit but it is possible for The Wheel Club # WI490 to fit your 13 inch tires with the baby moons on them. A safer bet would ne the Rack'em lock, # RA-25. It doesn't cover any part of the center of the wheel so the baby moons would not be in the way. I have included links to video reviews of both locks for you. view full answer...
The part you need is the Phoenix USA Front Hub Cover w/ Pop Out - 10 on 225mm - ABS Plastic - Qty 1, part # PXQH2001F, you attached to your question.
I have included a video review link below. view full answer...
For baby moon covers that fit the wheel and tire combo part # AM32575 that you referenced we have the Americana Pointed Top Baby Moon Trailer Wheel Center Cap # AM981306 which has an inside diameter of 10-1/4 inch. view full answer...
The Dexstar Conventional Steel Wheel # AM20334 is designed to be used with a Baby Moon Trailer Wheel Center Cap # AM90086. The profile which allows for the baby moon center cap does not typically allow for a standard wheel hubcap to fit. view full answer...
It appears you will have to switch to a Conventional Wheel # AM20304 to use a Baby Moon Hubcap # AM90086. I am unable to see anyone manufacturing a baby moon or other type of hubcap for your Vintage Wheel # AM20334. If you can tell me the bearing sizes used on your hubs I can verify if there is a hub which will fit your spindle without modification. view full answer...
For the Dexstar Conventional Steel Wheel, part # AM20212 you mentioned, the Americana Baby Moon Trailer Wheel Center Cap that is designed to fit is part # AM90086. view full answer...
There isn't a way for me to look up whether or not the part # AM90086 could fit your trailer but if you measure your wheels where these would install and compare to the picture I attached you can see if these would work. view full answer...
Conventional steel wheels like the # AM20514 often fit older trucks like your 1938 GMC pickup. However, these are only rated for trailer use. These 15" wheels have an offset of 0 and a 6 on 5-1/2 bolt pattern. A hubcap will fit but it would be like the # AM981306 which is slightly larger than your 7-1/2" to 8" measurement with a 10-9/16" overall diameter.
If you have a 5 on 4-1/2 bolt pattern then the correct wheel would be the # AM20504. This would use a slightly smaller hubcap like... view full answer...
Appreciate the purchase, and there is a hubcap option that fits the Dexstar Conventional Steel Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat # AM20758:
- Phoenix USA Baby Moon Hubcap - Stainless Steel # PX1309SS view full answer...
We do have exactly what you are looking for, hubcaps that fit 16 inch trailer wheels that have 8 lugs; what you need is the following:
- Phoenix USA Baby Moon Hubcap # PX1309SS
These fit 16" conventional wheels that have a 6 on 5-1/2" or 8 on 6-1/2" bolt pattern, and I have added a link below to a video review for you to check out as well. view full answer...
We have a few baby moon hubcaps designed for 15" wheels and 6-lug bolt patterns:
- Americana Baby Moon Trailer Wheel Center Cap # AM90086
- Americana Pointed Top Baby Moon Trailer Wheel Center Cap # AM981306
These fit if your wheels have these 3 nibs that you see in the attached photo, and if the inner and outer rings measure 9" and 9-1/4" respectively. view full answer...
The correct baby moon hubcaps for the Dexstar Conventional Steel Wheel with Offset part # AM20504 is the Americana Baby Moon Trailer Wheel Center Cap part # AM90086. view full answer...
Yes, we do have baby moon hubcaps that will fit the Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 item # AM20545. They are the Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel - Qty 1 item # AM90086. view full answer...
The Americana Baby Moon Trailer Wheel Center Cap, part # AM90086 is designed to fit conventional wheels that are 13, 14, and 15 inch diameter.
These are chrome-plated hubcaps and are 9-1/2 inch diameter. If you have conventional wheels on your Toyota and have one of the 3 sizes listed you may want to buy the baby moons for all 4 wheels. I have attached a photo of the # AM90086 with the dimension noted you can check out. view full answer...
Based on the measurements of your wheel you included it appears you will need the Phoenix USA Baby Moon Hubcap # PX1307SS. This hubcap has an outer diameter of 10-1/2" with an inner diameter of 10-3/8" and a lip that is 10-3/16" across.
For the return you will need to contact our customer service team at 1-800-298-1624 to get a return authorization to mail them back. Once the item is returned and inspected any refund will be issued. In the mean time you can place the order online for... view full answer...
Based on the research I've done on your 2020 Gulf Stream Vintage Cruiser 23RSS you have 14" wheels meaning the correct Baby Moon hubcap should be the Americana Baby Moon Trailer Wheel Center Cap - Chrome # AM90086 although this is meant to be used on 5-lug wheels so you'll want to doublecheck that first.
If your trailer has 5-lug wheels, then this is the correct hubcap for your 2020 Gulf Stream Vintage Cruiser Travel Trailer. view full answer...
The best option we have for a vintage style hub cap is the Americana Baby Moon Trailer Wheel Center Cap part # AM90086 which is specific to the Dexstar Conventional Steel Wheel part # AM20766. I could not confirm fit of any other style hub cap for this wheel. view full answer...