You can use the Andersen Ultimate Connection hitch with the Gooseneck Turnover ball installed in the 2018 Ford F-250 however it will not provide work for turning clearance. If you are concerned with turning radius the Andersen Ultimate Connection Gooseneck Version is only going to provide you with 8-9" of cab clearance offset. It will not be possible to make a 90 degree turn with the limited amount of offset the Andersen provides in a short bed truck. A slider will provide you with the... view full answer...
Yes, since the Under-Bed Rail and Installation Kit # RP87FR is the same thing as the OEM puck system for your 2017 Ford F-250 you can use the B&W Companion # BWRVK3370 with it.
If you don't already have a wiring connection in your truck bed I also recommend installing the Bargman # 54701-003-010 to make connecting/disconnecting your 5th wheel trailer wiring much easier. view full answer...
The Demco Recon has an option for a standard gooseneck ball and a recessed gooseneck ball. So what you will need for your 2015 Ford F-250 with a standard gooseneck is the following:
- Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045
The Recon is a really good option to tow a 5th wheel with a gooseneck ball because has a superb single-piece jaw that wraps totally around the king pin, and is reinforced via a 3/4" solid steel bar that locks into place once the jaw is... view full answer...
If you want to use the Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000lbs Item # RP30047 and drop into the factory puck system you'll need the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches - 20,000lbs Item # RP30156.
Since you do have a 6-3/4' bed I do recommend switching to a sliding hitch or a sidewinder pin box. For the sliding hitch I recommend the Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000lbs # C16521 with the Adapter Rails... view full answer...
The correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for your 2019 Ford F-250 is the part # BWGNRK1116.
B&W used to list the 16 for a 2WD and the 17 for a 4WD but they had new information surface not that long ago showing that the 16 fits both 2WD and 4WD versions so that is the kit you want to use.
Attached is a sample install video of this kit on a 2017 F-350 as well as a link to the installation instructions for you to check out. If you don't already have a 7-Way in the bed... view full answer...
We don't have any reviews or testimonials for the Stability Plus Stabilizer Helper Springs # SPS94FR not working with airbags. From my understanding, as long as the Stability Plus Stabilizer Helper Springs # SPS94FR and the airbags do not interfere with one another, then there won't be a issue.
One of our installers just posted a video of this being installed on a truck and based on that it is pretty likely that this will work with air bags.
If you tell me what truck you have and what... view full answer...
I recommend going with Firestone air bags. They will fit with the B&W Gooseneck Trailer Hitch # BWGNRK1116 on your 2022 Ford F-250 Super Duty 4x4 and they are the most reliable option on the market due to their enhanced construction which includes a double-convoluted shape with a braided wire girdle, and the crimp-rolled seal that keeps the bags securely anchored to the metal end plates.
The Firestone air bags that fit your vehicle come in the following options:
Ride-Rite 5K Rating -... view full answer...
Yes, the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter part # BWRVK3400 will work with any B&W Turnoverball Underbed Gooseneck Trailer Hitch including the one in your 2017 Chevrolet Silverado. view full answer...
Yes, we have two hitches that fit your 2020 Ford F-250; the Draw Tite part # 65076 and the Curt # C31078. The difference is that the Curt will not stick out far past the air dam. I have attached a picture of the Curt showing this. Also the Curt is made in the USA.
Regarding the Tremor package you will note that the air dam is very short in height compared to the other F-250 trim levels. You will need to disregard the trimming instructions as they are designed for the standard air dam.... view full answer...
The Curt Front Mount Trailer Hitch Receiver # C31078 for your 2018 Ford F-250 Super Duty has a drop of 7" from the center of the forwardmost bolt hole to the bottom of the crosstube (see attached). The receiver is welded to the bottom of this crosstube so you're looking at about 9-1/8" from that hole to the bottom of the inside of the receiver opening.
Attached is an installation video of this receiver on a 2020 F-350 for you to check out. view full answer...
You are definitely going to need a longer shank to compensate for your lift. I recommend the Curt Weight Distribution Shank item # 17120. This will give you a few more inches of drop so you can keep your truck and trailer level.
I attached a picture that has dimensions of the shank for you to check out as well. view full answer...
I'm not sure what system you are talking about specifically, but so long as you have air helper springs like Ride-Rite from Firestone, then yes, you can use the Firestone Automatic, Pneumatic Height-Control Valve - Dual Leveling # F2017.
Keep in mind the Height-Control Valve does require a compressor and air tank, the Firestone Air Command - Heavy-Duty Compressor and 1/2-Gallon Tank # F2047. view full answer...
Yes as long as you have 3" from the back of your tool box to the front edge of your prep package hole the Curt Q20 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package part # C16530-16020 will workout well. view full answer...
According to the folks at SuperSprings, the manufacturer of SumoSprings, the Rebel # SSR-129-40-2 IS compatible with the Tremor Package, as long as your truck does NOT have the 3 inch blocks on top of the overload springs. If you have the 1 inch blocks, the # SSR-129-40-2 will work perfectly.
If you click the provided links, you can see some informational videos about the SumoSprings Rebel helper springs. view full answer...
There is an adapter for your 3 inch trailer hitch receiver that will allow you to use a ball mount with a 2 inch shank:
- Buyers Products 3" to 2" Receiver Tube Adapter # 337RTA302
This will fit right in your 3" hitch and allow you to use your ball mount with a 2" shank. And the best part is, unlike other hitch reducers, this one will not reduce the capacity of your hitch by 50 percent, though it does have a 12,000 lbs towing and 1,200 lb tongue weight capacity.
To secure it to your... view full answer...
Yes, the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch # BWRVK3400 is the correct hitch. This will fit into the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1111 on your 2015 Ford F-250 crew cab short bed. This is going to be the best option for a slider hitch as you already have the B&W Turnoverball. view full answer...
The Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 30,000 lbs # C60700 is confirmed to fit your 2022 Ford F-250 Super Duty with an 8 foot bed. This gooseneck hitch has a simple, 1-person bolt-on installation and uses a pop-in ball that is easy to insert and remove. It features a sturdy steel construction, a corrosion-resistant finish, and a limited lifetime warranty.
I have attached an installation and review video for your reference. view full answer...
The Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider # DM8550024 is designed to fit directly to the OEM prep package on a 2020 Ford F-250 Super Duty. If you don't have that but you like the idea of having it then you will also need the Reese Under-Bed Gooseneck Trailer Hitch w/ Custom Installation Kit # RP39FR which is the exact same thing as the OEM prep package.
If you're wanting to use the autoslider but you want to cut down the cost a little then what you'll need to do is install... view full answer...
You will not be able to move the Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers # AL89275 from your old 2005 Silverado 3500 to your new 2018 Ford F250 FX4. The # AL88275 will not be compatible with your new truck.
The correct air lifter for your 2018 Ford F-250 FX4 will be the Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers # AL88399.
If you also wanted to add a compressor system, the best choice is the Air Lift # AL25980EZ. view full answer...
TheB&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual Jaw - 20K # BWRVK3370 is a confirmed fit for you Ford F-250 Super Duty short bed truck.
It has 1 inch thick dual locking jaws that provide 360 degrees of contact for your king-pin, that is simple to connect and release.
It has three height settings and can be adjusted fore and aft 2 inches. view full answer...
Go To Results