The Rubber Trim for Vehicle Trim Molding, # SR78FR is 7/8" as shown in the attached and identified as fitting 3/4" tracks as measured on the inside, such as your measurement is taken. view full answer...
The Tekonsha T-One Vehicle Wiring Harness # 118723 is designed to work with the LX and Touring Trims of your 2020 Chrysler Pacifica. These trims do not have LED tail lights.
For your Limited trim you will need either the Curt T-Connector Vehicle Wiring Harness # C56322 or Tekonsha T-One Vehicle Wiring Harness # 118712.
To ensure correct fitment it is best to check your VIN number to ensure that you get the correct kit. The 7th Digit of your VIN number will tell you what trim level you... view full answer...
There is not a difference in the wiring hook ups on the Curt T-Connector Vehicle Wiring Harness # C55382 for a 2006 Jeep Liberty Sport Trim or Limited Trim. The Sport trim is more of a base trim while the Limited trim will have more features and exterior brightwork. The taillights and connectors will all be the same.
The Mounting Brackets # 18144 and # 18140 will allow you to secure the 4-way flat wiring to your receiver with no drilling. view full answer...
The trailer hitches we offer for the 2014 Acura MDX will fit your vehicle with the Rear Sport Bumper Trim. This trim is the same shape as the non-sport trim, but is a different color. Since the shape is the same, the trailer hitches for the MDX will fit easily with the sport bumper trim on your MDX.
Of the hitches that are designed to custom fit your MDX, I highly recommend the etraler Trailer Hitch Receiver Class III # e98840. I like this trailer hitch because the cross tube of the hitch... view full answer...
The only trailer hitch available for a 2015 Fiat 500 Abarth is the Curt Trailer Hitch Receiver part # C11347. The Curt Hitch does unfortunately require trimming of a rear panel but this is only very minor and it won't be visible from outside the vehicle. If you ever removed the hitch and wanted to revert the vehicle back to stock, you can replace just this panel and not the whole rear bumper fascia.
I have attached a photo of the required trimming needed. view full answer...
The etrailer Trailer Hitch Receiver # e98841 will only fit the Sport trim level of your 2013 Hyundai Santa Fe. This trim will have a decal on the rear hatch door as well as only seat 5 passengers.
The Curt Trailer Hitch Receiver # C13153 will fit the larger 6 & 7 passenger Santa Fe GLS and Limited trims levels.
I cannot lookup your vehicle information based on a VIN number but you can contact your local Hyundai dealer who will be able to help you identify your Santa Fe if you are still... view full answer...
The CURT Front Mount Hitch, part # C31017, will fit the 2007 Dodge Ram 1500 Mega Cab 4x4. You may have to trim the front air dam or the plastic fascia that is attached beneath the front bumper on your vehicle for installation of the CURT hitch. How much trimming will depend on which model and trim package is on your vehicle. The trimmed area will be hidden once the hitch is installed.
Nothing different with the installation on a 4x4 or a 4x2 vehicle.
I attached installation instructions... view full answer...
The metal bumper trimming is an as needed situation for the Draw-Tite Sportframe Trailer Hitch Receiver # 24954 on your 2022 Honda Civic.
Not every vehicle will require it to be trimmed and you can see in the instructions linked below that it shows you how to tell before reassembly if your bumper will need to be trimmed. There are also different fasteners used on the 2022 so be sure to see directions before removing your rear fascia. view full answer...
To install the # C13143 hitch, the underbody trim panel you describe would be temporarily removed. The hitch would then be installed to the vehicle frame. The panel will need some minor trimming to fit around the hitch, and will then be reinstalled.
The trimming is very minor, and would only be visible from directly under the vehicle. view full answer...
The amount of underbody panel that needs to be trimmed is a factor of the geometry of the hitch. The Curt # C11416 hitch does require some trimming of the fascia. The good news is that the hole is under the vehicle and wouldn't be visible unless you're under the vehicle specifically looking for it.
I have attached an install video for you to see the hole for yourself. view full answer...
I have a solution for you. While the Curt Class 3 Trailer Hitch Receiver for 2" Hitches # C95CR will fit your 2020 Acura RDX, it will be more exposed than your factory hitch you have installed now on your vehicle. Unfortunately, there are no photos of # C95CR installed on your vehicle on our website, the manufacturer website, or the instruction manual. However, I did attach a photo of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76268 (this hitch is also... view full answer...
According to the research I've don't it looks like the LE and LE Plus models of your 2018 Toyota Highlander are the same when it comes to the trim and configuration at the back. Really the only difference I could find is that the LE Plus has a power liftgate. Because of this I believe that the Curt Trailer Hitch # C13200 will fit your vehicle. I did try reaching out to Curt and my contact said that they haven't tested the hitch on an LE Plus so he wouldn't be able to confirm anything.
I... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76288 for the 2020 BMW X5 does require some fascia trimming and slight bumper beam mounting plate trimming. The bumper beam is temporarily removed but reinstalled after trimming the mounting plate. The installation does require trimming a 3.75" x 4 " sqaure into the fascia for the hitch receiver to stick through since it's a concealed cross tube design the only portion of the hitch visible after installation is the receiver tube. I have... view full answer...
The Curt Front Mount Receiver, item # 31352, has a 9,000 Lbs. Max. Line Pull, and lower fascia trimming may be required on some models. The part that may need to be trimmed is the plastic fascia that is attached to the bottom of the chrome bumper on some models. If this plastic piece is not installed on your vehicle you will not have to trim with the Curt receiver.
The Draw-Tite Front Receiver, item # 65043, for your 2005 F-150, has a 9,000 Lbs. Max. Line Pull rating also, so it is not... view full answer...
I double checked with the manufacturer, Curt, for you and can verify that the trailer hitch you asked about does fit all models and trims of the 2021 Hyundai Santa Fe. The hitch you need is the following:
- Curt Trailer Hitch Receiver # C34ER
I have added a link below to the instruction manual to check out as well if you'd like to take a look. view full answer...
Nope, the bumper and fascia do not require any trimming to install the Stealth Hitches trailer hitch on your 2023 BMW X5. Just like the 2021 and 2022 models, there is just a piece of rock guard under the vehicle that needs to be trimmed. The photo I have added shows the part that needs to be trimmed.
Stealth Hitches has two options for your 2023 BMW X5 depending on what you will be using the hitch for:
- Bike Rack/Accessory Only: Stealth Hitches Hidden Rack Receiver # SH89VR
- Bike Rack/Accessory... view full answer...
I have a possible solution for you, but the Malone AirFlow2 58 Inch, part # MPG216 would be adversely affected by trimming the roof rails. Additionally, there is a good chance the endcaps will not fit on the bar after they are trimmed.
Instead, I recommend looking at the 50 inch version of the AirFlow 2, part # MPG215. I took a measurement and the spread between bases is 44 inches at their maximum spread. This could be a fit for your vehicle if the raised rails on your vehicle are 44 inches... view full answer...
Great question Tara. The EcoHitch Hidden Trailer Hitch Receiver part # 306-X7391 is a concealed cross tube hitch for the 2020 Subaru Forester that does require fascia trimming. It requires a 2-1/4" X 5-1/2" X rectangle cut out. I have attached a photo for your reference. Since the hitch reciever does not stick out of the fascia you are just trimming a little off the bottom of the bumper fascia to make room for the hitch. I have also attached an installation video for your reference.
For... view full answer...
Curt trailer hitch # C11422 (fascia trimming not required) fits the following vehicles:
2017 - 2018 Volkswagen Golf Alltrack
2017 - 2017 Volkswagen Golf SportWagen
2015 - 2016 Volkswagen Golf SportWagen TDI models
2015 - 2016 Volkswagen Golf SportWagen TSI Gasoline models
So if your 2015 V-Dub Golf TDI is a SportWagen then the hitch will fit. If your Golf is not a wagon model and is not an R model then use hitch # C11412 (underbody trimming required but no fascia trimming). If you do... view full answer...
For the 2006 Honda Element, etrailer doesn't have sub-model specific information about if fascia needed trimming to install their # e78KR Class III hitch. The install directions state that for all models, some drilling will be required but no fascia trimming. The hitch sits below the bumper.
If you have the squared-off bumper that doesn't slant downward under the vehicle, then it could be possible that some trimming would be needed, but our directions say no trimming needed. Unfortunately,... view full answer...