The correct replacement magnetic door switch for your Kwikee Electric RV Steps is the Replacement Magnetic Door Sensor for Kwikee Electric RV Steps part # LC369299. The switches are only sold as a complete assembly with both the door and trailer side but if you only need one you can just simply take the one you need from the kit and use the other as backup. view full answer...
The Bullet Door Latch for RV Screen Door # 37210785 is the only option we have with the finger pull latch. This is a universal style screen door latch, it is not designed specifically for any 1 RV screen door therefore it will work with your 1993 Aplenlite 5th wheel's screen door. view full answer...
The Screen Shot Automatic Screen Door Closer for RVs part # LC730811 is designed to fit into the inner channel of 22" Lippert screen door. All of the doors on the Challenger website does not look like they have the inner channel.
I recommend to use the Camco RV Screen Door Closer Kit part # CAM44133 which is more of an universal fit. view full answer...
RV furniture and appliances are designed to fit through the very narrow doorways that they have so the Everchill fridge part # EV27FR that you referenced would fit through a 24 inch wide door with the doors removed. view full answer...
The replacement strike plate for your Global Link RV Entry Door Locking Latch Kit part # 295-000019 is the strike plate part # GL94FR. view full answer...
I do have an option for you though we don't carry the exact Winnebago Left Hand Screen Door Latch you're looking for. That said, we do have some similar options such as the Bi-Directional Screen Door Latch part # 37206-11865 which can be used on the left side. I have also attached a few other possible options below. These may take modifications in order to replace your existing latch.
Door Latch for Philips RV Screen Doors part # 37211215
Door Latch for Amerimax RV Screen Doors part # 37210775 view full answer...
We currently do not carry a Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option part # 295-000019 or latch entry door lock that fits 1-3/4" door. If you already have the cut out for the latch then there is not an option that we carry for you.
If you do not have the cut out for a latch, we do have other options for locks available like the Valterra Deadbolt Lock for RVs - Single Cylinder - Stainless Steel part # L32CS3108 which fits 1-3/8" to 1-3/4" thick RV doors. This... view full answer...
Yes, the Replacement Controlled Motion Hinge for RV Entry Door is offered in both black as part # LC95VR and white as part # LC22NJ. view full answer...
The Replacement Door for Phoenix Faucets, # PF267001, is designed to be a genuine replacement part for a Phoenix exterior RV shower box. The door may fit your outside shower box, but we do not have a way to check to see if this door will be a confirm fit.
You may have to measure the opening of your shower box to see if this door can work on your RV. The door measures 12-3/8 of an inch long x 7-7/8 of an inch wide.
If you can email me the compartment dimensions I will try to find a door... view full answer...
Yes, the Bauer RV Baggage Door Slam Latch part # BA57FR will fit your 2011 Damon Daybreak Class A motorhome. This was designed to fit the standard baggage door latch dimensions like what you have so it would work great. view full answer...
The lift assist bracket that installs inside the door frame in the SolidStep Lift Assist Kit part # LC733939 for 30" to 36" RV Doors and lift assist kit part # LC733937 for 26" to 29" RV door frames installs 1/4 inch away from the door frame.
I contacted SolidStep and the bracket in the LC733939 kit is 20-3/4 inches wide and the bracket in the LC733937 kit is 24 inches wide. view full answer...
We have the Replacement Bauer 722 Key # BA87RR but if you're needing a dead bolt and door latch for an RV it will be a toss up what part numbers you get as we aren't able to choose specific locks for those kits.
For a latch and deadbolt system you'll need the Bauer Products Motorhome Door Lock # BA64FR. view full answer...
The Global Link RV Entry Door Locking Latch Kit # 295-000002 referenced in your question may work great on the door of your 1967 Tradewinds Yachtsman but unfortunately trailer manufacturers don't keep track of smaller parts like these that are installed at the factory so I'm not able to confirm a perfect fit.
What you can do is just take a couple of measurements on the door of your trailer to see if this particular lock will work well. It is designed for doors that are 1-1/4 inches to... view full answer...
The Camco RV Adjustable Screen Door Push Bar part # CAM43977 can be adjusted to 32" wide. This is measured at the mounting holes on center which you can see from the attached photo. view full answer...
I confirmed with my contact at StrombergCarlson that their Lend-a-Hand Folding RV Handrail, part # AC-300, and the similar aluminum version, part # AM-200, can both fold either to the left or to the right.
These two products differ in that the AC-300 uses a stainless steel handle with aluminum mounting blocks that secure with 4 screws, while the AM-200 uses an aluminum handle and plastic mounting blocks that secure with 2 screws.
Both products need to be mounted to a solid surface such... view full answer...
I do have an option for you but all of our entry door latches like the Global Link RV Entry Door Locking Latch Kit part # 295-000019 which is what I recommend are for 1-1/4" - 1-1/2" thick doors. Therefore, if you have a thinner door you would need to make up a set of spacers or shims to fill the gap so you can properly tighten down the screws. The latch cutout dimensions are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. view full answer...
The Roadmaster Hitch Mounted Spare Tire Carrier # RM-195225 pivots down 90-degrees as shown in the photo, but specific rear door clearance on your RV would depend on several factors so we cannot guarantee your rear doors would still be able to open. The things that matter are the tire size on the RV and of course the spare, the hitch height and the RV's own stance above ground, which is a function of the total load in it.
My contact at Roadmaster hears customer comments all the time on... view full answer...
I can't tell you if the Global Link RV Entry Door Latch Kit # 295-000019 fits your 2010 Keystone Raptor because we aren't always able to find exact replacement part numbers for small parts on an RV.
However, I can tell you that it is a direct replacement for the following parts:
Bauer BP-8RV and NE
Fastec (FIC) 43610
Trimark 060-0201 and 060-0251
The latch fits doors that are 1-1/4 to 1-1/2 inches thick and cutouts that are 2-1/2 inches wide by 3-1/2 inches tall to 3 inches wide and... view full answer...
The only type of shower door wheels/rollers we carry are the RV Shower Door Rollers part # 37281745 which can be made compatible with most applications. Unfortunately, we cannot confirm fit on any one particular make/model. view full answer...
The SolidStep Manual Fold-Down Steps # LC678044 that you referenced is for RV doorways that are about 30" wide. Since the door on your camper is 24" wide inside the frame you want part # LC678040 instead which is built specifically for RV doorways that are 24" - 26" wide. view full answer...