Although the etrailer hitch is custom fit for the Pacifica and is designed to handle up to 400 lbs of tongue weight, the Pacifica is not rated for that much tongue weight. I researched the owner's manual for the 2017 Chrysler Pacifica and the maximum tongue weight for the without a trailer tow package is 149 lbs of tongue weight. The maximum tongue weight for a Pacifica with a trailer tow package is 360 lbs of tongue weight. If you use an exterior lift to lift the motorized wheelchair,... view full answer...
Since the total weight of your kayaks is 139.2 lbs and your 2017 Chrysler Pacifica Limited is rated for 150 lbs then you can definitely transport all 4 on your roof!
For your application I do recommend using the Rhino-Rack Nautic # RRS520 over the Thule Stacker # TH830 because it isn't as wide which will help with your crossbar space.
You can use the Rhino-Rack Anchor Straps # RRRBAS-2 for attachment points at your hood and hatch and then the Rhino-Rack Cam-Buckle Cinch Strap and Anchor... view full answer...
The best trailer wiring harness we have for your 2018 Chrysler Pacifica L is the Curt Tail Light Converter with 4-Pole Flat Trailer Connector part # C56236. This kit will require you to splice into the vehicle's factory taillights but as there is not a custom plug and play kit available for the L trim package this will be your only option.
In order to find the correct circuits to splice into on your Pacifica you will need to obtain a circuit tester. While you have the signal active, you... view full answer...
The best option will be to use an adjustable trailer hitch for RV's which will mount to your frame instead of the bumper. This is going to be a much stronger and sturdier option.
If your frame is between 18" to 51" Wide then you can use the Adjustable Width Trailer Hitch Receiver for RVs # C13702. If your frame is between 22" to 72" Wide then you can use the Adjustable Width Trailer Hitch Receiver for RVs # 13703.
This would allow you to use the bike rack you already have, as long as... view full answer...
Nice Shrimp Trailer! The only information I have been able to find on Shrimp trailers is they were made in Canada but are no longer in production. The Hudson Bay company was based in Canada and was bought out in 2008. view full answer...
For your 2006 Chrysler Pacifica with a 3.5 liter engine the correct Kat's block heater is the part # KH11814. The cartridge location you need to use is right behind the engine block on the driver side. So the side of the engine that faces the firewall and all the way on the driver side. We do not have a picture of it unfortunately. view full answer...
The Curt Trailer Hitch # C13383 will work with your 2019 Chrysler Pacifica Hybrid. Once using the fit guide you can then go to the top end of the page and choose between including or excluding Hybrid. I've included an install video of the Curt trailer hitch to give you some more info about the install.
If you aren't set on buying the Curt hitch, our Class III Trailer Hitch # e98903 will work with the Hybrid models as well.
Depending on what you plan on using with your hitch, here are... view full answer...
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118712 is a fit and a wise option for your 2018 Chrysler Pacifica. It fits Hybrid, Limited, Touring L, Touring L Plus, and Touring Plus. I believe the S model is included in these trims.
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118723 is a fit for LX and Touring models. view full answer...
For your 2022 Chrysler Pacifica with a 2" bike rack I recommend the etrailer Trailer Hitch Receiver # e98903. This hitch is made in the USA, has a bolt-on, no-drill installation and a nice matte black finish. But most importantly, this hitch has a 2" hitch receiver which is the most common size used for hitch mounted accessories like your bike rack. view full answer...
The distance from the bottom of the etrailer.com Trailer Hitch Receiver part # e98903 to the ground on a 2018 Chrysler Pacifica is going to be around 11" give or take as this can vary slightly by vehicle. I don't have any info as to whether or not this is the lowest point but you can use the above measurement to determine this for yourself. The trailer hitches available for your Pacifica all install in about the same place so the ground clearance will not really change between brands. I... view full answer...
The etrailer.com Trailer Hitch Receiver part # e98903 for the 2017 - 2019 Chrysler Pacifica is rated for 4,000 lbs of trailer weight. However, you are only as strong as your weakest component which in your case is the vehicle. If your Pacifica came with a trailer tow package, you can tow 3,600 lbs with a trailer tongue weight of 360 lbs. If the vehicle did not come with a tow package it can tow 1,500 lbs with a trailer tongue weight of 149 lbs. You want to make sure the loaded weight of... view full answer...
Yes, the Thule Locking Cylinders, # TH450400, will fit the Thule Tracker II Feet, # TH430. Thule calls their locking system the One Key System. Any Thule product that says it can use the One Key System would use the same locks. view full answer...
We do have a trailer hitch receiver as well as wiring that will fit your 2020 Chrysler Pacifica Launch Edition. I was able to confirm with the manufacturer that the following hitch and wiring harness are a fit for your exact Pacifica:
- Curt Trailer Hitch Receiver # C13383
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56322
Both will fit your 2020 Pacifica Launch Edition perfectly, and I have added a link below to a video install of the hitch for you... view full answer...
If you take a couple of quick measurements, you can easily determine if the Thule # TH629807 Motion XT roof cargo box would be compatible with the factory crossbars on your 2018 Chrysler Pacifica.
You'll first want to determine the crossbar spread, or the front to back distance between the middle of the front crossbar and the middle of the rear crossbar. If this distance is between 23-5/8 and 36-7/8 inches, or can be adjusted so it is, and the crossbars aren't more than 3-1/2 inches wide... view full answer...
We do offer a concealed-style Curt Class III hitch that will fit your 2020 Chrysler Pacifica, but the # C65CR that you'd looked at isn't compatible with the Hybrid model. For the Hybrid, you'd want to go with the similar
# C29UR.
The hitch includes all necessary hardware to complete the installation, and really the only specialty tool needed would be a torque wrench that can be borrowed from a neighbor/friend/relative or the loan a tool service offered by many auto parts stores. The instructions... view full answer...
I checked with Thule's online fitguide and with their hardcopy 2018 fitguide that I have in my desk and both show that the ProRide part # TH598004 is a confirmed fit for the factory crossbars of your 2017 Chrysler Pacifica. I won't bore you with the details, but when looking at the fitguide in my desk I could see how easily it would be to confuse the fit for your vehicle as at first glance it looks like a "no fit". But that's only because it's organized strangely on the page. view full answer...
No one has complained about etrailer trailer hitch # e98903 interfering with the automatic lift gate feature on the 2017 Chrysler Pacifica. On other vehicles with the same feature some people had minor issues (the sensor area was limited after the hitch was installed) and others who did not. I have linked a video showing an example installation of this hitch for you. view full answer...
There's actually a third custom wiring harness that fits the 2017 Chrysler Pacifica. As to which you need depends on which trim package you have:
Draw-Tite part # 118712 fits the Limited, Touring L, and Touring L Plus models.
Draw-Tite part # 118723 fits the LX and Touring models.
Curt part # C56322 fits the Limited, LX, Touring, Touring L, and Touring L Plus models.
There are also several Class III trailer hitch receivers:
etrailer part # e98903 fits both hybrid and non-hybrid models.
Curt... view full answer...
The Curt T-Connector Vehicle Wiring Harness # C56322 is a fit for some 2021 Chrysler Pacifica models but since you have the Hybrid you'll need a splice-in connector like the Curt Powered Tail Light Connector # C59236. This will need to be spliced into your OEM wiring so if that's something you aren't comfortable with then you might see if a local shop will be willing to do the installation for you. view full answer...
We can definitely get your 2022 Chrysler Pacifica Touring set up with a Class III, 2 inch trailer hitch receiver as well as a 4-way wiring harness. Let's go ahead and start with the hitch, and the correct fit is from Curt:
- Curt Trailer Hitch Receiver # C13383
Then for the 4-way and mounting bracket, the correct fit for your 2022 Pacifica Touring are the following:
- T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56399
- Mounting Bracket 4-Pole Flat # 18144 view full answer...
Go To Results