I have a solution for you but the Curt item # C60652 will not fit your 1993 Chevrolet C/K Series truck. Instead you will want the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit item # C60713. This kit fits both the 6-1/2' and 8' bed models not the cab and chassis model. view full answer...
Yes, the Curt trailer hitch part # C14081 that you referenced is a confirmed fit for your 1990 Chevy C1500 Stepside. We actually had a customer come back with the GMC version of your truck and leave us a review saying that this hitch worked well for him.
I attached a picture of this review for you to check out as well. view full answer...
The Draw-Tite Class III 2 Inch Hitch, part # 75099, will fit the 1988 to 2000 Chevrolet and GMC C/K Series Trucks. So, it will fit a 1998 and 1999 Chevrolet Classic truck.
Some other items you may need to complete your towing setup are listed below.
Draw-Tite Ball Mount, part # 2753
Pin And Clip, part # PC3
Tow Ready 2 Inch Hitch Ball, part # 19247, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19260
Tow Ready T-One Wiring Harness, part # 118315
I am including a link to the installation... view full answer...
If you have a 6-1/2' bed on your 1994 Chevy K2500 then the B&W Gooseneck Hitch that fits is part # BWGNRK1050. If you already have the hitch part # BWGNRC950 then you simply need the bracket kit # BWGNRM1050.
If you have the 8' bed on your K2500 then the B&W Gooseneck hitch that fits is part # BWGNRK1000 with the hitch part being # BWGNRC800 and the brackets being # BWGNRM1000.
The center section is specific to the vehicle so if you aren't sure what you have or if it is the incorrect... view full answer...
The Curt Universal Installation Kit # C57186 is universal and will work on your 1997 Chevrolet Silverado 1500. It does not have a mounting bracket for the 7-way and will require you to already have a 4-way Trailer Connection # C55315.
I recommend using the Universal Installation Kit for Trailer Brake Controller # ETBC7. Our kit will include the mounting bracket for the 7-way and on the trailer connector there is a separate connector for 4-way trailers. This means that you will not need... view full answer...
The best trailer hitch option we have for a 1964 Chevrolet C10 Pickup is the Curt Trailer Hitch Receiver part # C14082 which is designed for models with the standard bumper. It only has a Class IV rating but this gives you a 10,000 lb weight capacity which you really shouldn't be getting anywhere close to due to the constraints of the vehicles pulling capacity. view full answer...
The 1999 GM trucks were part of a split model year. Some still had the C or K designation like yours and others started using the Silverado name. Harness # 3025-P is confirmed to fit the Silverados but not the C/K series. The harness does work with the P3 brake controller # 90195.
If your truck already has a factory installed 7-Way trailer connector then it is possible that you can plug in the controller but if that does not work then the controller will have to be hardwired in using installation... view full answer...
For a long-bed Chevy 3500 we offer several options in gooseneck hitches that can be seen on the link provided. Their fits will vary slightly depending on the frame width of your truck; certain hitches will not fit 34-inch wide frames and this is noted. The particular Draw-Tite Gooseneck # 9465-40 that you referenced will fit without this limitation and offers 30K gross trailer weight capacity.
For your reference I have linked both the written instructions and a video.
If you expect to... view full answer...
The fifth wheel above-bed rails that are designed for your 1995 Chevrolet C/K truck are part # RP30035. These rails have universal brackets and work with most hitches.
The rail kit , part # BWRVK2500 you came from have custom brackets and are not designed to fir your truck. view full answer...
Yes, the Curt E16 5th Wheel Trailer Hitch item # 16516 is compatible with the B&W Universal Base Rails item # BWRVR3200. I have included a link to a review for this hitch. view full answer...
It sounds like you may have industry standard rails which have side to side measurement of 20-1/2" and front to back measurement of 22" as shown in the included diagram.
If this is the case I recommend the Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000 lbs # C16521 if your truck has the 6-1/2' bed or the fixed version # C16120 if your truck has the 8' bed.
The Curt A16 is a fantastic option due to the interlocking two jaw system that offers 360 degrees of king pin... view full answer...
According to my Curt representative, he had the # C13082 installed on his 1998 K 1500 with a 8 foot bed, and it did NOT interfere with the spare tire at all, and he used a slightly larger tire size than the 265/75-16. This is contrary to install instructions, which state that the spare might need to be repositioned slightly forward and it might not be the case on a short bed truck. The other Curt choice would be the # C15325 which I'm told would clear a stock spare tire. This hitch is a... view full answer...
The Westin Fey Diamondstep Rear Bumper part # 71000 does not come with the mounting hardware and brackets. In order to install a bumper like this on your 1985 Chevrolet C/K Series Pickup you will want to use the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit part # 21000-92230 instead.
Please keep in mind that the actual bumper has a chrome plating, not the hardware. view full answer...
Since the tire size of 205/75D15 like # AM1ST92 fits 6 inch wide trailer wheels like the size you mentioned having this would work. view full answer...
The Air Lift SlamAir Air Helper Springs for Lowered Trucks part # AL59106BT is designed for a 1988 Chevy C10 with modest drop of around 2-3". It is not designed for a truck that has been lowered more than this or with the frame modified i.e. a c-notch. That said, that's not to say it cannot be used with such you'd just need to be aware that some retrofitting may be required. We do not have any other air bags for this vehicle with a drop unfortunately. view full answer...
The Curt # 41901 will fit if your truck has a long (8 foot) bed and doesn't have a roll pan bumper.
If you have a short bed truck, the Curt # C14081 will work unless you have a roll pan bumper. If your spare tire is on a wheel larger than an 18 inches, the spare tire won't fit under the truck with the hitch in place. view full answer...
The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 20009-92230 that you referenced is designed to fit 1988-2000 Chevy and GMC C/K Series Pickup Trucks so it will be a fit for your 1997 model. view full answer...
I contacted Thule and they advised that the rack for you 1996 Chevrolet C/K Series Pickup you currently have is an older model from the 90's and unfortunately they no longer have any parts for it.
Since there are no longer parts available for your current rack I recommend going with a new rack like the Erickson Truck Bed Ladder Rack w/ Load Stops Item # EM07705. It is a bolt on application and requires no welding or drilling, is an aluminum construction with an 800lb weight rating. It... view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1000 will fit your 1996 Chevy C/K3500 long bed dually just fine!
The only thing that you'll need different for the dually setup is you need to get the Extended Latch Pin Handle # BWGNXA1800 so it's easier to access in the wheel-well. view full answer...
Hellwig lists the Hellwig Rear Anti-Sway Bar # HE36MR as the correct fit for a 1998 Chevy K2500. As for fitment with the staggered shocks, you shouldn't have any issues and can even see this setup in the attached installation picture below.
The only other issue would be fitment with your air springs. The bar is going to sit just behind the axle mount so it's really going to come down to just how far the bottom mounting bracket of your air spring sticks out. Based on the compatible Air... view full answer...
Go To Results