I attached a picture that shows the distance between the mounting holes of the replacement ball plate assembly part # RP58062 that you referenced. view full answer...
The highest capacity trailer hitch we offer for your 2000 Toyota Tundra is the Draw Tite part # 37130 which has a 7,000 lb towing capacity. The price is available at the product link below. view full answer...
If your Tundra maximum tongue weight (at your Tundra receiver) is 880 pounds and then you attach the Brophy # ST18 extension, then your maximum tongue weight at your Tundra receiver is reduced from 880 to 586 pounds. However, the receiver on the Brophy extension sticking out is only 350 pounds, so you have to go with the lower of the two: 350 pounds.
If you attach a cargo carrier that weights 40 pounds by itself, then you have 360 pounds left available for actual cargo to put on the carrier.... view full answer...
I am a big fan of the Cipas so I recommend the CIPA Custom Towing Mirrors item # CM11300 for your 2018 Toyota Tundra Platinum. These mirrors slip over your existing mirrors and are secured with the included knob. These install easily and give you a great viewing angle when towing. The driver side and passenger side mirrors are included in the package.
We had a 2018 Toyota Tundra in the shop awhile back and I have linked a video below that will show you exactly how to get these installed... view full answer...
Yes, it will. The Yakima LongArm Truck Bed Load Extender item # Y01149 will work perfectly with your Tundra's 2" hitch receiver.
I have linked a review video below so you can see this extender in action.
You can use the Crossbar Pad item # Y07417 to protect whatever you're hauling from scratches. view full answer...
It doesn't look like the Curt front hitch part # 31198 would fit your 2001 LX470. The measurements of this hitch are 38-7/8 inches from side to side, 2 inches from front to back 1-7/8 inches from the mounting flange to the cross tube. view full answer...
The distance between the mounting holes on the Valterra Flush Mounted Telescoping Water Inlet part # R920TW is 2-1/2" on center left to right and top to bottom. I have attached a video for you with these exact measurements. view full answer...
To add a tonneau cover and ladder rack to your 2024 Toyota Tundra with a 6-1/2' bed you will want the following parts:
Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters item # Y01151-5955
RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots item # RTX47XR view full answer...
A trailer of the size you mention would either use a 2 inch or a 2-5/16 inch ball. A 2 inch ball can have a capacity up to 8000 lbs, while the capacity of a 2-5/16 inch ball can range between 6,000 and 30,000 lbs. The 2-5/16 inch ball would be more likely, but I couldn't say for sure without knowing the weight of the trailer.
Using a tri-ball mount like the # C42KR you referenced might be your best bet.
The required ball size should be stamped into the metal on the trailer coupler. view full answer...
The Prodigy P3 item # 90195 is compatible with your 2017 Toyota Tundra. This is a proportional brake controller that activates your trailer's brakes when your Tundra decelerates.
You will want to use the Custom Wiring Adapter for Trailer Brake Controllers item # 3031-P to complete your installation without cutting or splicing wires. view full answer...
The hitch pin hole of the LSU Hitch Cover # AMG100246 is about 2-1/2 inches from the back of the front plate and about 7/16 inches to the back of the shank. view full answer...
Since the distance between your tires is larger at 13-1/2 inches the Super Grip Chock XL Wheel Stabilizers # UF21-001095 is what you'd need as it fits a distance of up to 17 inches between the tires.
I attached a picture of what this looks like installed as well as a review video that shows how it installs as well. view full answer...
The Bulldog Sidewind Crank, # BD8001090283, will fit on a shaft diameter of 1 inch. It is designed to be used on the Bulldog Heavy Duty 2-Speed Tandem Landing Gear, # BD500153 and # BD500154. Though it could be used for your application if no other handle will fit. You would just have to use washers to compensate for the 1/4 inch difference between the shaft and the handle. view full answer...
I confirmed with Curt that the Replacement Head for Curt MV Weight Distribution Systems # C17075, has a Gross Trailer Weight (GTW) capacity of 14,000 lbs and Tongue Weight (TW) capacity of 1,400 lbs. view full answer...
In regards to the Stromberg Carlson Exterior RV Ladder part # LA-401, the distance from the trailer to the ladder will be about 4-7/8" as that is the length of standoff shown below. view full answer...
On the DeeZee Custom-Fit Truck Bed Mat # DZ86985 the width at the narrower center portion is 48-inches. The width at the widest part is approximately 64-1/2-inches. The overall length is 66-inches. view full answer...
I went out to the warehouse and measured the Replacement 2 Inch Shank for Swagman XC Series 2 Bike Carriers, # P249. The overall length is 19 inches. The center to center distance between the pin holes is 16 inches. I have included a picture showing these measurements. view full answer...
The Ark Drop Down Corner RV Stabilizer Jacks - 2' Long Corner Steadies - Qty 2 # AR34FR you were looking at does not have a weight rating, as they are not designed to hold or lift the weight of your trailer.
They are instead designed stabilize your trailer, which does not put nearly as much weight on them.
I included a video of the # AR34FR for you to take a look at. view full answer...
I measured the Replacement Rubber Fastener for Titan Chain Diamond Pattern Alloy Tire Chains # TCRE-1 to find the overall length, and I found that from end-to-end, the fastener measured about 5-3/4 inches.
Keep in mind that this chain is only designed to work with the Titan Chain 1500 and 2300 Series pull-tight chains and will only fit chain links that are up to 0.145" (3.7 mm) thick. view full answer...